Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 17 of 17 for “"additive layer manufacturing"”.

  1. Investigation of residual stresses in the laser melting of metal powders in additive layer manufacturing

    Laser Melting (LM) is an Additive Layer Manufacturing (ALM) process used to produce three-dimensional parts from metal powders by fusing the material in a layerby- layer manner controlled by a CAD model. During LM, rapid temperature cycles and steep temperature gradients occur in the scanned …

    wlv Repository record for Investigation of residual stresses in the laser melting of metal powders in additive layer manufacturing (opens in a new tab) Download file for Investigation of residual stresses in the laser melting of metal powders in additive layer manufacturing (opens in a new tab)

  2. An integrated process-structure-property-performance modelling framework for additive layer manufacturing of Ti-6Al-4V

    Additive Manufacturing is proving to be a revolutionary manufacturing process that is making itsway into all engineering industries that require high-performance and light-weight structuralcomponents. This is mainly thanks to its ability to manufacture complex shapes that areunobtainable by …

    strathclyde Repository record for An integrated process-structure-property-performance modelling framework for additive layer manufacturing of Ti-6Al-4V (opens in a new tab)

  3. Únavové vlastnosti materiálů vyráběných technikou SLM

    … Laser Melting“), která se řadí mezi metody ALM („Additive Layer Manufacturing“). V první části jsou rozebrány obecné zákonitosti o únavě materiálu a metodě SLM. V druhé části se práce věnuje samotnému vlivu výrobních parametrů na výsledné vlastnosti materiálu. Hlavním cílem práce je zjištění …

    brno-tech Repository record for Únavové vlastnosti materiálů vyráběných technikou SLM (opens in a new tab)

  4. Příčiny vzniku trhlin v objemných vzorcích z hliníkových slitin připravovaných technologií SLM

    … Melting“), a ta náleží do skupiny metod ALM („Additive Layer Manufacturing“). V první části je rozebrán obecný technologický postup metody SLM. V druhé části je věnována pozornost vlivu procesních parametrů na výslednou součást a nevýhody spojené s použitím hliníku u těchto metod. V poslední …

    brno-tech Repository record for Příčiny vzniku trhlin v objemných vzorcích z hliníkových slitin připravovaných technologií SLM (opens in a new tab)

  5. Modelling Novel Heat Exchangers for Aircraft Thermal Management

    … management systems driving this project.Various additive layer manufacturing techniques are compared and the most suitable one for heat exchangers is identified. In addition, current analytical/empirical design methodology of heat exchangers is compared to existing numerical modelling work. In …

    whiterose Download PDF for Modelling Novel Heat Exchangers for Aircraft Thermal Management (opens in a new tab)

  6. An investigation into microstructure and microstructural control of additive layer manufactured Ti-6Al-4V by electron beam melting.

    An additive layer manufacturing (ALM) technique, electron beam melting, has been used for the production of simple geometries, from pre-alloyed Ti-6Al-4V powder. Microstructure, texture and mechanical properties achieved under standard conditions have been investigated, alongside numerical …

    whiterose Download PDF for An investigation into microstructure and microstructural control of additive layer manufactured Ti-6Al-4V by electron beam melting. (opens in a new tab)

  7. Additive Manufacturing of Tungsten via Selective Laser Melting and Electron Beam Melting

    This thesis explores powder bed Additive Layer Manufacturing (ALM) of pure tungsten. Two ALM processes were investigated; Selective Laser Melting (SLM) and Electron Beam Melting (EBM). An optimal experimental design approach was adopted to investigate the effect of process parameters on parts …

    whiterose Download PDF for Additive Manufacturing of Tungsten via Selective Laser Melting and Electron Beam Melting (opens in a new tab)

  8. 3D Printing for Optical Fibre Applications

    … fused deposition modelling (FDM), which is an additive layer manufacturing (3D printing) technique. The research into optimising transparency of the printouts allowed the printing of solid-core and hollow-core preforms of poly(methyl methacrylate) (PMMA) and polycarbonate. The first …

    aston Download PDF for 3D Printing for Optical Fibre Applications (opens in a new tab)

  9. Variation in mechanical behavior due to different build directions of Ti6Al4V fabricated by electron beam additive manufacturing technology

    … steel). It creates a stable and adherent oxide layer on its surface upon exposure to air or water which gives it a great resistance to corrosion and has made it a great choice for structures in severe corrosive environment and sea water. Its non-allergic property has made it suitable for …

    alabama Repository record for Variation in mechanical behavior due to different build directions of Ti6Al4V fabricated by electron beam additive manufacturing technology (opens in a new tab)

  10. Porous Topography Dependence of Mechanical properties and Biological Responses for 3D Printed Stainless Steel and Modified Bioimplant Devices

    … resistance and relatively good biocompatibility. Additive layer manufacturing (ALM) allows the precise manufacture of implant in certain material, and porous structure, usually lattice, is found to be benefit to bone recovery. In this work, selective laser melting (SLM) is used to produce …

    unsw Repository record for Porous Topography Dependence of Mechanical properties and Biological Responses for 3D Printed Stainless Steel and Modified Bioimplant Devices (opens in a new tab)

  11. Mechanical behaviour of structured joints in 3D printed composite components: experimental, analytical and numerical study

    … regarding the fiber-reinforced composite manufacturing have emerged with the advent of 3D printing techniques, which allows complex geometries to be produced. This freedom of design can be skilfully exploited to create more efficient joints and to increase the overall structure …

    sevilla Repository record for Mechanical behaviour of structured joints in 3D printed composite components: experimental, analytical and numerical study (opens in a new tab)

  12. Surface Roughness Effects on Thermally Stressed Aviation Fuel

    … transfer by disrupting the quiescent viscous layer adjacent to the wall and interfering with structures of turbulence further into the boundary layer. Furthermore, a rough surface increases the wall surface area, presenting more active sites for heterogeneous catalytic reactions. Additive …

    whiterose Download PDF for Surface Roughness Effects on Thermally Stressed Aviation Fuel (opens in a new tab)

  13. Development of processing strategies for the additive layer manufacture of aerospace components in Inconel 718.

    Additive Layer Manufacturing, ALM, of metal components has been steadily developed over the past decade. Further work is necessary to understand the metallurgical response of alloys to user defined processing parameters to establish the robustness of individual ALM systems and how the response …

    whiterose Download PDF for Development of processing strategies for the additive layer manufacture of aerospace components in Inconel 718. (opens in a new tab)

  14. Hybrid powder metallurgy processing for high temperature strength Ni-base superalloy Inconel 718

    Additive layer manufacturing (ALM) processes such as powder bed fusion (PBF) provide an opportunity for the manufacture of new more complex designs of Ni-base superalloy components, which have the potential to extend the operating temperatures and efficiencies of gas turbine engines. There are …

    birmingham Download PDF for Hybrid powder metallurgy processing for high temperature strength Ni-base superalloy Inconel 718 (opens in a new tab)

  15. The adoption of laser melting technology for the manufacture of functionally graded cobalt chrome alloy femoral stems

    Total Hip Arthroplasty (THA) is an orthopaedic procedure that is performed to reduce pain and restore the functionality of hip joints that are affected by degenerative diseases. The outcomes of THA are generally good. However, the stress shielding of the periprosthetic femur is a factor that can …

    wlv Repository record for The adoption of laser melting technology for the manufacture of functionally graded cobalt chrome alloy femoral stems (opens in a new tab) Download file for The adoption of laser melting technology for the manufacture of functionally graded cobalt chrome alloy femoral stems (opens in a new tab)

  16. THE USE OF LIFE-CYCLE ANALYSIS TO REDUCE THE ENVIRONMENTAL IMPACT OF MATERIALS IN MANUFACTURING

    … of three life-cycle analysis (LCA) studies of manufacturing to determine cumulative energy demand (CED) and greenhouse gas emissions (GHG). The methods proposed could reduce the environmental impact by reducing the CED in three manufacturing processes. First, industrial symbiosis is proposed …

    mtu Repository record for THE USE OF LIFE-CYCLE ANALYSIS TO REDUCE THE ENVIRONMENTAL IMPACT OF MATERIALS IN MANUFACTURING (opens in a new tab)

  17. Linear friction welding of AD730™ Ni-based superalloy to additively manufactured Inconel 718

    … geometries and high time to market delay. The additive layer manufacturing can reduce drastically the time to market. The focus of this PhD work was to study the suitability of the LFW process to join two superalloys fabricated with two different methods: SLMed Inconel 718 (IN718) superalloy …

    ets-quebec Download PDF for Linear friction welding of AD730™ Ni-based superalloy to additively manufactured Inconel 718 (opens in a new tab)