Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 3531 for “"adhesive"”.

  1. Plywood adhesive development.

    … thesis is primarily a study of two-step plywood adhesives made with varying amounts of phenol, 1, 3, 5 xylenol, resorcin, and formaldehyde. Each resin was evaluated by using it as the adhesive in making plywood. The plywood was then tested for shear strength and wood failure after a four hour …

    louisville Repository record for Plywood adhesive development. (opens in a new tab)

  2. Adhesive Bonding of Low Moisture Hickory Veneer with Soy-based Adhesive

    … engineered wood flooring bonded with soy-flour adhesive are thought to be factors leading to potential performance deficiencies. The goal of this research was to gain a broader understanding of bonding low moisture hickory veneer with soy-based adhesive. Soyad® is of particular interest due to …

    vt Repository record for Adhesive Bonding of Low Moisture Hickory Veneer with Soy-based Adhesive (opens in a new tab)

  3. Optimizing Methods for Separation of Adhesive Tape from Fabrics and Obtaining Latent Prints from Adhesive and Non-Adhesive Sides

    … (manual pulling apart, Un-Du commercial adhesive remover, liquid nitrogen, and a 1:1 xylene-chloroform mix) and processed with WetWop to determine if usable prints can be obtained. Results have demonstrated that the best separation method for the widest range of fabrics and tapes is …

    buff-state Repository record for Optimizing Methods for Separation of Adhesive Tape from Fabrics and Obtaining Latent Prints from Adhesive and Non-Adhesive Sides (opens in a new tab)

  4. Adhesive bonding of aluminium

    Adhesive bonding of aluminium is widely used in the aerospace industry. High initial bood strengths can be obtained, but bond failure occurs atter prolonged exposure to humid enviroments. The thesis contains details ot a test procedure which has been designed and developed for the assessment of …

    aston Download PDF for Adhesive bonding of aluminium (opens in a new tab)

  5. Interpenetrating Polymer Network Adhesive

    … A350 have featured an increased use of thermoset adhesive bonded primary structure assemblies. In addition to carbon fiber laminates and fiber metal laminates like GLARE and TiGr, one potential growth area is selective fiber reinforcement of metallic structures. The thermal expansion differential …

    washington Repository record for Interpenetrating Polymer Network Adhesive (opens in a new tab)

  6. Adhesive formulations for lens applications

    … on the development of a novel polyurethane adhesive which could be used in the construction of sunglass lens. This adhesive must satisfy certain objectives: (i) the cured adhesive must be optically clear with the final haze value < 1.5% when laminated between two layers of plastic, (ii) the …

    strathclyde Repository record for Adhesive formulations for lens applications (opens in a new tab)

  7. Adhesive bonding between dissimilar materials

    … of Technology. This thesis is an evaluation of adhesive bonds between composite to composite, and composite to metal in different environments. The different environments are simulated only by temperature variations to represent environmental conditions of land, sea and air. The evaluation is …

    chalmers Repository record for Adhesive bonding between dissimilar materials (opens in a new tab)

  8. Nanocharacterization of Composite Adhesive Bonding Systems

    … Nanocharacterization of Composite Adhesive Bonding Systems Rita Jeannine Taitano Johnson Olander Chair of the Supervisory Committee: Brian D. Flinn Department of Materials Science and Engineering This research was directed toward understanding the fundamental science behind polymer …

    washington Repository record for Nanocharacterization of Composite Adhesive Bonding Systems (opens in a new tab)

  9. Controversies in adhesive dentistry - an overview /

    … study is to investigate and assess the different adhesive systems and their chemical and mechanical properties on the tooth surface in order to preserve as much tooth structure as possible. Adhesive techniques and their efficiency were analyzed. Objectives: 1. To evaluate the technical necessity …

    vilnius Repository record for Controversies in adhesive dentistry - an overview / (opens in a new tab)

  10. Adhesive Qualities of Different Dental Cements

    Orthodontic bands were cemented to extracted teeth with four types of dental cement. The force values required to dislodge the bands after storage in water for 24 hours were recorded and a comparison of the cements was made. The amount of residual cement remaining on the enamel surface and the band …

    iupui Repository record for Adhesive Qualities of Different Dental Cements (opens in a new tab)

  11. Structural adhesive bonding for marine applications

    In this present study, four cold curing adhesives, namely, F241, Redux 420, Araldite 2013 and XD 4416 were evaluated for bonding steel tapered double cantilever beams (TDCB) specimens. Fracture toughness of the adhesives were compared and evaluated at temperature range of -40 °C to 60 °C. From the …

    glasgow Repository record for Structural adhesive bonding for marine applications (opens in a new tab) Download PDF for Structural adhesive bonding for marine applications (opens in a new tab)

  12. Filler effects in resole adhesive formulations

    … was determined and used to develop an adhesive tack measurement based upon lubrication theory. In this work, the probe-tack test was adapted to a typical stress-controlled rheometer by using the normal force and displacement system to compress the adhesive between parallel plates. By …

    vt Repository record for Filler effects in resole adhesive formulations (opens in a new tab)

  13. Model adhesive studies using block copolymers

    The diversity of adhesive/adherend pairs has created innumerable unique combinations of thermodynamic, kinetic, chemical, physical and rheological contributions with which to explain adhesion processes. So complex are the interrelationships of these contributions to the overall composite system …

    vt Repository record for Model adhesive studies using block copolymers (opens in a new tab)

Page 1 of 177