Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 2422 for “"activation energy"”.
-
Methods of activation energy calculation for portland cement
… of reaction rate. The Arrhenius equation uses activation energy (Eₐ) to define the sensitivity of a particular reaction to temperature. For portland cement, this constant is computed using either isothermal calorimeter data or mortar cube compressive strength. There is a large disparity in …
-
CONCRETE SHRINKAGE PREDICTION USING MATURITY AND ACTIVATION ENERGY
… This study sought to find a correlation between activation energy based concrete maturity and concrete shrinkage. A single concrete mixture was tested to determine the apparent activation energy of the mixture and the shrinkage under varying environmental conditions. A shrinkage model …
-
Effect of Cement Chemistry and Properties on Activation Energy
… of cement chemistry and physical properties on activation energy. Research efforts indicated that time dependent concrete properties such as strength, heat evolution, and thermal cracking are predictable through the concept of activation energy. Equivalent age concept, which uses the activation …
-
A mechanistic study of stress corrosion cracking utilizing activation energy
Master of Science (M.S.)
-
Activation energy of Douglas fir char gasification by carbon dioxide
The activation energy of Douglas fir wood char gasified in carbon dioxide was determined. Activation energies were found for chars that had been pyrolyzed in nitrogen at 600, 750, and 900°C. A thermogravimetric analyzer provided the weight versus temperature data used to obtain the activation …
-
Eyring Activation Energy Analysis of Acetic Anhydride Hydrolysis in Acetonitrile Cosolvent Systems
… considered a standard reaction for investigating activation energy parameters using cosolvents. Hydrolysis in water/acetonitrile cosolvent is monitored by measuring pH vs. time at temperatures from 15.0 to 40.0 °C and mole fraction of water from 1 to 0.750. This work utilizes a temperature …
-
The symmetry and thermal activation energy of the EL2 defect center in gallium arsenide
The symmetry and thermal activation energy of a dominant defect center in n-type liquid encapsulated Czochralski grown gallium arsenide (GaAs) crystal, called EL2, is investigated experimentally by the deep level transient spectroscopy (DLTS) and uniaxial stress techniques. A brief presentation of …
-
The Intrinsic Activation Energy as a Guide to Mechanisms of Reactions on Solid Surface
Through the Polanyi Relationship, the intrinsic activation energies calculated from gas phase reactions have been shown to provide practical information about the kinetics and mechanisms of surface reactions. Ab initio calculations showed that reaction pathways which involve C-C or C-O bond …
-
Controlling Activation Energy to Wafers and Walls in Plasma Processing Reactors for Microelectronics Fabrication
Wafer-to-wafer reproducibility during plasma etching presents another challenge. The use of low-pressure, high-density discharges results in increasing buildup of etch products in the plasma reactor resulting in increased interactions of etch products with wafer and non-wafer surfaces, alike. …
-
A Direct Determination of the Activation Energy for the Reaction of Nitric Oxide With Ozone
A conventional Arrhenius fit to the data is
-
A mathematical model for the pyrolysis of oil shale using distribution of activation energy kinetics
Thesis (M.S.)--Michigan State University. Department of Chemical Engineering, 1980
-
Kinetics and Activation Energy Parameters for Hydrolysis of Acetic Anhydride in a Water-Acetone Cosolvent System
… performed under isomole fraction conditions and activation enthalpy, entropy, and Gibbs free energy for hydrolysis of acetic anhydride have been determined. The isomole fraction Eyring plots are linear, because, activation enthalpy and entropy are independent of temperature under these …
-
The influence of temperature and composition on the activation energy for creep in binary aluminum lithium alloys
… temperature and composition dependence on the activation energy for creep of A1-0.5wt.pct.lithium, A1-1.Owt.pct.Li, and A1-2. Owt.pc+.Li alloys. A series of isothermal tests were conducted utilizing constant true stress creep tests, with nominal temperatures ranging from 300 C to 500 C. …
-
Determination of Low Density Polyethylene Water Permeability, Transport Activation Energy, and Mechanical Properties after Thermal Oxidation and Immersion in Water
Low Density Polyethylene (LDPE) thin film was exposed to oxygen gas overpressure and water. in a Parr Instruments pressure vessel at four temperatures 22, 50, 70 and 80°C; and, at 30 and 50 psi initial oxygen pressures. Sheet polypropylene (PP) and high-density polyethylene (HDPE) as well as …
-
Photosynthetic Water Oxidation in Plants and Cyanobacteria - Activation Energy of the O-O Bond Formation Step and Substrate Analogue NH3
… dependence of PSII reactions revealed that, the activation enthalpy of O-O bond formation was significantly decreased in the presence of (30%) glycerol. In addition, the activation energy of O-O bond formation was compared among four PSII variants. A phenomenon of enthalpy-entropy compensation …
Page 1 of 122