Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 18 of 18 for “"a flat roof"”.

  1. Full-scale study of wind loads on a flat roof with parapets

    … carried out to examine the effect of parapets on roof wind loading. Most of these studies have been carried out in the wind tunnel and rarely has an effort been made to study this effect in full-scale. A systematic and extensive research has been carried out in the present study to evaluate the …

    concordia Download PDF for Full-scale study of wind loads on a flat roof with parapets (opens in a new tab)

  2. Residential Building

    … is made of precast concrete ytong blocks and a flat roof with a slope of 1 °.

    brno-tech Repository record for Residential Building (opens in a new tab)

  3. Roof pressures in the corner region measured on a full-scale low-rise building

    Corner vortices along the roof have proven to be one of the most destructive forces created when wind interacts with a building. Conical vortices are generated close to the corner along both edges of the roof when the wind angle of attack acts Into the roof corner. To better understand the …

    ttu Repository record for Roof pressures in the corner region measured on a full-scale low-rise building (opens in a new tab)

  4. Development of Large-Scale Particle Tracking Velocimetry: A Comparison Between 2D and 3D Techniques

    … as a baseline for measuring wind flow over a flat roof in a 3m x 3m x 1.5m volume. The LS-PTV (2D) system covered a 1.5m x 3m plane within the same volume. A 3D ultrasonic anemometer was used outside of the measurement volume as a means to validate the LS-PTV measurements. An analytical model …

    queens Repository record for Development of Large-Scale Particle Tracking Velocimetry: A Comparison Between 2D and 3D Techniques (opens in a new tab)

  5. The Effect of Overhang on Wind-Driven Rain Wetting for a Mid-Rise Building

    … failures of building materials and components. Roof overhangs are a common feature that can be used to reduce the amount of WDR on building facades. Experimental studies and CFD modeling have shown that roof overhangs shelter the building facade from WDR. However, there is limited quantitative …

    concordia Download PDF for The Effect of Overhang on Wind-Driven Rain Wetting for a Mid-Rise Building (opens in a new tab)

  6. Comparison of the energy and economic feasibility of different building systems.

    … (HVAC) technologies widely used: Single Zone Roof Top Air-conditioning Unit (RTU), Ground Source Heat Pump (GSHP), Variable Air Volume (VAV) RTU, Demand Controlled Ventilation (DCV), and Natural Daylighting.</p> <p>Each system will be modeled in two different building types. The first being a …

    iastate Repository record for Comparison of the energy and economic feasibility of different building systems. (opens in a new tab)

  7. Modest Modernism : elevating the urbanizaciones of Puerto Rico

    … the new house that everyone wanted had a flat roof and was made of reinforced concrete, with breezy spaces between each house, that took advantage of the tropical climate. These modest versions of tropical Modernist architecture shared similar characteristics to their larger counterparts, …

    texas Repository record for Modest Modernism : elevating the urbanizaciones of Puerto Rico (opens in a new tab)

  8. Reducing the Computational Effort Associated with Evolutionary Optimisation in Single Component Design

    … material distribution on the underside of a flat roof tile with varying load and support conditions. The designs utilise a large number of design variables (circa 400). Due to the high computational expense associated with analysis such as finite element for detailed evaluation, in order to …

    plymouth Repository record for Reducing the Computational Effort Associated with Evolutionary Optimisation in Single Component Design (opens in a new tab)

  9. High fidelity modelling of neighbourhood-scale environments

    Arrays of buildings with pitched roofs are common in urban and suburban areas of European cities. Large-eddy simulations are performed to predict the boundary-layer flows over flat and pitched-roof cuboids to gain a greater understanding of the impact of pitched roofs on urban boundary layers. The …

    soton Download PDF for High fidelity modelling of neighbourhood-scale environments (opens in a new tab)

  10. Σωζόμενοι βυζαντινοί και μεταβυζαντινοί πύργοι στον νομό Θεσσαλονίκης: αρχιτεκτονική διερεύνηση και τεκμηρίωση

    … width of the masonry of one side. Regarding the roof of the towers, the data we have are not enough for a complete documentation, as most of the Byzantine towers are in a dilapidated condition. According to the archeological data so far, the four-sided towers are usually roofed in two ways, …

    greece Repository record for Σωζόμενοι βυζαντινοί και μεταβυζαντινοί πύργοι στον νομό Θεσσαλονίκης: αρχιτεκτονική διερεύνηση και τεκμηρίωση (opens in a new tab)

  11. Planning for Solar Buildings in Urban Environments

    … tools are used in three cases – an analysis of flat roofs, the development of a new facade assessment tool, and an analysis of typical Swedish building blocks. A parametric study was performed to analyse the energy output and financial consequences of varying row distances and inclination angles …

    lund Repository record for Planning for Solar Buildings in Urban Environments (opens in a new tab) Download PDF for Planning for Solar Buildings in Urban Environments (opens in a new tab)

  12. Bytový dům Olomouc

    Předmětem projektu je novostavba bytového domu v katastrálním území Nová Ulice, města Olomouce, okresu Olomouc. Dům je samostatně stojící v ulici Zirmova navazující na ulici Mošnerova. V této ulici již stojí několik bytových domů, které ovlivnily některé parametry řešeného objektu. Zejména se jedná …

    brno-tech Repository record for Bytový dům Olomouc (opens in a new tab)

  13. Rodinný dům - Újezd u Tišnova

    Předmětem bakalářské práce je novostavba rodinného domu s provozovnou autoservisu pro osobní automobily. Dům je navržen jako jednopodlažní, podsklepený s plochou střechou. Dispoziční uspořádání 3+KK odpovídá návrhu pro 4 člennou rodinu. Jedná se o stavbu z keramických tvárnic Porothem, stropní …

    brno-tech Repository record for Rodinný dům - Újezd u Tišnova (opens in a new tab)

  14. Multifunkční dům v Ledči nad Sázavou

    Tato diplomová práce se týká projektové dokumentace Multifunkčního domu v Ledči nad Sázavou. Objekt je čtyřpodlažní a není podsklepen.Budova je navržena jako cihelná stavba ze systému Porotherm v půdorysném tvaru obdélníka s plochou střechou. Krytina bude provedena z měkčeného PVC šedé barvy. V …

    brno-tech Repository record for Multifunkční dům v Ledči nad Sázavou (opens in a new tab)

  15. Sportovní centrum Královo Pole

    Sportovní centrum se nachází v Brně Králově Poli, navazuje na plochu hřiště, které slouží letnímu i zimnímu provozu. Objekt je přístupný z ulice Vodova. Nedaleko se nachází fotbalový stadion, vysokoškolské koleje a tramvajová zastávka Červinkova. Stavba je dvoupodlažní, nepodsklepená s plochou …

    brno-tech Repository record for Sportovní centrum Královo Pole (opens in a new tab)

  16. Vysokoškolské koleje v Olomouci

    Tématem diplomové práce jsou Vysokoškolské koleje v Olomouci. Cílem je především vypracování projektové dokumentace pro budovu Vysokoškolských kolejí v Olomouci. Součástí práce je výkresová dokumentace, textová část a výpočty. Budova je navržena jako samostatně stojící s šesti nadzemními podlažími …

    brno-tech Repository record for Vysokoškolské koleje v Olomouci (opens in a new tab)

  17. Bytový dům

    Ve své diplomové práci zpracovávám projekt samostatně stojícího bytového domu terasového typu, z části zasazeného do terénu. Objekt má 3 nadzemní podlaží, jedno podzemní a je zastřešen plochou střechou. V bytovém domě se nachází šest bytových jednotek a tři garážová stání, včetně technického …

    brno-tech Repository record for Bytový dům (opens in a new tab)

  18. Městský hotel

    V diplomové práci je řešena novostavba hotelu ve městě Brně. Tato práce má za cíl vypracovat projektovou dokumentaci pro provedení stavby. Jedná se o volně stojící objekt v mírně svažitém terénu. Stavba má tři nadzemní a jedno podzemní podlaží. V podzemním podlaží se nachází hromadné garáže a …

    brno-tech Repository record for Městský hotel (opens in a new tab)