Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 66 for “"accelerated stress"”.
-
Usage of Highly Accelerated Stress Test (HAST) in Solar Module Ageing Procedures
In this thesis the correlation between two accelerated ageing methods are established. The concept is to carry out the Damp Heat test and the Highly Accelerated Stress Test in order to accelerate the time of testing for solar module production. The choice of materials fell on four types of mini …
-
Electrode specific measurements in a proton exchange membrane water electrolysis cell under accelerated stress testing conditions
Among potentially greener energy alternatives, hydrogen produced by water electrolysis has been shown to be a scalable and transportable energy carrier. Electrolysis systems will require improvements in efficiency and lifetime to be as economical as carbon-fueled production methods. The present …
-
Electrocatalysts for voltage reversal tolerant anodes in proton exchange membrane fuel cells and CO2 reduction to formate
… Ir³⁺ in the electrolyte after an ex situ accelerated stress test (AST) in a representative PEMFC anode environment. The ex situ results are compared with reversal times obtained in a single cell PEMFC subjected to anode accelerated stress test (AAST). Generally, catalysts with higher OER …
-
A Study of Degradation Modeling and Lifetime Estimation of Capacitors
The degradation of capacitors under accelerated stress conditions occurs in a monotonic and non-linear fashion. Several efforts have been made to model the degradation behavior of capacitor considering either physics-of-failure models or statistical models and subsequently estimate its reliability …
-
Investigation And Trade Study On Hot Carrier Reliability Of The Phemt For Dc And Rf Performance
… that occurs after a period of operation in an accelerated stress regime— one hour of high drain voltage, low drain current stress. This stress regime and normal operation regime are then modeled through Sentaurus. Output characteristics are shown along with stress mechanisms within the device. …
-
Hollow Nanoparticles for Low Cost, High Activity and Durability for the Oxygen Reduction Reaction for Fuel Cell Applications
… faster than the structural defects during the accelerated stress tests.
-
Probing the influence of relative humidity and temperature on the sulfonated silica ceramic carbon electrode for PEM fuel cell operation
… SS-CCE catalyst showed better stability after an accelerated stress test.
-
Why the survivability onion should include Reliability, Availability, and Maintainability (RAM)
… presented, to include physics of failure, highly accelerated life testing/highly accelerated stress screening, preventative maintenance determination and pit stop engineering. This analysis uses an Active Protection System (APS) to show that, when RAM is included in the Survivability Onion; both …
-
Understanding Therapeutic Monoclonal Antibody Aggregation Mechanisms through Biophysical, Biochemical and Biological Characterization of Two Types of Immunoglobulin G Dimers
… storage, and following exposure to certain accelerated stress conditions. It has been hypothesized that these dimeric species could be the initial step on the mAb protein aggregation pathway, but this has been difficult to establish since mAb dimers can be a heterogeneous population of …
-
Development and Characterization of Size-controlled Non-spherical Platinum Nanoparticles as Catalyst for Proton Exchange Membrane Fuel Cells
… operational conditions. The 30,000 cycles of accelerated stress test on the membrane electrode assembly prepared by larger Pt nanoparticles (5nm) demonstrates 13% drop at maximum power density, illustrating the excellent performance against degradation (ageing).
-
Development of Ex-situ Accelerated Chemical Stress Test Protocol for Common Anionic Exchange Membrane Chemistries
… work focuses on the development of an ex-situ accelerated stress test (AST) protocol for AEMs that assesses the chemical durability. Hydroxide and radical attack were the dominant chemical degradation pathways identified in literature for AEMs. Furthermore, Hofmann elimination and nucleophilic …
-
From Field to Failure: Detecting and Understanding Reliability Defects in Crystalline Silicon Photovoltaics
… studies of long-term outdoor exposure and accelerated stress testing provide the samples, but a comprehensive characterization suite is necessary for impactful results. The state of the art for characterization is highly valuable yet incomplete. This work presents a multiscale, …
-
Development of Tin Oxide As An Oxidation-Resistant Support For Pem Fuel Cells
… with the Pt/SnO2 catalyst were measured under accelerated stress tests proposed by U.S. Department of Energy. The corrosion resistance of the catalyst support was investigated by holding the cell potential at 1.2 V for 200 h. The potential sweeping method (0.7-1.2 V) was applied to the …
-
Investigating Chemical Degradation of PEMs in Water Electrolysis Leading to H₂/O₂ Explosive Mixtures
… a series of controlled experiments employing an accelerated stress testing method to simulate the impact of chemical exposure on PEMs were carried out. The membrane's structural changes, chemical composition, and performance metrics were analyzed using spectroscopic and microscopy techniques. …
-
Investigation of the Chemical and Physical Impact of No-Clean Flux Residue on Board-Level Underfill Performance
… migration of metal salts was induced with Highly Accelerated Stress Test (HAST) treatment and confirmed by X-ray Photoelectron Spectroscopy (XPS), where copper diffuses more than tin. These results highlight the critical effect of flux chemistry in interfacial reliability and provide suggestions …
-
GPU-Accelerated Boundary Element Method for Stress Analysis of Underground Excavations
Stress analysis is one of the most important processes in designing an underground excavation. With the usage of numerical methods on a computer, such as the Boundary Element Method (BEM), the process of stress analysis can be made accurate. However, the computational implementation of stress …
-
Preparation, characterisation and application of single and multilayer mixed-matrix membranes
… under 10 mA cm-2 for over a week at 100°C during accelerated stress tests (AST). However, some challenges in producing multilayer membranes pertained due to frequent interruption of the interfaces of the separate layers, which was further emphasised when fabricating thinner membranes. The …
-
The Effect of Package Geometry on Moisture Driven Degradation of Polymer Aluminum Capacitors
… capacitors in high humidity conditions. Highly accelerated stress testing (or HAST) (110ºC, 85% relative humidity) of polymer aluminum capacitors in which the parts were subjected to unbiased HAST conditions for 700 hours was done to understand the design factors that contribute to the …
-
Engineered carbon materials as advanced catalyst supports for fuel cell applications
… performance of a commercial Pt/C benchmark after accelerated stress testing (AST) for carbon support corrosion.<br><br>In the second part, mesoporous N-doped carbon (MPNC) nanospheres with precisely defined pore sizes (10 nm and 28 nm) and particle diameters exceeding 100 nm were developed to …
Page 1 of 4