Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 19 of 19 for “"ac-dc Power Conversion"”.

  1. AC/DC power conversion schemes with unity power factor and minimum harmonic distortion

    In most line-interfaced power converter applications the ac mains voltage is first rectified into a dc voltage or current, which is subsequently converted into voltages and currents of appropriate amplitude, frequency and shape to meet the load requirements. The front-end rectifier must satisfy …

    concordia Download PDF for AC/DC power conversion schemes with unity power factor and minimum harmonic distortion (opens in a new tab)

  2. Bidirectional Three-Phase AC-DC Power Conversion Using DC-DC Converters and a Three-Phase Unfolder

    … and discharge rates. Battery voltage is in dc, while the distribution of electricity is still predominantly in ac. To effectively harness the battery energy, a dc-ac inverter is required. A conventional inverter contains two high-frequency switching stages. The battery-interfacing stage …

    utahstate Repository record for Bidirectional Three-Phase AC-DC Power Conversion Using DC-DC Converters and a Three-Phase Unfolder (opens in a new tab)

  3. Toward high-efficiency high power density single-phase DC-AC and AC-DC power conversion - architecture, topology and control

    Power conversion between the single-phase AC grid and DC sources or loads plays an indispensable role in modern electrical energy system for both generation and consumption. The renewable resources and electrical energy storage are integrated to the grid through inverters. Telecoms, data centers …

    uiuc Repository record for Toward high-efficiency high power density single-phase DC-AC and AC-DC power conversion - architecture, topology and control (opens in a new tab)

  4. Bi-directional Current-fed Medium Frequency Transformer Isolated AC-DC Converter

    The use of high power converters has increased tremendously. Increased demand for transportation, housing and industrial needs means that more number of power converters interact with the utility power grid. These converters are non-linear and they draw harmonic currents, significantly affecting …

    tamu Repository record for Bi-directional Current-fed Medium Frequency Transformer Isolated AC-DC Converter (opens in a new tab)

  5. Improving the Light Load Performance of Power Factor Correction Converters Using a Digital Controller

    AC-DC power conversion is the first power stage for all offline electronic devices. To maximize AC power transformer utilization, the power factor of AC-DC converters must be improved. The method that AC-DC converters use to improve the power factor is known as Power Factor Correction (PFC). This …

    queens Repository record for Improving the Light Load Performance of Power Factor Correction Converters Using a Digital Controller (opens in a new tab)

  6. Topology, Control, and Design of LLC Resonant Converters

    Data centers and supercomputers have become the backbone to support today’s scientific researches, economic developments, and individual lives. The power consumption of data centers and supercomputers are enormously high, bringing the urgency of improving energy efficiency of the power conversion …

    queens Repository record for Topology, Control, and Design of LLC Resonant Converters (opens in a new tab)

  7. DESIGN AND CONTROL OF HIGH-PERFORMANCE WIDE-OPERATING-RANGE POWER CONVERTERS

    … to expand, the demand for high-efficiency, high-power-density power converters capable of operating across wide voltage and power ranges has become increasingly critical. This thesis addresses these requirements by developing converter architectures, control strategies, and design methodologies …

    cornell Repository record for DESIGN AND CONTROL OF HIGH-PERFORMANCE WIDE-OPERATING-RANGE POWER CONVERTERS (opens in a new tab)

  8. Miniaturized Power Electronic Interfaces for Ultra-compact Electromechanical Systems

    Advanced and ultra-compact electromechanical (EM) systems, such as kinetic energy harvesting and microrobotic systems are deemed as enabling solutions to provide efficient energy conversion. One of the most critical challenges in such systems is to develop tiny power electronic interfaces (PEIs) …

    maryland Repository record for Miniaturized Power Electronic Interfaces for Ultra-compact Electromechanical Systems (opens in a new tab)

  9. A new bidirectional AC-DC converter using matrix converter and Z-source converter topologies

    … thesis proposes a new bidirectional three-phase AC-DC power converter using matrix converter and Z-source inverter topologies. Advantages of the AC-DC matrix converter are the inherently controllable power factor, the tight DC voltage regulation, the wide bandwidth with quick response to load …

    unsw Repository record for A new bidirectional AC-DC converter using matrix converter and Z-source converter topologies (opens in a new tab)

  10. Single-Sensor DCM PFC Based Onboard Chargers for Low Voltage Electric Vehicles

    … vehicles (EVs) are broadly categorized into low power EVs (48/72 V battery) and high power EVs (450/650 V battery). Low power EVs comprise two-wheelers, three-wheelers (rickshaws), golf carts, intra-logistics equipment and short-range EVs whereas high power EVs consist of passenger cars, trucks …

    concordia Download PDF for Single-Sensor DCM PFC Based Onboard Chargers for Low Voltage Electric Vehicles (opens in a new tab)

  11. Analysis and Design of Discontinuous Conduction Mode AC-DC Power Factor Correction Converters

    … constant voltage variable frequency (CVVF) AC supply bus. In addition, the MEA has adopted high voltage DC bus in its power system to cater the various categories of load used by aircraft. Therefore, the MEA requires AC-DC power converters to convert CVVF AC to constant DC. Existing …

    concordia Download PDF for Analysis and Design of Discontinuous Conduction Mode AC-DC Power Factor Correction Converters (opens in a new tab)

  12. Phase advance modulation of low-cost power electronic converters for SPM wind turbine generators.

    … research investigates the control of low-cost power electronic converters for small-scale wind turbines under standalone applications. The system utilizes a surface permanent magnet (SPM) generator operating with a semi-bridge switched-mode rectifier (SMR) into a DC voltage load. Conventional …

    adelaide Repository record for Phase advance modulation of low-cost power electronic converters for SPM wind turbine generators. (opens in a new tab)

  13. Modular Multilevel Converters with Integrated Energy Storage

    … (BES) integration into the grid is typically achieved using a 2- or 3- level dc/ac converter with BES interfaced directly to the inverter’s dc link or through a dc/dc converter. In both cases, long series connected strings of batteries are required to efficiently maintain the necessary dc link …

    toronto-retro Repository record for Modular Multilevel Converters with Integrated Energy Storage (opens in a new tab)

  14. MICRO-CIRCUIT DIODE FOR ULTRA-LOW-POWER ENERGY HARVESTING

    Harvesting energy from ultra-low-power vibration energy sources typically employs a rectifier circuit as the first power conditioning stage. The Schottky diode has a 0.15 V - 0.2 V threshold voltage and can not extract energy efficiently at low voltage. Other technologies such as MOSFET bridge or …

    siu-theses Repository record for MICRO-CIRCUIT DIODE FOR ULTRA-LOW-POWER ENERGY HARVESTING (opens in a new tab)

  15. Photovoltaic Source Simulators for Solar Power Conditioning Systems: Design Optimization, Modeling, and Control

    … for the dynamic performance evaluation of solar power conditioning systems and their maximum power point tracking algorithms. A well-designed PV source simulator should accurately emulate the static and the dynamic characteristic of actual PV generator. Four major design features should be …

    vt Repository record for Photovoltaic Source Simulators for Solar Power Conditioning Systems: Design Optimization, Modeling, and Control (opens in a new tab)

  16. Three-Phase Single-Stage Isolated AC–DC Converters for Electric Vehicle Battery Charging

    … validates two three-phase single-stage isolated ac–dc converters for electric vehicle battery charging. Both converters integrate input-current shaping, high-frequency isolation, and constant-current/constant-voltage (CC/CV) output regulation within a single power-conversion stage. The first …

    queens Repository record for Three-Phase Single-Stage Isolated AC–DC Converters for Electric Vehicle Battery Charging (opens in a new tab)

  17. Enhanced instantaneous power theory for control of grid connected voltage sourced converters under unbalanced conditions

    … especially designed to control the instantaneous power in voltage sourced converters operating under unbalanced conditions, including positive, negative and zero sequence content. A transformation technique, labelled mno transformation, was developed to enable the decomposition of the total …

    manitoba Repository record for Enhanced instantaneous power theory for control of grid connected voltage sourced converters under unbalanced conditions (opens in a new tab)

  18. Design and Evaluation of an Open-Source AC/DC Power Converter for Microgrid Applications

    … and evaluation of an open-source bidirectional power conversion platform intended for microgrid applications. As distributed energy resources, battery storage systems, and hybrid AC/DC architectures continue to increase in adoption, there is a growing demand for flexible, low-cost, and …

    calpoly Repository record for Design and Evaluation of an Open-Source AC/DC Power Converter for Microgrid Applications (opens in a new tab)

  19. An integrated generator-rectifier system for high-power AC-DC conversion

    High power ac-dc conversion plays an increasingly important role in energy conversion systems, such as wind turbines or electric ship grids. Conventional conversion architectures rely heavily on active rectifiers, which consist of fully-controlled power-electronics switches. These make the system …

    uiuc Repository record for An integrated generator-rectifier system for high-power AC-DC conversion (opens in a new tab)