Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 21 for “"adhesive joining"”.

  1. Examining Incoherent UV Light as an Assistant to IR Laser on Texturing of CFRP Composites for Adhesive Joining

    … for their high strength-to-weight ratio, but joining their structures presents challenges. Adhesive bonding is preferred to maintain lightweight advantages, yet strong bonds require precise surface preparation. Laser surface processing, a contactless method, has widely been applied to surface …

    liverpool-jm Repository record for Examining Incoherent UV Light as an Assistant to IR Laser on Texturing of CFRP Composites for Adhesive Joining (opens in a new tab) Download PDF for Examining Incoherent UV Light as an Assistant to IR Laser on Texturing of CFRP Composites for Adhesive Joining (opens in a new tab)

  2. Effect of Surface Treatment on Joint Performance and Fracture Morphology in Adhesively Bonded Al-Si Coated Ultra-High Strength Steel

    … strength steel (UHSS), but requires new joining solutions for integration in future multi-material structures. Structural adhesives enable multi-material joining, and have been used to enhance the joint performance for mono-material structures to achieve improved joint strength and …

    waterloo Repository record for Effect of Surface Treatment on Joint Performance and Fracture Morphology in Adhesively Bonded Al-Si Coated Ultra-High Strength Steel (opens in a new tab)

  3. Axisymmetric Finite Element Modeling of Adhesive Joint Between a Laminated Composite and Metal Cylinder

    … a method to join them with metals is needed. Adhesive joining, or gluing, has been determined to be the most promising option. For the joining technique to be used, engineers must be able to predict how the joined materials will behave when placed under load and/or temperature change. A widely …

    utahstate Repository record for Axisymmetric Finite Element Modeling of Adhesive Joint Between a Laminated Composite and Metal Cylinder (opens in a new tab)

  4. Investigation of Fore-Aft Element Connectors for an ultra-efficient Slotted, Natural-Laminar-Flow Aircraft Wing

    … further evaluate potential weight reduction the adhesive joining of composite overlay to a metallic substrate is investigated with the use of non-deterministic approaches including global sensitivity analysis, surrogate modeling, and reduced order modeling.</p>

    utk-theses Repository record for Investigation of Fore-Aft Element Connectors for an ultra-efficient Slotted, Natural-Laminar-Flow Aircraft Wing (opens in a new tab)

  5. Application of high-impact polystyrene (HIPS) as a graphene nanoparticle reinforced composite thermoplastic adhesive

    "Adhesive bonding is a more efficient joining method for composites than traditional mechanical fasteners and provides advantages in weight reduction, simplicity, and cost. In addition, the utilization of mechanical fasteners introduces stress concentrations and damage to the fiber-matrix …

    msu Repository record for Application of high-impact polystyrene (HIPS) as a graphene nanoparticle reinforced composite thermoplastic adhesive (opens in a new tab)

  6. Impact of moisture uptake in uncured bond lines on joints performance

    Adhesive bonding is a joining technique use to bond two surfaces together by using solidification or hardening that is non-metallic. For example, adhesive joining is mainly used in bonding sheet metal together in the car body in the automotive industry. The advantage of adhesive bonding is that it …

    chalmers Repository record for Impact of moisture uptake in uncured bond lines on joints performance (opens in a new tab)

  7. Vibrational and guided wave based approaches for quantitative NDE of adhesive composite joints

    Adhesive composite joining technology attracts high interest due to its critical advantages for structural repair and integrated manufacturing of complex next generation composite structures. One of the main issues to be resolved for broader acceptance of this technology is robust nondestructive …

    nebraska Repository record for Vibrational and guided wave based approaches for quantitative NDE of adhesive composite joints (opens in a new tab)

  8. Theoretical and experimental analysis of adhesive composite joints

    … are used in repair of aerospace structures. Adhesively bonded composite patches are capable of minimizing balance and clearance problems on control surfaces and can be readily formed to complex aircraft contours. Reinforcement in a patch can be tailored to suit the loading configuration and …

    nebraska Repository record for Theoretical and experimental analysis of adhesive composite joints (opens in a new tab)

  9. Experimental Assessment and Computational Modeling of Adhesive, Self Piercing Rivets (SPR), and Hybrid (Adhesive-SPR) Joints: Enhancing Joint Performance for Aluminum Sheet Material

    … structures in the automotive industry are robust joining methods that play a crucial role in structural performance; crashworthiness; durability; and noise, vibration and harshness. Structural adhesives and self-piercing rivets (SPRs) have demonstrated aluminum and multi-material joining …

    waterloo Repository record for Experimental Assessment and Computational Modeling of Adhesive, Self Piercing Rivets (SPR), and Hybrid (Adhesive-SPR) Joints: Enhancing Joint Performance for Aluminum Sheet Material (opens in a new tab)

  10. Application of a Rate Dependent Cohesive Zone Model to Predict Impact Response in Adhesively Bonded Ultra-High Strength Steel Tubes

    … (MMLV) structures incorporating structural adhesive joining requires advanced CAE supported by material characterization and computational model validation at the component level. In this thesis, tailored hot stamped (THS) ultra-high strength steel (UHSS) hat sections were joined using …

    waterloo Repository record for Application of a Rate Dependent Cohesive Zone Model to Predict Impact Response in Adhesively Bonded Ultra-High Strength Steel Tubes (opens in a new tab)

  11. Environmental effects on epoxy adhesive and joints

    The use of adhesive joining in mechanical structures, especially in industrial usage, is rapidly increasing. However, to be confident in their use it is essential to evaluate the performance of the joints, especially when their strength tends to decrease upon exposure to warm and humid conditions …

    poli-torino Repository record for Environmental effects on epoxy adhesive and joints (opens in a new tab)

  12. Characterization of Structural Adhesives Using Lap Shear and Pin and Collar Tests

    … with dissimilar materials using traditional joining methods can be challenging. Adhesive bonding is one alternative to traditional methods with advantages in areas such as mitigation of galvanic corrosion, reducing stress concentrations, and enhanced fatigue strength. The strength of an …

    waterloo Repository record for Characterization of Structural Adhesives Using Lap Shear and Pin and Collar Tests (opens in a new tab)

  13. Development of Novel Multi-Material Adhesive Joints

    … structures are now widely used, for which proper joining techniques are critical for the high performance of the overall structures. Among commonly available joining technologies, the use of adhesive joints attracts the most attention due to their advantage of enabling the development of …

    lancaster Download PDF for Development of Novel Multi-Material Adhesive Joints (opens in a new tab)

  14. Joining of Dissimilar Materials

    … study was to produce alternative and efficient joining solutions for automotive and aerospace applications. The joining of dissimilar material was experimented to obtain light-weight Fibre Reinforced Polymer (FRP) sandwich composites, Al-foam sandwich (AFS) composites, hybrid dynamic FRP …

    poli-torino Repository record for Joining of Dissimilar Materials (opens in a new tab)

  15. Manufacturing of a Fiber-Reinforced Thermoplastic Composite Micro-Generating Wind Turbine Blade

    … void volume fraction (𝑉𝑐). Second, a suitable adhesive joining system for the composite was to be identified, with Mode I double cantilever beam and Mode II end notched flexural tests performed at room and low temperatures to simulate the expected ambient conditions in remote Northern Canadian …

    waterloo Repository record for Manufacturing of a Fiber-Reinforced Thermoplastic Composite Micro-Generating Wind Turbine Blade (opens in a new tab)

  16. Peripheral soldering of flip chip joints on passive RFID tags

    … external power source to transmit signals. Joining chips by laser beam welding have wide advantages over other methods of joining, but they are seen limited to transparent substrates. However, connecting solder bumps with anisotropic conductive adhesives (ACA) produces majority of the …

    unlv Repository record for Peripheral soldering of flip chip joints on passive RFID tags (opens in a new tab) Download PDF for Peripheral soldering of flip chip joints on passive RFID tags (opens in a new tab)

  17. JOINING OF CERAMIC COMPOSITES AND ADVANCED CERAMICS

    … of joints for ceramics and CMC are fundamental. Joining materials and techniques currently available to join ceramic and CMC include diffusion bonding using various active fillers, transient eutectic phase methods such as nano-infiltration and transient eutectic-phase (NITE), laser joining, …

    poli-torino Repository record for JOINING OF CERAMIC COMPOSITES AND ADVANCED CERAMICS (opens in a new tab)

  18. Characterizing and Modeling the Effects of Mode Mixity and Bond Line Thickness on the Traction-Separation Response of Structural Adhesive Joints

    As adhesive bonding continues to become more prevalent in automotive structures, the need for high fidelity characterization and modelling of adhesive joints has gained in importance. In this thesis, new specimen geometry and analysis techniques are presented to characterize the properties …

    waterloo Repository record for Characterizing and Modeling the Effects of Mode Mixity and Bond Line Thickness on the Traction-Separation Response of Structural Adhesive Joints (opens in a new tab)

  19. Urychlení manipulační pevnosti u 2K PUR lepidla

    Práce se věnuje urychlení doby k získání manipulační pevnosti u dvoukomponentního polyuretanového adheziva, které bylo nově zakoupeno ve firmě Magna Exteriors Bohemia a bylo potřeba otestovat. K urychlení po rozboru problému byly vybrány metody IR zářiče, teplotní komory, které se porovnávaly s …

    brno-tech Repository record for Urychlení manipulační pevnosti u 2K PUR lepidla (opens in a new tab)

  20. Ověření rychlosti vytvrzování a budování adheze PU lepidel v závislosti na vnějších podmínkách

    Firma IFE a. s. (Knorr – Bremse) v Modřicích potřebovala ověřit proces vytvrzování lepených spojů u používaného lepidla Sikaflex®-265. Cílem bylo zjistit, zda je k vytvrzování nutno řízené prostředí, a hlavně zjistit vliv daných faktorů na rychlost vytvrzování a rychlost budování adheze ve spoji. …

    brno-tech Repository record for Ověření rychlosti vytvrzování a budování adheze PU lepidel v závislosti na vnějších podmínkách (opens in a new tab)

Page 1 of 2