Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 9 of 9 for “"agglomerate model"”.
-
Development of a Stochastically-driven, Forward Predictive Performance Model for PEMFCs
… coupled, transient, and mechanistic performance model for a PEMFC membrane electrode assembly has been developed. The model explicitly includes each of the 5 layers within a membrane electrode assembly and solves for the transport of charge, heat, mass, species, dissolved water, and liquid water. …
-
Mass Transport and Durability of Proton-Exchange-Membrane Fuel Cell Electrodes
… and porosity were fitted to surface texture models. It was found that cathode sustained its wettability after up to 35 wt% of carbon support loss, at which the cell performance dropped below the DOE’s durability-performance target. In the surface functionalization study, three schemes were …
-
A Microscopic Continuum Model of a Proton Exchange Membrane Fuel Cell Electrode Catalyst Layer
A series of steady-state microscopic continuum models of the cathode catalyst layer (active layer) of a proton exchange membrane fuel cell are developed and presented. This model incorporates O₂ species and ion transport while taking a discrete look at the platinum particles within the active …
-
Investigation of transient phenomena of proton exchange membrane fuel cells
… in this thesis is a contribution to the modeling and understanding of the dynamic behavior of proton exchange membrane fuel cells (PEMFCs). A time-dependent, two-phase non-isothermal model of the membrane electrode assembly was developed and implemented using the finite element method. In …
-
A 2D across-the-channel model of a polymer electrolyte membrane fuel cell : water transport and power consumption in the membrane
… have been studied in this thesis using computer modelling. The polymer electrolyte membrane (PEM) conductivity of a PEM fuel cell (PEMFC) depends on the hydration state of the hydrophilic charged sites distributed in the pores of the membrane. Water humidification of these charged sites is …
-
Multiphysics modelling of PEM fuel cells - with reacting transport phenomena at micro and macroscales
… reactions in the catalyst layers, an advanced agglomerate model has also been used that takes into account the morphological details of the materials present in the catalyst layers. Since, the liquid water transport in the gas diffusion layer represents one of the most critical phenomenons, a …
-
Mechanics and charging of nanoparticle agglomerates.
… first part concerns studies on mechanics of real agglomerate particles and the second part involves studies on unipolar diffusion charging of agglomerates. Understanding mechanics of real agglomerate particles consisting of multiple primary particles is important for aerosol sizing instrumentation …
-
Computational modeling and optimization of proton exchange membrane fuel cells
… single phase membrane electrode assembly (MEA) model. The model input parameters are the manufacturing parameters used to build the MEA: platinum loading, platinum to carbon ratio, electrolyte content and gas diffusion layer porosity. The governing equations of the fuel cell model are solved …
-
EFFECT OF IMPURITIES ON PERFORMANCE OF PROTON EXCHANGE MEMBRANE FUEL CELL COMPONENTS
… (determined from esterification) and from the agglomerate model were found to correspond well with results available in the literature. Another harmful impurity for PEMFC performance is CO. It significantly affects the hydrogen oxidation reaction (HOR) on Pt in the anode catalyst layer by …