Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 22 for “"aerosol performance"”.
-
Influence of carrier particle size and surface roughness on the aerosol performance of DPI formulations
… of carrier particles on drug dispersion performance from passive dry powder inhalers has been extensively studied topic, and a consensus has been reached regarding the adverse effect that larger carrier particle diameters impart to aerosol performance. However, previous studies have …
-
Influence of engineered particulate lactose on the performance of DPI formulations
… smaller diameters were preferable to maximize aerosolization efficiency (the ability of the drugs to be delivered to the lung), it was found recently that lactose carriers with large size also can improve aerosol performance, especially when combined with greater surface roughness and an …
-
FORMULATION, CHARACTERIZATION AND PHARMACOKINETIC MODELLING OF EXCIPIENT ENHANCED GROWTH SPRAY-DRIED INHALATION POWDERS
… conditions on solid-state characteristics and aerosol performance of excipient enhanced growth (EEG) powders and to formulate a stable and highly dispersible tobramycin EEG powder to be delivered to pediatric cystic fibrosis subjects using a novel positive pressure dry powder inhaler. …
-
Design of wetted wall bioaerosol concentration cyclones
… characterization of a family of wetted wall bioaerosol cyclone concentrators that consume very low power and are capable of delivering very small liquid effluent flow rate of highly-concentrated hydrosol. The aerosol-to-aerosol penetration cutpoint for the cyclones is about 1µm. The …
-
Characterization, modeling, and application of thin-film freeze-drying
… optimized to achieve high phage stability and aerosol performance. Powder characterization showed an amorphous phase consisting primarily of trehalose and crystalline phases of mannitol and leucine. Low residual moisture content also helped to increase the aerosol performance. The resulting …
-
NanoClusters Enhance Drug Delivery in Mechanical Ventilation
… known as `NanoClusters') are fine dry powder aerosols that were hypothesized to enable drug delivery through ventilator circuits. This Thesis systematically investigated formulations of NanoClusters and their aerosol performance in a conventional inhaler and a device designed for use during …
-
Inhalable dosage forms containing difficult-to-formulate drugs : compositions and processing design space
… during storage, which can affect the drug aerosolization and drug release upon deposition in the airway. The third study aimed to investigate the feasibility of thin film freezing to prepare dry powder for inhalation containing a high potency of amorphous tacrolimus. We found that using …
-
Optimization of next generation inhalable powders for the treatment of pulmonary infections
… generation DPIs must exhibit efficient powder aerosolization, promote drug stability, and ensure reproducible lung deposition independent of lung function. To achieve wide-spread global utilization, particularly in developing economies, cost-constraints and scalability of manufacturing …
-
Toward improving the target site delivery and efficacy of immune checkpoint inhibitors utilizing thin-film freezing and immunogenic chemotherapy
… porous, brittle, powder matrices with excellent aerosol performance properties and high stability. Herein, we describe the process of TFF and how it achieves excellent powder and aerosol properties compared to other cryogenic techniques. We then describe an application of TFF, formulating …
-
Investigation and Optimization of a Solvent / Anti-Solvent Crystallization Process for the Production of Inhalation Particles
… a size range suitable for inhalation. In vitro aerosol performance of these IPA-AS particles was found to be superior compared to the conventionally used micronized particles when aerosolized from the Novolizer®. The solvent / anti-solvent systems investigated and optimized for combination …
-
Overcoming challenges of solid dosage formulation development by using emerging technologies
… prepared by thin-film-freezing (TFF) technology. Aerosol performance, which can be indicated by fine particle fraction and mass median aerodynamic diameter, is one of the most important factors when developing inhaled dry powder. In this chapter, we first obtained a tabular dataset containing …
-
Development of high potency voriconazole nanoaggregates for dry powder inhalation
… texture of these nanoaggregates and thus the aerosolization properties of the powder. This unique particle structure was the result of phase-separated crystalline nanoparticles of mannitol oriented on the surface of voriconazole nanoaggregates, reducing van der Waals forces between …
-
Development of a new method of determining pharmaceutical aerosol plume geometry based on drug mass and inhalation flow
… techniques capable of predicting in vivo aerosol performance and assisting in the understanding of inhaler performance is critical. Plume geometry for pressurized metered dose inhalers (pMDIs) and nasal sprays has been a long-standing characterization technique that is used, for example, …
-
Development of dry powder Inhaler and nebulised nanoparticles formulations of chrysin for the potential treatment of asthma. Development of dry powder inhaler of chrysin and nebulised nanoemulsion combination of chrysin and budesonide; Evaluating the anti-inflammatory activity of the combination formulation of chrysin and budesonide for asthma
… Therefore, this study aimed to assess the aerosol performance of chrysin formulations as well as the performance of combined formulations of chrysin and budesonide. Dry powder inhaler formulations were used first, where chrysin was processed using three different techniques, namely …
-
Investigation of the plasma electrolytic polishing process for metallic surface treatment
… treated with PEP showed improved tribological performance, primarily due to enhanced coating-to-surface adhesion. Furthermore, the thesis delves into monitoring the PEP process using various diagnostic techniques. Calorimetric measurements revealed the energetic aspects of the workpiece in …
-
Twin-screw extrusion for development of complex dosage forms
… (CQAs), such as content uniformity and in-vitro aerosol performance, were characterized. Properties of powders produced using the novel continuous mixing method were compared to those produced by low and high-shear batch mixing. The impact of process parameters (screw profile, number of passes …
-
Expanding the Performance and Functionality of Air-Jet Dry Powder Inhalers Across Multiple Applications
This dissertation aims to expand the performance and functionality of air-jet dry powder inhaler (DPI) applications through the development of a next-generation, mesh-nebulizer-based, and scalable spray dryer for the production of pharmaceutical aerosols, along with new spray-dried formulation …
-
Studies in Aerosol Drug Formulation, Analysis, and Modeling
… spurred the development and reevaluation of aerosolized pharmaceuticals. Chlorofluorocarbon (CFC) propellants were commonly used in pressurized metered dose inhalers (MDIs), but were unfortunately linked to the depletion of the ozone layer. As such, a search for new propellants was initiated …
-
Improved inhalation therapies of brittle powders
… aerodynamic properties. Also, we developed a performance verification test (PVT) for the Next Generation Cascade Impactor (NGI), which is one of the most important in vitro characterization methods to test inhalation. In the first study, we used TFF technology to produce amorphous and brittle …
-
New process development of dense gas technology for the processing of pharmaceuticals
… excellent access to the circulatory system. Aerosols suspended in inspired air may deposit on lung epithelia and be available for systemic absorption. To evade the defense mechanism of the human respiratory tract, particle sizes have traditionally been minimized to achieve necessary aerosol …
Page 1 of 2