Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 31 for “"aeroengine"”.
-
Methods for Decarbonized Aeroengine Combustor Design
… generation. Possible alternative options for aeroengine combustion and propulsion include batteries or hydrogen fuel for fuel-cells or thermal-powered gas turbines. More specifically, thermal-powered aeroengines with premixed flame regimes can promise ultra-low emissions. Future aeroengine …
-
Water droplet erosion of aeroengine fan blades
… droplets of water are ingested into the aeroengines. These impinge the fan blades at high-speed, resulting in Water Droplet Erosion (WDE) of the leading-edge. Despite decades of reduced aeroengine efficiency and increased risk of unstable blade vibrations, there had been little previous …
-
Additive manufacturing of graded microstructures for aeroengine components
The microstructure formed after laser powder bed fusion (L-PBF) depends on the thermal gradient and solidification rate with the complex physical interactions of the melt pool and heat flow also impacting the solidifying structure. Due to the layer-by-layer methodology applied in L-PBF, modifying …
-
Predicting fan noise propagation in aeroengine bypass ducts
This thesis explores the prediction of rearwards fan noise propagation within the bypass duct and its radiation into the far feld. Two recently developed models: B-induct and GXMunt, are exploited in application to real engine bypass ducts and their performance is evaluated. These methods are an …
-
In-duct measurement techniques for the characterisation of broadband aeroengine noise
The focus of this thesis is the measurement of broadband fan noise, which due to reductions in tonal and jet noise, is now the dominant source at approach, and a major contributor at takeoff. This thesis proposes three new in-duct measurement techniques for the characterisation and measurement of …
-
Design Optimisation and Flow Characterisation for Future Aeroengine Axial Fan Blades
The increased need to design higher performing aerodynamic shapes has led to design optimisation cycles requiring high-fidelity CFD models and high-dimensional parametrisation schemes. The computational cost of employing global search algorithms on such scenarios has typically been prohibitive for …
-
Fuel Droplet Optical Diagnostic Techniques for Lean Premixed Prevaporized Aeroengine Combustors
Recent advancements in civil supersonic transport (CST) have sparked interest in developing new technologies aimed at reducing the environmental impact of CST jet engines. Because these engines require lower pressure and bypass ratios, they tend to consume more fuel and produce higher emissions …
-
Feedback control of sector-bound nonlinear systems with applications to aeroengine control
This dissertation is divided into two parts. In the first part we consider the problem of feedback stabilization of nonlinear systems described by state-space models. This approach is inherited from the methodology of sector bounded or passive nonlinearities, and influenced by the concept of …
-
Structural Dynamic Analysis and Health Monitoring of Aeroengines: Nonlinear Modelling of Bolted Flange Connections and Transfer Path Analysis
… and implemented on aircrafts, specifically aeroengines. Initially, by proposing a novel nonlinear experimental protocol in conjunction with finite element modelling methodologies, the underlying nonlinear dynamic characteristics of the aeroengine casing assemblies were determined at a …
-
Laser Induced Incandescence for Volume Fraction and Relative Particle Size Measurements in a Rich-Quench-Lean Jet A Combustor
… mostly of soot, is an important goal for modern aeroengine combustors. Not only does soot production reduce engine performance, but it also creates unwanted pollution. In order to understand soot production in realistic environments, this thesis focuses on the measurement of soot volume fraction …
-
Διερεύνηση εναλλακτικών διατάξεων ψύξης καυσαερίου με ταυτόχρονη θέρμανση αερίου μίγματος σε αεροπορικούς κινητήρες
… of a heat exchanging installation for aeroengine applications. The investigation includes both pressure drop and heat transfer inside a heat exchanger. For the pressure drop, the heat exchanger was considered as a porous medium and experimentally derived laws were used to predict its …
-
Zlepšování Braytonova oběhu leteckých plynových turbín
… jako je IRA (Mezichladicem Recuperancni Aeroengine), coz je project z Technicke University v Mnichove. Vyvetluje ruzne studie o tepelnych vymeniku a jak tyto zmeny by mohly prispet ke slepseni spotreby paliva.
-
Design and development of permanent magnet synchronous machines shaft-line embedded in aeronautic engines
… which connects the actual generators to the aeroengine shaft can be eliminated. The MEA and the MEE concept can be considered as an evolutionary implementation of the `All Electric Aircraft (AEA)', in which all the aircraft on-board systems are supplied in an electrical form. The MEE concept …
-
Circularity in Aero-engine components production through additive manufacturing at GKN Aerospace Sweden
… The study examines GKN Aerospace's various aeroengine production methods and identifies potential circular approaches, such as the reuse and recycling of metal powders, the implementation of closed-loop systems and recommendation of circular approaches to enhance sustainability. Furthermore, …
-
Sustained macroscopic deflected cracking in Nickel based superalloys : mechanism and design criteria
… methodologies for lifing of such cracks in aeroengine components. The SMDCG effect has been observed under externally applied mode I loading in Udimet 720Li with relatively fine grain sizes of 6-18?m, which are candidate materials for aero engine turbine discs. CNB and single edge bend notch …
-
Ultrasonic assisted creep feed grinding and dressing of advanced aerospace alloys
… assisted creep feed grinding (UACFG) of advanced aeroengine alloys, in particular Inconel 718, CMSX-4 and gamma titanium aluminide (γ-TiAl). For tests with ultrasonic vibration, workpieces were actuated at a constant frequency (~20kHz) via a specially designed block sonotrode attached to a 1kW …
-
The machinability of a gamma titanium aluminide intermetallic
… and low pressure (LP) turbine sections of an aeroengine due to the alloys high temperature (~800C) and low weight properties. Following a literature review, the thesis details the results from two phases of experimental work. The first focused on high speed milling trials using coated tungsten …
-
Characterisation of IN718 fasteners for aero-engine applications
Standard IN718 fasteners are widely employed in aeroengine applications owing to their exceptional mechanical properties, including tensile, fatigue and creep strength at temperatures up to 650°C. Notably, IN718 is a cost-effective choice compared with other alloys [1]. However, the flexibility …
-
Thin film sensor techniques for the instrumentation of ceramic/metal interfaces in next generation aero gas turbines
The growth of thrust and improved aeroengine efficiency has been gained byincreased temperatures throughout the engine. This has been achieved by improvedmaterial technology and the continuous cooling of components complemented by theaddition of thermal barrier coatings (TBC) to turbine and …
Page 1 of 2