Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 150 for “"absorber layer"”.

  1. Evaluation of Absorber Layer Prospects in Lead-Iodide Perovskite Solar Cells

    … and other longevity issues. The absorption layer of the solar cell has been heavily studied with researchers making slight modifications to attempt to cure these issues. The most common absorption layer used in PSCs is comprised of methyl ammonium iodide (MAI) and lead iodide, creating …

    umn Repository record for Evaluation of Absorber Layer Prospects in Lead-Iodide Perovskite Solar Cells (opens in a new tab)

  2. Development Of Cadmium Selenide As An Absorber Layer For Tandem Solar Cells

    … eV. This is one of the suitable materials for an absorber layer in the top cell of a tandem solar cell. CIGS with a low Gallium content has a band gap of 1 eV suits well as an absorber layer for the bottom cell. CIGS cells have already attained an efficiency of 15% [1,2]. Since years, research has …

    usf Repository record for Development Of Cadmium Selenide As An Absorber Layer For Tandem Solar Cells (opens in a new tab)

  3. Effect of Heat Treatments and Reduced Absorber Layer Thickness on Cu(In,Ga)Se2 Thin Film Solar Cells

    … Copper Indium Gallium Diselenide (Cu(In,Ga)Se2) absorber layers is one of the most promising candidates to emerge as an efficient solar cell technology in the near future. CIGS cells with efficiencies of 19.2 % have already been reported [1]. In this study, CIGS absorber layers are fabricated by …

    usf Repository record for Effect of Heat Treatments and Reduced Absorber Layer Thickness on Cu(In,Ga)Se2 Thin Film Solar Cells (opens in a new tab)

  4. Zinc Cadmium Sulphide And Zinc Sulphide As Alternative Heterojunction Partners For Cigs2 Solar Cells

    Devices with ZnCdS/ZnS heterojunction partner layer have shown better blue photon response due to higher band gap of these compounds as compared to devices with CdS heterojunction partner layer. CdS heterojunction partner layer has shown high photovoltaic conversion efficiencies with CIGS absorber …

    ucf Repository record for Zinc Cadmium Sulphide And Zinc Sulphide As Alternative Heterojunction Partners For Cigs2 Solar Cells (opens in a new tab)

  5. Improving Cu(In,Ga)Se2 solar cell absorbers based on atomic-level modeling

    … The defect microstructure of the CIGS light absorber layer influences the optical and electronic properties of CIGS solar cells. The recent progress in their efficiency (up to 23.35 %) is mainly due to the incorporation of different alkali metal atoms into the absorber layer. As efficiency …

    aalto Repository record for Improving Cu(In,Ga)Se2 solar cell absorbers based on atomic-level modeling (opens in a new tab)

  6. ADVANCED REAR CONTACTS FOR THIN-FILM CIGS SOLAR CELLS ON GLASS SUBSTRATES

    … electrode quality via different designs - single-layer Mo films, bilayer Mo structures and modified Mo films with titanium nitride (TiN) or silicon nitride (SiN) barrier layer - and (ii) to improve the understanding of the influence of (a) various glass substrates containing different …

    nus Repository record for ADVANCED REAR CONTACTS FOR THIN-FILM CIGS SOLAR CELLS ON GLASS SUBSTRATES (opens in a new tab) Download file for ADVANCED REAR CONTACTS FOR THIN-FILM CIGS SOLAR CELLS ON GLASS SUBSTRATES (opens in a new tab)

  7. Light-trapping enhancement in thin film solar cells with photonic crystals

    … back reflector. The DBR consists of alternating layers of SiO2 and Si or Indium Tin Oxide (ITO) and Si to provide high reflectivity with little loss. A layer of two dimensional (2D) photonic crystal slab between the a-Si:H absorber layer and the DBR can diffract light at oblique angles, so that …

    iastate Repository record for Light-trapping enhancement in thin film solar cells with photonic crystals (opens in a new tab)

  8. Characterization Of Microstructural And Chemical Features In Cu-in-ga-se-s-based Thin-film Solar Cells

    … were extensively used for characterizing the absorber layer and interfaces both above and below the absorber layer. Energy-filtered transmission electron microscopy (EFTEM) was applied in cases where EDS results were inconclusive due to the overlap of X-ray energies of certain elements, …

    ucf Repository record for Characterization Of Microstructural And Chemical Features In Cu-in-ga-se-s-based Thin-film Solar Cells (opens in a new tab)

  9. ALICIA polycrystalline silicon thin-film solar cells

    … is to form a high-quality crystalline silicon layer on glass by Aluminium Induced Crystallisation (AIC). This is then the template from which to epitaxially grow the solar cell structure by Ion Assisted Deposition (IAD). IAD allows high-rate silicon epitaxy at low temperatures compatible with …

    unsw Repository record for ALICIA polycrystalline silicon thin-film solar cells (opens in a new tab)

  10. Cu2ZnSnS photovoltaics

    … popular PV material for having a direct bandgap absorber layer, a relatively high absorption coefficient, an optical bandgap of 1.5 eV, high abundancy, and nontoxicity. Additionally, CZTS has the potential to reach 28% efficiency according to the Shockley-Queisser limit. This work focuses on …

    gatech Repository record for Cu2ZnSnS photovoltaics (opens in a new tab)

  11. Polycrystalline silicon thin-film solar cells on glass by ion-assisted deposition

    … on aluminium-induced crystallisation (AIC) seed layers (ALICIA solar cells) is investigated. IAD allows epitaxial growth at high rate, and being based on evaporation, is of low cost (high source material usage, no toxic gases involved). High-quality epitaxy on (100)-oriented Si wafer substrates …

    unsw Repository record for Polycrystalline silicon thin-film solar cells on glass by ion-assisted deposition (opens in a new tab)

  12. Cu2ZnSnS4 thin films solar cells: material and device characterization

    … were characterized both as isolated films and as absorber layer in solar cells, produced using the typical structure Mo/CZTS/CdS/i:Zno/AZO. Both growth processes were found to give good quality kesterite films, showing CZTS as the main phase, large grains and suitable properties for PV …

    trento Repository record for Cu2ZnSnS4 thin films solar cells: material and device characterization (opens in a new tab)

  13. Thin Film Solar Cells on Transparent Plastic Foils

    … with plastic substrates, different silicon layers are optimized at the low processing temperature of 135 C. In the first part of the optimization process, the structural, electronic, and optical properties of boron- and phosphorous-doped, hydrogenated nanocrystalline silicon (nc-Si:H) thin …

    waterloo Repository record for Thin Film Solar Cells on Transparent Plastic Foils (opens in a new tab)

  14. Colloidal Monolayers for Concentration Light in Ultra-Thin Semiconductor Layers

    … film semiconductors are used as photoconductive absorber layers for the development of broadband terahertz generation. Using a femtosecond laser pulse, the generation of a transient increase in the conductivity occurs by photoexciting conduction band electrons in the semiconductor. These …

    arkansas Repository record for Colloidal Monolayers for Concentration Light in Ultra-Thin Semiconductor Layers (opens in a new tab)

  15. Processing And Characterization Of CIGS - Based Solar Cells

    … the performance of these devices. The CIGS absorber layer was fabricated in a 2 stage process. In this process the metal precursors were deposited at 275oC followed by a high temperature selenization step. The advantage of the 2 stage process is that it is manufacturing friendly. The first …

    usf Repository record for Processing And Characterization Of CIGS - Based Solar Cells (opens in a new tab)

  16. Structural trends in off-stoichiometric kesterite type compound Cu2ZnSnSe4 semiconductor

    … Cu2ZnSnSe4 is a promising low cost alternative absorber material for thin film solar cells. The current record conversion efficiency of 12.6% [1] for a Cu2ZnSn(S,Se)4 based thin film solar cell was reached when the polycrystalline CZTSSe absorber layer exhibits an off-stoichiometric composition. …

    fu-berlin Repository record for Structural trends in off-stoichiometric kesterite type compound Cu2ZnSnSe4 semiconductor (opens in a new tab)

  17. Semiconductor colloidal quantum dots for photovoltaic applications

    … and charge extraction profile of the bilayer device, the absorber layer has a charge extraction dead zone which is beyond the reach of the built-in electric field. Therefore, strategies to create a QD bulk heterojunction were considered to address this issue by distributing the junction …

    oxford Repository record for Semiconductor colloidal quantum dots for photovoltaic applications (opens in a new tab)

  18. The Effect of Copper on the Defect Structure of Cadmium Telluride Thin-Film Solar Cells

    … the amount of copper that diffused into the CdTe layer from the Cu:ZnTe interfacial layer at the back of the device. Comparison of devices with varying amounts of copper in the CdTe layer revealed that the 0.9eV defect seen in TPC was associated with the presence of copper in the absorber layer. …

    oregon Repository record for The Effect of Copper on the Defect Structure of Cadmium Telluride Thin-Film Solar Cells (opens in a new tab)

  19. CuInSe₂ nanowires and earth-abundant nanocrystals for low-cost photovoltaics

    … methods under ambient conditions to form the absorber layer in low-cost solar cells. Efficiencies of ~3% have been achieved with CIGS nanocrystal PVs, but this must be improved substantially for commercialization. These devices suffer from poor charge transport in the nanocrystal layer. Here, …

    texas Repository record for CuInSe₂ nanowires and earth-abundant nanocrystals for low-cost photovoltaics (opens in a new tab)

  20. Preparation Of Efficient Cuin1-xgaxse2-ysy/cds Thin-film Solar Cells By Optimizing The Molybdenum Back Contact And Using Diethylselenide as Selenium Precursor

    … were prepared by optimizing the Mo back contact layer and optimizing the parameters for preparing CIGSS absorber layer using diethylselenide as selenium source. The Mo film was sputter deposited on 2.5 cm x 10 cm soda-lime glass using DC magnetron sputtering for studying the adhesion and chemical …

    ucf Repository record for Preparation Of Efficient Cuin1-xgaxse2-ysy/cds Thin-film Solar Cells By Optimizing The Molybdenum Back Contact And Using Diethylselenide as Selenium Precursor (opens in a new tab)

Page 1 of 8