Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 12 of 12 for “"acceleration amplification"”.
-
Approximating the Seismic Amplification Effects Experienced by Solar Towers Mounted on the Rooftops of Low-Rise Industrial Buildings
This thesis investigates the acceleration amplification experienced by solar towers mounted on the rooftops of low-rise industrial buildings during a seismic event. Specifically, this thesis looks to assess the validity of using amplification factors adopted by the ASCE 7-05Minimum Design Loads for …
-
Experimental Seismic Evaluation of Ceiling-Piping-Partition Nonstructural Systems
… two configurations, one to produce large floor accelerations and the other to produce large inter-story drifts, affecting both acceleration and drift sensitive nonstructural systems. The responses and behaviors of ceiling-piping-partition systems were critically assessed through several design …
-
Analysis of dynamic testing performed on structural clay tile infilled frames
… frame and panel load- deflection behavior, acceleration amplification, and frequency degradation characteristics.</p> <p>The out-of-plane tests resulted in little degradation of frequency which means there was little loss of stiffness. There was no evidence of the infill "walking-out" of the …
-
Seismic response of acceleration-sensitive non-structural components mounted on irregular multi-storey reinforced concrete buildings
… the seismic responses of lightweight acceleration-sensitive non-structural components (NSCs) integrated on irregular multi-storey reinforced concrete (RC) structures designed on different ground types. Dynamic nonlinear finite element analyses of the primary-secondary systems were …
-
Assessment of Floor Accelerations in Yielding Buildings
… of 21 ground motions. To better understand the acceleration demands on nonstructural components, this study focuses on the influence of structural period, level of ductility of the structure, and relative height in the building on the horizontal and vertical floor acceleration response. The …
-
Kealakaha Stream Bridge Replacement Project: seismic instrumentation plan.
… types of information that can be obtained from acceleration data and what methods were used to process the data. The proposed seismic instrumentation plan consists of 41 seismic accelerometers, 4 relative displacement sensors and three data recording units. All instruments and recorders are …
-
Shaking table model tests of reinforced concrete tunnels under multiple earthquake shakings
… identification. Except for the measurement of acceleration and bending strain, a new cracking monitoring system equipped with wireless mini-cameras was proposed to detect the evolution of tunnel damages during the tests, while Light Detection and Ranging (LiDAR) technology was utilized to …
-
Seismic Site Response of Partially Saturated Soil Layers
… led to higher surface-to-base motion intensity amplification than dry conditions; especially in low period ranges. On average, the amplification of peak ground acceleration was inversely proportional to degree of saturation at surface, demonstrating higher amplifications at lower degrees of …
-
Experimental investigation of the behavior of mixtures with granular soil and low weight materials
… ground motions to evaluate the dynamic response, acceleration amplification, and deformation characteristics of the composite material. The shake table results confirm that the inclusion of granulated rubber leads to a reduction in peak acceleration transmission and an increase in damping at the …
-
Effect of Torsional Ground Motion Component on Floor Acceleration Response in Flexible SMRF Buildings
… of the ground motions (TGM) on the floor acceleration response of flexible special moment resisting frame (SMRF) buildings. For this purpose, computational models of three SMRF buildings were subjected to far-field ground motions with and without TGMs. Accordingly, the effect of TGM on the …
-
Fundamental Dynamics and Performance Assessment of Three-Dimensional Seismic Isolation
… ratio, vertical and horizontal displacement and acceleration amplification factors. A parametric study is carried out to evaluate the effect of different site conditions, building aspect ratio and 3D isolation parameters on the structure and bearing response. The results show that effective 3D …
-
Identification of structural damage, ground motion response, and the benefits of dense seismic instrumentation
… a nonlinear finite element model and simulated acceleration data. Fiber elements and a bilinear material model are used in order to account for the change of local stiffness when cracks at the welds are subjected to tension and the model parameters characterize the loss of stiffness as the crack …