Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 123 for “"adhesive layer"”.

  1. Fine-scale modeling of failure in an adhesive layer

    … from a fine scale modeling of the removal of a layer of filter cake by a time dependent pressure pulse. In this model the filter cake is grid in 16,000 imaginary blocks on a filter, of area 160 cm2. The cleaning of the filter is simulated through 10 consecutive cleaning cycles. The model …

    wvu Repository record for Fine-scale modeling of failure in an adhesive layer (opens in a new tab)

  2. Mathematical modeling of adhesive layer cracks utilizing integral equations

    Within recent years, Crack analysis in adhesive layers has become a topic of interest for many researchers. A common model which is used incorporates a 3-region elasticity problem consisting of only 2 materials, the adhesive layer bounded by 2 layers of a stiffer elastic substrate. Cracks have been …

    vt Repository record for Mathematical modeling of adhesive layer cracks utilizing integral equations (opens in a new tab)

  3. Nondestructive inspection and quantification of carbon fiber laminates for barely visible impact damage and adhesive layer thickness measurements.

    … without compromising structural integrity. The layered structure of carbon fiber laminates constitutes the need for new testing procedures to quantify quality and inspect for defects, for both manufacturing and in-service. This research uses a novel high resolution ultrasonic non-destructive …

    baylor Repository record for Nondestructive inspection and quantification of carbon fiber laminates for barely visible impact damage and adhesive layer thickness measurements. (opens in a new tab)

  4. Laboratory and Finite Element Analysis study of potential factors involved in the failure of proximal resin composite sandwich restorations

    … the effect of tooth angulation on the adhesive thickness. (3)The second one was to assess the effect of the application technique on the adhesive thickness Experimentally, it was found that: 1. there was no difference in microleakage between the two curing protocols, 2. the thickness of …

    whiterose Download PDF for Laboratory and Finite Element Analysis study of potential factors involved in the failure of proximal resin composite sandwich restorations (opens in a new tab)

  5. Bending of a bonded beam as a test method for adhesive properties

    … is obtained for the shear stress state in the adhesive layer of a bonded cantilever beam subjected to an end load. The shear stress is constant through the thickness of the adhesive layer and varies from zero at the fixed end to a maximum value at the free end. This maximum value can, under …

    vt Repository record for Bending of a bonded beam as a test method for adhesive properties (opens in a new tab)

  6. Effect of Cyclic Deformation on the Corrosion of Coated AA6xxx Hem Flanges

    … an interconnect-ed network of pores within the adhesive layer of the hem flange coupons. Cyclic corrosion tests revealed that the inner compressive surface of the outer sheet (area B) was the weak link in the corrosion resistance of a hem flange due to the high degree of plastic deformation …

    mcmaster Repository record for Effect of Cyclic Deformation on the Corrosion of Coated AA6xxx Hem Flanges (opens in a new tab)

  7. Friction and Wear of Polytetrafluoroethylene/Graphene Oxide Composite Thin Films

    … of thin PTFE films through the addition of few layered graphene oxide (GO) as filler. In order to address adhesion issues, the addition of an adhesive layer of polydopamine (PDA) between stainless steel substrates and thin PTFE films was also investigated. An automatic friction abrasion analyzer …

    arkansas Repository record for Friction and Wear of Polytetrafluoroethylene/Graphene Oxide Composite Thin Films (opens in a new tab)

  8. Plasma-enhanced chemical vapor deposition of carbon nanofibers: correlations between process parameters and physicochemical properties

    … morphology and surface chemistry. Catalyst and adhesive layer selection further impacts these properties, while growth time serves as an additional tunable parameter. Despite extensive documentation of CNF growth via PECVD, systematic investigations into key aspects are lacking. For instance, …

    aalto Repository record for Plasma-enhanced chemical vapor deposition of carbon nanofibers: correlations between process parameters and physicochemical properties (opens in a new tab)

  9. Special 2-D and 3-D Geometrically Nonlinear Finite Elements for Analysis of Adhesively Bonded Joints

    … models have been successfully used to analyze adhesive bonds in actual structures, but this takes a considerable amount of time and a high computational cost. The objective of this study is to develop a simple and cost-effective finite element model for adhesively bonded joints which could be …

    vt Repository record for Special 2-D and 3-D Geometrically Nonlinear Finite Elements for Analysis of Adhesively Bonded Joints (opens in a new tab)

  10. The Effects of Bending on the Strain Distributions in a Stiffener-Skin Interface Region

    … study to assess the effect of bending on the adhesive strain distributions in a stiffener-skin interface region is described. A one-dimensional beam analysis is derived using a variational approach. Parametric studies are conducted to assess the effects of stiffener, skin, and adhesive …

    odu Repository record for The Effects of Bending on the Strain Distributions in a Stiffener-Skin Interface Region (opens in a new tab)

  11. Characterization of Mixed-Mode Fracture Testing of Adhesively Bonded Wood Specimens

    … rates (G) for mixed-mode (I/II) fracture of wood adhesive joints. The aims of the study were: (1) quantifying the fracture properties of two material systems, (2) analyzing the aspects that influence the fracture properties of bonded wood, (3) refining test procedures that particularly address …

    vt Repository record for Characterization of Mixed-Mode Fracture Testing of Adhesively Bonded Wood Specimens (opens in a new tab)

  12. The creep behaviour of structural adhesive joints

    … creep behaviour under load of three structural adhesives - a phenol formaldehyde/polyvinyl formal material and two forms of epoxide adhesive - when used to bond lap joints. Lap joints were subjected to constant load in spring loaded testing rigs. Shear creep in the adhesive layer has been …

    city-london Download PDF for The creep behaviour of structural adhesive joints (opens in a new tab)

  13. Laser Processing of Polyimide on Copper

    … samples include freestanding Kapton with no adhesive layer, freestanding Kapton with an adhesive layer, and Kapton with adhesive layered on copper. The laser processing used a single laser shot with the parameters being varied over a series of shots fired. The effect of the parameters was …

    vt Repository record for Laser Processing of Polyimide on Copper (opens in a new tab)

  14. Effects of Bondline Thickness on Nonlinear Interfacial Fracture of Bonded Adhesive Joint

    … industrial applications are dependent on layered substrates through adhesive bonding. The interfacial fracture of adhesively bonded structures is a critical issue for its extensive applications to a variety of modern industries. In the recent two decades, cohesive zone models (CZMs) have …

    lsu-thes Repository record for Effects of Bondline Thickness on Nonlinear Interfacial Fracture of Bonded Adhesive Joint (opens in a new tab)

  15. ASSESSMENT OF INTERFACIAL ADHESION IN POLYMER LAMINATED SHEET METALS

    The polymer laminated sheet metal (PLSM) is a layered material which involves a sheet metal substrate, a thin polymer film and an adhesive layer between the film and the substrate. The adhesion properties between the bonded materials are among the most important issues in PLSM forming operations. …

    mcmaster Repository record for ASSESSMENT OF INTERFACIAL ADHESION IN POLYMER LAMINATED SHEET METALS (opens in a new tab)

  16. Heat Transfer in Beaded Thermocouples Mounted on Solid Substrates-- Application to Transient Measurement Errors

    … the bead is glued to the surface by means of an adhesive, the thermal capacitance of the adhesive layer has negligible effect on the thermocouple response, while the thermal resistance of the adhesive layer dominates the response. The quasi-coupled solutions are used with numerical convolution to …

    unm Repository record for Heat Transfer in Beaded Thermocouples Mounted on Solid Substrates-- Application to Transient Measurement Errors (opens in a new tab)

  17. Micro-Raman spectroscopic studies on the adhesive-dentine interface and the degree of conversion of dental adhesives

    … of studies on monomer to polymer conversion in adhesive systems was undertaken using micro-Raman spectroscopy. A database of micro-Raman spectra was compiled for identification of tooth tissues and materials. The degree of conversion was assessed as a function of time and light source. Linear …

    edinburgh Repository record for Micro-Raman spectroscopic studies on the adhesive-dentine interface and the degree of conversion of dental adhesives (opens in a new tab)

  18. Stress transfer between FRP reinforcement and concrete

    … the bond line and through the thickness of the adhesive layer for the RC members strengthened either by NSM or externally bonded plate (EBP) FRP technique.

    bristol Repository record for Stress transfer between FRP reinforcement and concrete (opens in a new tab) Download PDF for Stress transfer between FRP reinforcement and concrete (opens in a new tab)

Page 1 of 7