Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 29 for “"acceleration measurement"”.
-
Reliable, Real-Time Acceleration Measurement Toward Automated Monitoring of Driver Behavior
… driver behavior. Data were collected on sixteen acceleration/deceleration profiles using accelerometers, GPS, and dashboard velocity. The resulting acceleration waveforms were filtered with an adaptive filtering algorithm and compared. Differences between hard and soft acceleration profiles are …
-
Design and Implementation of a Pivot Shift Prototype for Quantitative Analysis
… gyroscopes to provide force, orientation, and acceleration measurement. The prototype has been used to quantify the results of a medical test called pivot shift which tests the dynamic stability of the patients knee. With the initial prototype built, limited clinical trials were conducted. Two …
-
Integration of control algorithms for quadrotor UAV's using an indoor sensor environment
… that minimizes the covariance of position and acceleration measurement inputs to produce a smooth estimation of states (position, velocity and acceleration). These estimated states are then fed into a modified PD plus Integral controller to produce quadrotor thrust commands for given altitude …
-
Building Drift Estimation Using Acceleration and Strain Measurements
… displacements either using direct or indirect measurements. One of the common indirect measurements widely used is the acceleration measurement, due to its lower cost and simple instrument attachment to the structures, and it does not require a fixed reference point as most of direct …
-
Sensor fusion to detect scale and direction of gravity in monocular SLAM systems
… practical option. Because accelerometers measure acceleration and gravity, an inertial measurement unit (IMU) must filter out gravity and track orientation with complex algorithms in order to provide a linear acceleration measurement that can be used to recover SLAM scale. In this thesis, an …
-
Physical understanding of tire transient handling behavior
… of tire lateral force and aligning torque. Using acceleration measurement on the tire inner liner it was observed that the contact patch shape of the rolling tire changes nonlinearly with slip angle and becomes asymmetric. Optical measurement outside and inside the tire has clarified that carcass …
-
Seismocardiography: Practical implementation and feasibility
… of SCG signals were studied. Two different SCG measurement systems were implemented and their performance was evaluated. The present implementations featured improved acceleration measurement sensitivity and a multimodal approach to the detection of SCG and auxiliary physiological signals. Also, …
-
Mathematical Equations and System Identification Models for a Portable Pneumatic Bladder System Designed to Reduce Human Exposure to Whole Body Shock and Vibration
… experiments. Numerous excitation and response acceleration measurement records were collected and used to prove the agreement with predictions. The estimation of two selected models were later applied to standard metrics in the frequency domain realization and compared with measurement …
-
Study of hypersonic aerodynamics using free flight experiments
… numerically and validated with force balance measurements on fixed, sting-mounted models in wind tunnels. However, the results can be challenging to resolve and are unavoidably compromised by sting interference. This thesis describes experimental studies conducted using the University of …
-
Quantifications and characteristics of dynamic soft tissue artifacts captured by wearable inertial measurement unit sensors
Inertial measurement units (IMUs) are a prevalent component in wearable sensor systems to study motion in unconstrained environments by measuring both linear acceleration and angular velocity at a point of interest on the human body. However, wearable sensors are often worn on soft tissue that is …
-
Distributed biodynamic characteristics of the human hand-arm system coupled with vibrating handles and power tools
… biodynamic responses above 500 Hz were due to acceleration measurement location, handle dynamics (handle resonant frequency and deformation) and ineffectiveness of handle inertia correction. The peaks and valleys in the DPMI magnitude correspond to resonant frequencies of the tissues/muscles …
-
Residual test mass acceleration in LISA Pathfinder: in-depth statistical analysis and physical sources
… trajectories, complying with the residual acceleration requirements of the future gravitational-wave observatory LISA. After operations, the LPF Collaboration pointed out that two phenomena, affecting the sub-mHz performance, were not completely understood and needed deeper analyses. This, …
-
Utilization of simulated GRACE inter-satellite range-accelerations to estimate Earth's gravity field
… benefit from utilizing instead the range-acceleration pseudo-observations, which should be sensitive to more spatially-localized mass variations in the signal, thereby reducing the N-S errors in the gravity field and facilitating more precise estimation to higher degrees. Most solutions …
-
THE DESIGN AND IMPLEMENTATION OF A SYSTEM FOR MACHINE MONITORING
… of the VA sensor was 1kHz with an amplitude of acceleration within the ±16g range. The resolution of the acceleration measurement was 3.9mg which was 0.02% of the established 20g measuring range. The conditions of the motors were determined by programming which was precise to 3dp. The …
-
Advanced Sensing and Optimal Estimation for Multi-scale Civil Infrastructure Health Monitoring
… in monitoring the health of structures using measurements and algorithms to convert the measurements into actionable information. Specifically, techniques based on displacement (state) and strain have attracted significant attention for global damage assessment and localized damage (e.g., …
-
High-Order Robotic Joint Sensing with Multiple Accelerometer and Gyroscope Systems
… order joint space derivative terms such as acceleration and jerk being introduced into the control systems and estimators. Although it is evident that the inclusion of these terms can increase the performance of the estimators and control systems, there is a distinct lack of high quality …
-
Broad Frequency Bandwidth Self-powered Vibration Sensor Based on Electret Materials
… sensors with a broad frequency range for less measurement distortion of vibration and to characterize and elucidate their working principles. The main contributions of this thesis are: 1. An efficient and precise characterization method has been developed to characterise the frequency responses …
-
Microstructure characterization of foamed cement and concrete
… consolidating effect was characterized based on acceleration measurement in the fresh mixtures during vibration and the hardened air-void parameters prescribed by ASTM C457 were also estimated using an automated flatbed scanner method. There was no significant change in the spacing factors of the …
-
Intelligent Flight Control Systems Using Adaptive Deep Neural Networks and Concurrent Learning-Based Design Methods
… development formally incorporating realistic measurement errors in the recorded data stack; a Lyapunov-based stability analysis deriving a sufficient condition on the diversity of the recorded data stack under which the tracking error and DNN weight estimation error are proven to be uniformly …
-
A study of force-motion and vibration transmission properties of seated body under vertical vibration and effects of sitting posture
… An adjustable head-strap comprising a three-axes acceleration measurement system was developed to measure the vibration transmitted to the seated subjects' head. These experiments were performed with 12 adult male subjects and the data were analyzed to derive the biodynamic responses in terms of …
Page 1 of 2