Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 71 for “"adiabatic temperature"”.
-
Investigation of calculated adiabatic temperature change of MnFeP1-xAsx alloys
… data including specific heat, magnetization and adiabatic temperature change, . For a reversible material can be attained directly from measurement or indirectly through calculation from specific heat and magnetization data. Data sets of nine MnFeP1-xAsx alloys are used to compare calculated …
-
Adiabatic Temperature Rise and Durability Performance of Slag Blended Concrete
… optimization, external sulfate resistance, adiabatic temperature rise and chloride ingress. Adiabatic temperature rise was assessed on 60% slag blended concrete, using Type II(MH) and Type IL(10) cements with slags having 8 to 17% Al2O3. Studies revealed that 60% cement replacement with all …
-
Temperature rise of cement blends
This study aims to investigate the temperature rise of various binders under adiabatic conditions. Furthermore, it seeks to evaluate the effect of the amount of binder and the water-binder ratio on the temperature rise of concrete. The study is carried out using a Temperature Match Conditioning …
-
Effects of convex curvature on adiabatic effectiveness for a film cooled turbine vane
… in 2r/d = 28, matching the high curvature row. Adiabatic temperature measurements were then carried out for blowing ratios of M = 0.30 to 1.60 tested at a density ratio of DR = 1.20. The results indicated that there was some scaling of performance present with matching 2r/d, but there was not an …
-
Thermal Stress Analysis for Early Age Mass Concrete Members
… this study, a way to predict early age concrete temperature and associated thermal stresses is described, including the needed experimental testing and finite element modeling technique.;In thermal analysis, an adiabatic calorimeter was designed and built to measure the adiabatic temperature rise …
-
STUDY OF ELECTROCALORIC EFFECT IN LEAD FREE FERROELECTRIC CERAMICS
… relations. In BZT-xBCT ceramics, the maximum adiabatic temperature change Δ𝑇 was found to shift from the proximity of Curie temperature to higher temperatures, owing to a synergistic effect of field induced change in the phase transition temperature and alignment and growth of polar …
-
Epitaxial lead-free oxide layers for electrocaloric studies
… effect (ECE) refers to the reversible adiabatic temperature change that occurs in polar materials when an external electric field is applied or varied. In ferroelectric materials, the ECE is particularly pronounced at the transition temperature between the ferroelectric and paraelectric …
-
Direct Measurements of the Magnetocaloric Effect in Pulsed Magnetic Fields
… The emphasis is on the direct measurement of the adiabatic temperature change Tad in pulsed magnetic fields, because the pulsed-field data allow for an analysis of the sample-temperature response to the magnetic field on a time scale of 10 to 100 ms, which is on the order of typical operation …
-
Characterisation of mechanical responses of nickel based superalloys to deformation at high strain rates and high temperatures
… under high strain rate deformation at elevated temperatures. The strain rates tested are from 0.5s<sup>−1</sup> up to 3000s<sup>−1</sup> and the temperatures from 700◦C up to 1200◦C at 100◦C intervals, with a heating rate of 100◦Cs<sup>−1</sup> or 50◦Cs<sup>−1</sup> at higher temperatures. These …
-
Role of extrinsic factors in utilizing the Giant Magnetocaloric Effect on materials: Frequency and time dependence
… of a solid must be changed by SM as a result of adiabatically magnetizing the material, thus resulting in an increase of the lattice vibrations and the adiabatic temperature change, ∆Tad. Both the isothermal entropy change SM and adiabatic temperature change ∆Tad are important parameters in …
-
Investigation of Structural Properties and their Relation to the Phase Transitions in Shape Memory Heusler Compounds
… scattering factor. Direct measurement of the adiabatic temperature change ΔTad was done in pulsed magnetic fields, because of fast response of ~10 to 100 ms to the sample temperature on magnetic field, providing adiabatic conditions. It also gives an opportunity of very high magnetic fields up …
-
MAGNETOCALORIC, MAGNETORESISTANCE AND MAGNETODIELECTRIC EFFECTS IN UNDOPED AND DOPED EuTiO3
… Magnetocaloric effect refers to change in adiabatic temperature and isothermal entropy of a magnetic sample and it is much sought after magnetic refrigeration. We found that EuTiO3 exhibits the highest adiabatic temperature change among the transition metal oxides of perovskite structure. …
-
Modelagem da reação de hidratação do cimento Portland utilizando métodos de calorimetria
… presents a homogenization model for predicting adiabatic temperature rise from theoretical microconcrete (made from class G cement or CPII-E cement, limestone filler and natural fine aggregate) using the thermal properties of its components. The proposed model uses primary output data from …
-
EXPLORING THE STRUCTURAL, ELECTRONIC, AND MAGNETORESPONSIVE PROPERTIES OF NOVEL MAGNETIC MATERIALS IN BULK, RIBBONS, AND THIN FILMS
… and hydrostatic pressure measurements. The adiabatic temperature change (∆Tad) by a direct method and through thermomagnetic measurements in magnetic fields up to 14 T has been performed for these alloys. Also the mixed effect of pressure and magnetic field on the transition temperature of …
-
Effect of Dosage of Non-Chloride Accelerator versus Chloride Accelerator on the Cracking Potential of Concrete Repair Slabs
… parameters using calorimetric studies, and adiabatic temperature rise profiles. Autogenous shrinkage was also measured to assess the effect of moisture consumption on concrete volume contraction. The findings of the current study indicate that the cracking risk associated with calcium …
-
Methods of activation energy calculation for portland cement
Cracking in massive concrete structures due to temperature-induced stresses is a problem almost as old as concrete itself. Thermal gradients in bridge elements have historically been ignored in the U.S. As element size increases for structural, traffic, or aesthetic reasons, thermal gradients and …
-
Thermal image analysis using calibrated video imaging
This research work introduces new techniques for temperature measurement that utilizes visual spectrum of light. A periscope with a CCD camera is used to capture the image from a high temperature gas fired furnace and calculate the temperature distribution of flame and furnace wall. The proposed …
-
QUANTITATIVE UNDERSTANDING OF TEMPERATURE RISE AND SAFETY IN HIGH – ENERGY SOLID – STATE BATTERIES.
… 4000 to 5400 J/g NMC811, with a corresponding adiabatic temperature rise of 1300 – 1750 ℃. When small amounts of liquid electrolyte are added, the onset temperature is lowered, and the heat release shifts to higher temperatures. However, the total heat generation remains within a similar range. …
-
On-Site Measurement of the Water-Cementitious Ratio and Heat of Hydration of Delivered Concrete
… material on each side. It acted as a semi-adiabatic calorimetry since the heat loss was small. The temperature-time history at the center was used to calculate the adiabatic temperature rise (ATR) of the concrete. An average heat loss characteristic parameter was obtained for each delivered …
-
Magnetocaloric effect in Gd1-xCexNi (x = 0 - 0.6): a cost-effective approach to tuning Curie temperature from 70K to 30K
… is increased, the cost effectiveness of the adiabatic temperature change (ΔTad) increases as high as 20% for (Gd0.4Ce0.6)Ni while the magnetic entropy change (-ΔSm) shows minimal improvement in cost effectiveness, falling from 3.93J/kg*K in GdNi to 1.75J/kg*K in (Gd0.4Ce0.6)Ni at 1T applied …
Page 1 of 4