Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 81 for “"ZnTe"”.
-
Partial Pressure of Zn Over Te-Saturated ZnTe
The partial pressure of Zn over Te-saturated ZnTe(c) was measured up to 635°G by measuring the optical absorbance of the vapor phase at the wavelength of 213.9 nm. The experimental technique consisted of measuring the optical absorbance at 213.9 nm of a sealed optical cell of known optical path …
-
Growth and Characterization of ZnSe and ZnTe Alloy Nanowires
… and characterization of high quality binary ZnTe nanowires with great potential for development of optoelectronic devices including high efficiency photovoltaic cells for energy conversion and high sensitivity photodetectors for green fluorescent protein bioimaging at single molecule level. …
-
Optical and Electrical Analysis of ZnO/ZnTe Micropillar Solar Cells
… is to compare three different structural ZnO/ZnTe solar cell types (planar, axial micropillar and radial micropillar). The best optical and electrical performance has been obtained by the radial junction (core-shell) ZnO/ZnTe micropillar solar cell due to its pillar structure and radial …
-
Growth and Characterization of CdTe/ZnTe Thin Films and Heterostructures
CdTe and ZnTe are common semiconductors, currently used in a wide variety of applications. Heterostructures, composed of two or more layered materials, create further potential for the use of these semiconductors in the development of new technologies. In this thesis, the epitaxial growth of …
-
Research and development of CdS/CdTe solar cells incorporating ZnTe layers.
… cadmium telluride (CdTe) and zinc telluride (ZnTe).All of these layers were obtained by growing them using electrodeposition in aqueous solutions. In this project, electrodeposition using 2-electrode system was employed to deposit all of the semiconductors. The decision was taken to avoid …
-
RF magnetron triode sputtering of CdTe and ZnTe films and solar cells
… generation. One possible solution is to use p+-ZnTe as an interlayer between CdTe and the back contact. ZnTe is easily doped with Cu to be p-type. However, even contacts with this ZnTe interlayer degrade over time, because Cu is highly mobile and diffuses away from the contact towards the …
-
RAMAN SPECTROSCOPY CHARACTERIZATION OF PULSED LASER DEPOSITION GROWN ZNTE THIN FILMS ON SAPPHIRE SUBSTRATE
… structure. In this thesis, the epitaxy of ZnTe thin films on sapphire substrate by Pulsed Laser Deposition system at different growth temperatures is studied. The texture analysis is inspected by Two Dimensional X-Ray Diffraction. The lattice constant of the films and strain studies are …
-
Properties of Type-II ZnTe/ZnSe Submonolayer Quantum Dots Studied via Excitonic Aharonov-Bohm Effect and Polarized Optical Spectroscopy
… physical and material properties of type-II ZnTe/ZnSe submonolayer quantum dots (QDs), grown via combination of molecular beam epitaxy (MBE) and migration enhanced epitaxy (MEE). I use magneto-photoluminescence, including excitonic Aharonov-Bohm (AB) effect and polarized optical spectroscopy …
-
Copper Doped Window Layer for CdSe Solar Cells
CdSe solar cells with ZnTe as the window layer deposited by CSS process have shown Voc's around 630mV. However the currents were very low and also the voltages were not meeting the desired objectives. To improve the performance the contact energy at the ZnTe/Cu interface should be minimized by …
-
II-VI Core-Shell Nanowires: Synthesis, Characterizations and Photovoltaic Applications
… including ZnO/ZnSe, ZnO/ZnS, and CdSe/ZnTe, have been synthesized and the photovoltaic devices processed from a ZnO/ZnS core-shell nanowire array and a single CdSe/ZnTe core-shell nanowire have been demonstrated. By combining the chemical vapor deposition and pulsed laser deposition …
-
Journey towards CdTe-based graded band gap electrodeposited solar cells on P-type window
… phase of this work, firstly, CdTe:Mg, CdMnTe and ZnTe layers are electrodeposited on glass/FTO surface, characterised, optimised and compared to be the p-type wide band gap window layer. ZnTe layers have been grown both in n-type and p-type with reasonably good crystallinity and selected as the …
-
Optoelectronic devices based on graded bandgap structures utiliising electroplated semiconductors.
… materials explored in this research are CdSe, ZnTe, CdS, CdMnTe and CdTe thin films. These layers were characterised for their structural, compositional, morphological, optical, and electrical features using XRD, Raman spectroscopy, EDX, SEM, UV-Vis spectroscopy, PEC cell, C-V, I-V and UPS …
-
Optoelectronic devices based on graded bandgap structures utilising electroplated semiconductors
… materials explored in this research are CdSe, ZnTe, CdS, CdMnTe and CdTe thin films. These layers were characterised for their structural, compositional, morphological, optical, and electrical features using XRD, Raman spectroscopy, EDX, SEM, UV-Vis spectroscopy, PEC cell, C-V, I-V and UPS …
-
Development of Materials and Structures for p-type Contacts in CdTe Solar Cells
… systems, namely Cu2Te thin films and CdTe/ZnTe strained-layer superlattices, are investigated for their potential use as ohmic contacts in CdTe solar cells. A detailed analysis of the optical, electrical, and structural properties of Cu2Te thin films deposited by magnetron sputtering is …
-
Development of Window Layer for High Efficiency High Bandgap Cadmium Selenide Solar Cell for 4-Terminal Tandem Solar Cell Applications
… However, doping could not be accomplished. ZnTe is easily dopable, and was the next alternative. ZnTe doping in presence of Nitrogen plasma resulted in Zn rich films. Hence doping of the ternary compound ZnSexTe1-x was considered. This work focuses on studying the effects of compositional …
-
Optical detection of paramagnetic and cyclotron resonance in semiconductors
… of photo-excited electrons and holes in GaP, ZnTe and AgBr. Paramagnetic resonance of conduction electrons in GaP has been studied and the microwave frequency and power dependence of the effect analysed. The maximum signal strength was observed to produce approximately 1% change in …
-
Improvements in thin film CdTe back contact and interface layers through sputter deposition of metals and semiconductor materials
… study explored the option of zinc telluride (ZnTe) as a buffer layer between the CdTe and metal back contact. Copper doping assists in the CdTe device performance, however too much copper can be detrimental to device performance. The ZnTe layer allows for better valence band alignment and …
Page 1 of 5