Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 63 for “"Zone method"”.
-
Interfacial Characterization of Fibrous Composites by Cohesive Zone Method
… model was built to examine validity of cohesive zone elements of the FE package. Properties of the interface were incorporated into the second model with the help of experimental pull-out test results. A parametric study of the cohesive zone was conducted by variation of its characteristics in …
-
Plane frame stability analysis based on the inelastic zone method
A new method of structural stability analysis which accounts for the spread of inelasticity along structural members is presented in this thesis. This method is called the inelastic zone method and is employed here to investigate the behaviour of metal plane frames loaded to failure. For a given …
-
Evaluation and development of the zone method for modelling metal heating furnaces
The zone method of radiation analysis in hot enclosures has been widely applied to the modelling of industrial fuel-fired J plant. Many of these models apply a single zone or a longitudinal series of zones (a long furnace model) to represent the hot enclosure. In the latter case, radiation …
-
An Investigation of Interfacial Behaviour in Steel-Concrete Composite System by Cohesive Zone Method
… composite system is modelled with cohesive zone model (CZM). The research objective is to effectively and efficiently model both mechanically connected and adhesive bonded steel-concrete interfaces. A novel tri-linear CZM and an effective damage formulation to account for mode mix is …
-
Physical properties of transition metal oxides synthesized by floating zone method and spark plasma sintering
… crystals of Y₁₋ₓLaₓTiO₃ are grown by floating zone method to study the magnetic transition from ferromagnetic in YTiO₃ to G-type antiferromagnetic in LaTiO₃. Y₁₋ₓ LaₓTiO₃ shows similar magnetic phase diagram with RTiO₃ family, and the magnetism and the transition temperature can be finely tuned …
-
Crystal growth of the cuprate superconductor La1.6-xNd0.4SrxCuO4 by the traveling solvent floating zone method
… x]CuO₄ by the travelling solvent floating zone method will be described. The availability of high quality single crystals is essential to facilitate experimental studies of high temperature superconductivity in the cuprates. Repeated attempts gradually lead to crystals with the improved …
-
Recommended Modified zone Method Correction Factor for Determining R-values of Cold-Formed Steel Wall Assemblies
Currently, ASHRAE has determined the zone method and modified zone method are appropriate calculation methods for materials with a high difference in conductivity, such as cold-formed steel (CFS) walls. Because there is currently no standard U-Factor calculation method for CFS walls, designers and …
-
Development of a fatigue-compatible cohesive zone method for a copper-epoxy molding compound bimaterial interface
… of a computationally affordable modeling methodology with predictive capability towards fatigue crack propagation and failure is needed. This present work focuses on copper/epoxy mold compound (EMC) interfacial delamination under fatigue loading both through experiments as well as …
-
Application of the zone method of radiation analysis to simulation of the non-steady state operation of metal reheating furnaces
The zone method for analysing radiative heat transfer has been widely applied for furnace modelling, and is extensively reported in the open literature. The main reason for the application of this method lies in the accuracy with which it solves the radiant transfer in hot enclosures. Thus, it is …
-
Zone method for determining heat transfer and temperature field for a coal-fired MHD field for a coal-fired MHD combustor
<p>A method of estimating heat losses to the walls of a coal-fired MHD combustor and of predicting temperature distributions within the combustion flame is investigated in this work. The importance of temperature of combustion products and combustor heat losses to the MHD energy conversion process …
-
THE DESIGN OF NATURALLY VENTILATED SPACES USING MULTI-ZONE AIRFLOW SIMULATION : THE ARCHITECTURAL IMPLICATION ON THE SCHEMATIC STAGE OF THE DESIGN PROCESS
… prediction of natural ventilation design, Multi-zone method and Computational Fluid Dynamics (CFD). The Multi-Zone method is a bulk airflow simulation that is able to give a year round performance report of natural ventilation, while CFD is a more precise and detailed airflow model that can only …
-
Application of mathematical model techniques to the planning and control of overhead costs in the construction industry
… ';. The aim of this research-. has been to study methods. of overhead costs planning and control that are in use in the construction industry, the limitations of these methods as effective tools, and to propose new methods which could be practical to apply. The method of overhead costs planning …
-
An Improved Mathematical Model to Simulate the Stock in Pulse Fired Reheating Furnaces
The zone method of radiation analysis has been widely used in the steel industry to develop mathematical models to simulate the temperature performance of furnaces.<br/><br/>The zone method can provide an accurate calculation of the radiation exchanges, which are the main mode of heat transfer in …
-
ΣΥΜΒΟΛΗ ΤΗΣ ΑΝΑΛΥΣΗΣ ΔΟΡΥΦΟΡΙΚΩΝ ΕΙΚΟΝΩΝ LANDSTAT-5/TM ΚΑΙ ΤΩΝ ΓΕΩΓΡΑΦΙΚΩΝ ΣΥΣΤΗΜΑΤΩΝ ΠΛΗΡΟΦΟΡΙΩΝ (GIS) ΣΤΗΝ ΤΕΚΤΟΝΙΚΗ-ΓΕΩΜΟΡΦΟΛΟΓΙΑ ΠΕΡΙΟΧΩΝ ΤΟΥ ΒΟΡΕΙΟΕΛΛΑΔΙΚΟΥ ΧΩΡΟΥ
… IMAGE INTERPRETATION. FOR THE FIRST TIME TWO NEW METHODS WERE DEVELOPED AND PROPOSED: A) THE "CROSS-PROFILE METHOD" AND B) THE "CONTROL ZONE METHOD". BY APPLYING THESE TWO METHODS TO THE OLYMPUS MT. AREA, A NEW MAP PRESENTING THE LINEAMENTS WHICH REFLECT THE PRESENCE OF FAULTS WERE CREATED. ALSO …
-
Adaptive insertion of cohesive elements for simulation of delamination in laminated composite materials
… of composite laminates. Various numerical methods for simulating delamination in composite materials do exist, but they are generally limited to small-scale structures due to their complexity and high numerical cost. In this thesis, a novel technique aimed to allow efficient simulation of …
-
Modelling Hydraulic Fracturing Propagation in Heterogeneous Reservoirs Using Cohesive Zone Methods
… into the reservoir. This research uses cohesive zone method to numerically simulate hydraulic fracture propagation in the presence of natural fractures in two- and three-dimensional model. The Cohesive element approach limits fracture propagation to some predefined paths. However, in highly …
-
Modeling of Debonding and Crack Propagation in Fibrous Composites Using a Discontinuous Galerkin Approach
… recently proposed Discontinuous Galerkin (DG) method for modeling debonding and fracture within the context of the finite element method is investigated for problems relating to fiber reinforced composites, namely fiber-matrix interfacial debonding which progresses to matrix fracture. The …
-
POROELASTIC AND POROPLASTIC MODELING OF HYDRAULIC FRACTURING
… The reasons are that the fracture process zone ahead of the crack tip, elasto-plastic material behavior and strong coupling between flow and stress cannot be neglected in these formations. In this study, we developed a fully coupled poroelastic and poroplastic hydraulic fracturing model …
Page 1 of 4