Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 10 of 10 for “"Zrb2-sic"”.
-
Ceramic multilayer based on ZrB2/SiC system for aerospace applications.
… on the processing and characterisation of ZrB2/SiC based multilayer materials, produced by tape casting and sintered without pressure assistance for aerospace applications. The multilayer components were processed in order to be used as external part of a thermal protection system; because …
-
Processing-Microstructure-Properties Relationships in Additively Manufactured Zrb2-Sic Ceramics
… sintering (PS) and chemical compatibility of ZrB2-30 vol.%SiC produced by additive manufacturing (AM) with CO2. The oxidation kinetics and scale microstructures were compared for ZrB2-SiC made by hot pressing (HP) and by AM coupled with PS. All specimens exhibited parabolic oxidation kinetics. …
-
Mechanical Properties And Thermal Residual Stresses Of Zrb2-sic Ceramic Composites For Hypersonic Vehicle Applications
Ultra High Temperature Ceramic (UHTC) ZrB2- 10, 20, 30wt%SiC composites are of high interest for use in hypersonic air-breathing vehicles. In this work, ZrB2- 10, 20, 30wt%SiC UHTC composites were produced by the Spark Plasma Sintering (SPS) technique. After sintering, almost dense ceramics with ~ …
-
ZrB2-SiC Based Ultra High Temperature Ceramic Composites: Mechanical Performance and Measurement and Design of Thermal Residual Stresses for Hypersonic Vehicle Applications
Ultra-high temperature ceramics (UHTCs), such as ZrB2-based ceramic composites, have been identified as next generation candidate materials for leading edges and nose cones in hypersonic air breathing vehicles. Mechanical performance of ceramic composites play an important role in the ultra-high …
-
Processing for Improved Creep Behavior of Ultra-High Temperature Ceramics
… under long exposure to severe conditions. ZrB2-based composites consistently compete with the other candidates for these applications due to their high melting temperatures (exceeding 3000°C), high temperature strength retention and good oxidation resistance. Long duty cycle aerospace …
-
Sintering techniques for microstructure control in ceramics
… carbide as a secondary or tertiary phase in ZrB2 and ZrB2 – SiC. Addition of zirconium carbide was observed to increase flexural strength of composites up to 590MPa at 50wt% ZrC, significantly higher than the flexural strength of 380MPa observed in similarly prepared ZrB2 – SiC. This …
-
Oxidation of zirconium diboride based and molybdenum based ultra-high temperature ceramics
… Among these materials, Mo-Si-B alloys and ZrB2-SiC composites have received a lot of attention due to the formation of a protective scale at elevated temperatures.</p> <p>In ZrB2-SiC system, improving the oxidation resistance at elevated temperatures has long been a challenge. At …
-
Creep Behavior of a Zirconium Diboride-Silicon Carbide Composite and Preliminary ZrB2-WC Quasi-Binary Alloy Development for Long Duty Cycle Aerosurfaces and Structural Propulsion Applications
… environment aerospace applications. Hot-pressed ZrB2-20 vol% SiC composites and ZrB2-WC quasi-binary alloys were developed for assessing room temperature mechanical properties and creep behavior. A thermochemical model describing alloy phase stability and reaction equilibria, for promoting WC …
-
Protective Ultra-High Temperature Coatings/ Ceramics (UHTCs) for Ceramic Matrix Composites in Extreme Environments
… of a protective coating system for Cf/SiC SiCARBONTM (Airbus trademark) materials against very high temperatures in extreme environment. Here, we concentrate on the application of this technology in combustion chambers, for example in orbital thrusters. During combustion, the composite …
-
Processing and Microstructural Characterization of Ultra-High Temperature Ceramics
… diboride with addition of silicon carbide (ZrB2-SiC) ultra high temperature ceramic composite is selected to investigate the effect of cooling rate in SPS on microstructure and mechanical properties. After being densified at the target temperature, ZrB2-25vol%SiC specimens are cooled from …