Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 27 for “"actuator disc"”.
-
Use of actuator disc model for modelling axial compressor dynamics
… are used to represent compressor dynamics. The actuator disc model (ADM) is one of these. It gives the possibility to calculate the pressure rise between the areas upstream and downstream of the blading in the compressor as a function of the axial velocity.<br/>The first question addressed in …
-
Computational Modelling Of Wind Turbine Wakes Using an Actuator Disc Coupled With Reynolds Averaged Navier-Stokes Models
… several models have been implemented in CFD. The actuator disc model (ADM) is considered the simplest model. It treats the rotor as an actuator disc with a small thickness. Other computational models are the actuator line model (ALM) and a fully resolved turbine geometry. The main objectives of …
-
An investigation of the dynamic stalling characteristics of rotating axial-flow compressor blades
… transfer function was then used in a new semi-actuator disc model to predict the dynamic response of the experimental compressor. The basis of the model is a mathematical representation of the flow fields upstream and downstream of a compressor rotor. The compressor rotor is represented in the …
-
Experimental Investigation of Wind Loading on a Ducted Wind Turbine
… duct (Donqi Urban Windmills) loaded with an actuator disc with 50% porosity was tested in the wind tunnel. Turbulence was generated using a novel multi-grid approach that utilises two passive grids placed at a fixed distance from each other. Testing was done for four different turbulence …
-
Functional design and swimming energetics of the freshwater pufferfish, Tetraodon fluviatilis
… for other aquatic propulsive systems. A modified Actuator-Disc model was employed to estimate propulsive power and efficiency during steady forward swimming based on the morphometric, kinematic and hydromechanical parameters calculated for the pufferfish. Comparisons of the experimental estimates …
-
Computational Fluid Dynamics (CFD) modelling of renewable energy turbine wake interactions
… The models developed took the form of actuator discs with the solution of incompressible Reynolds-Averaged Navier-Stokes equations with the k-ω SST turbulence models. Simulations were initially conducted of a single turbine in water and air and then two axially aligned turbines to study …
-
Extended Momentum Model for Single and Multiple Hydrokinetic Turbines in Subcritical Flows
… proposes equations extending the Free Surface Actuator Disc Theory to yield drag forces and interference factors from a series of two porous discs in open channel flows. The new model includes blockage ratio and Froude number as independent variables, which are inferred in advance to yield a …
-
A computational fluid dynamic method for rotating stall in a single stage axial compressor
… the approach taken is essentially a semi-actuator disc method wherein two of the conservation partial differential equations are replaced by two algebraic constraint equations. Since the Euler equations inherently fail to account for the viscous phenomenon of rotating stall, an unsteady …
-
Gaussian Process Regression applied to Marine Energy Turbulent Source Tuning via Metamodel Machine Learning Optimization
… models typically represent turbines as actuator discs that act as momentum sinks and sources of turbulence. An OpenFOAM model was developed where actuator-disc $k$-$\epsilon$ turbulence was characterized using an approach developed for flows through vegetative canopies. Turbine-wake data …
-
THE EFFECTS OF CURRENT BLOCKAGE ON OFFSHORE STRUCTURES
… of current blockage is formulated based on the actuator disc theory and proposed to represent the actual hydrodynamic drag force more accurately after taking into account the current blockage effects. This thesis tests and verifies the adequacy of the analytical model against series of …
-
Numerical Modelling for Hydrodynamic Impact and Power Assessments of Tidal Current Turbine Arrays
… representation method is proposed to extend the actuator disc concept to 3-D large scale ocean circulation models. Through the reproduction of physical experiments to reasonable accuracy, grid and time dependency tests and an up-scaling exercise, this method has shown its numerical validity as …
-
The Energy Yield Impacts of Wind Farm Design and Location
… on combining established engineering theory. Actuator disc theory used for replicating the far wake of a wind turbine is validated using wind tunnel experiments and computational fluid dynamics simulations. The technique is then combined with a high fidelity full rotor model to produce a novel …
-
Analysis of Hydrokinetic Turbines in Open Channel Flows
… method is then compared to three-dimensional Actuator Disc Model (ADM) developed in commercial Computational Fluid Dynamic (CFD) code ANSYS Fluent. This model uses a porous media to represent HAHT and Reynolds-Average Navier-Stokes (RANS) equations along with Volume of Fluid (VoF) model to …
-
RANS STUDY OF FULLY DEVELOPED WIND TURBINE ARRAY BOUNDARY LAYERS
… array of wind turbines modeled using the Actuator Disc Model (ADM) for various wind-turbine arrangements, turbine loading factors, and surface roughness values for which prior LES results are available for comparison. The results are used to obtain the effective roughness length scales …
-
Enhanced array design for tidal power generation
… replicate this behaviour.</p> <p>Linear Momentum Actuator Disc Theory (LMADT) is employed to develop a new analytical model for a long row array of tidal turbines split into multiple smaller, co- linear row arrays. An argument of separation of scales is used to facilitate this model. It is found …
-
Theoretical limits to tidal stream energy extraction
… of turbine arrays.</p> <p>Linear momentum actuator disc theory is employed to describe the operation of an idealised turbine array partially spanning a wide channel. The model is comprised of two quasi-independent sub-models, an array-scale model, describing flow phenomena around the array, …
-
Unsteady loading on floating horizontal axis tidal turbine
… to be included in a simplified model, such as an actuator disc, for a fully coupled model simulation. Modifications to include the added mass and damping forces into an existing fully coupled model are presented in this thesis. The result shows good improvement from the original model when …
-
Hydrodynamic design of multi-rotor tidal array
<p>This thesis adopts a blade element actuator disc method, embedded in a Reynolds Average Navier-Stokes (RANS) solver, to design multi-rotor tidal arrays. The constructive interference effect is taken into account in the design process to maximize the hydrodynamic efficiency. The design process …
-
Experimental and Numerical Modeling of a Tidal Energy Channeling Structure
… In separate tests, turbines were simulated using Actuator Disc Theory and porous plates. The TAS-plate combination was found to be able to extract up to 4.2 times more power from flow than the stand-alone plate, demonstrating that the TAS could provide turbines with a significant advantage in …
Page 1 of 2