Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 39 for “"air void content"”.

  1. Radar in non-destructive testing of thin granular dielectric layers

    … a commonly used quality control method for the air void content of newly laid asphalt pavements. The air void content has an effect on the long-term performance of the pavement. The GPR method is based on deriving the relative permittivity, or dielectric constant, from the reflected radar …

    aalto Repository record for Radar in non-destructive testing of thin granular dielectric layers (opens in a new tab)

  2. Issues pertaining to laboratory evaluation of hot mix asphalt

    … to ignition oven testing using the NCAT Asphalt Content Tester. 3) Comparison of the bulk specific gravity, saturated, surface dry (SSD) method with bulk specific gravity, Parafilm<sup>™</sup> method for HMA specimens. These observational studies included HMA samples from over 20 paving projects …

    ut-knoxville Repository record for Issues pertaining to laboratory evaluation of hot mix asphalt (opens in a new tab)

  3. Impact resonance test protocol for bituminous mixture property evaluation

    … recommended a sawn surface condition to avoid damp impacts. A force greater than 60 N is also recommended to achieve the desired amplitude and avoid damp impacts. Additionally, using a glue-based mounting system improves adhesion and enhances signal accuracy. To recommend suitable specimen …

    ets-quebec Download PDF for Impact resonance test protocol for bituminous mixture property evaluation (opens in a new tab)

  4. Multiphysics Modelling and Mitigation of Ageing in Asphalt Pavements

    Bitumen binders oxidise with air and cause ageing deterioration of asphalt pavements in the form of hardening, cracking and an overall decline in the mechanical performance. The degree of oxidative ageing is governed by many coupled internal and external physics and variables, making it difficult …

    aston Download PDF for Multiphysics Modelling and Mitigation of Ageing in Asphalt Pavements (opens in a new tab)

  5. NUMERICAL AND EXPERIMENTAL INVESTIGATIONS OF MOISTURE TRANSPORT IN ASPHALT MIXTURES

    … coefficient of permeability, porosity, and air void content of fine-graded hot-mix asphalt were studied. The coefficient of permeability increases as the air void and porosity values increase. After the second moisture conditioning, it was observed that specimens have a reduced porosity and …

    mtu Repository record for NUMERICAL AND EXPERIMENTAL INVESTIGATIONS OF MOISTURE TRANSPORT IN ASPHALT MIXTURES (opens in a new tab)

  6. Evaluation of Troxler 3241-C nuclear asphalt content gauge used for Marshall specimens

    Asphalt cement content is one of the most important requirements for producing high quality hot-mix asphalt. The determination of the asphalt cement content of hot-mix asphalt by traditional methods is time consuming and hazardous. A demand for faster and safer methodes) led to the development of a …

    vt Repository record for Evaluation of Troxler 3241-C nuclear asphalt content gauge used for Marshall specimens (opens in a new tab)

  7. Effect of specimen geometry and test configuration on the fracture process zone for asphalt materials

    … notch length, specimen thickness, loading rate, air void content, and asphalt binder on I-FIT global results and microstructural response. Multiple samples with varying notch lengths, thicknesses, and loading rates were evaluated to observe the effect of the test parameters. Then, samples with …

    uiuc Repository record for Effect of specimen geometry and test configuration on the fracture process zone for asphalt materials (opens in a new tab)

  8. EVALUATION OF THE HOT MIX ASPHALT COMPACTABILITY UTILIZING THE IMPACT COMPACTION METHOD

    … has a noticeably lower effect on decreasing air void content. A Superpave Gyratory Compactor was used to confirm the results obtained with the impact hammer, and a correlation was established.</p>

    ut-knoxville Repository record for EVALUATION OF THE HOT MIX ASPHALT COMPACTABILITY UTILIZING THE IMPACT COMPACTION METHOD (opens in a new tab)

  9. Characterization of High Porosity Drainage Layer Materials for M-E Pavement Design

    … treated permeable base mixture of different air void contents has also been quantified in laboratory. Numerical simulations are conducted to investigate the location effects and the contribution of the drainage layer as a structural component within pavement. The optimal air void content of …

    vt Repository record for Characterization of High Porosity Drainage Layer Materials for M-E Pavement Design (opens in a new tab)

  10. How Air Voids Affect the Performance of Concrete Subjected to Fire

    … to release the interior pressure. Recently, air entrained concrete is thought to be a suitable alternative to polypropylene fiber reinforced concrete under fire conditions. The fundamental point of this study is to identify how the percentage of air voids, and the combination of polypropylene …

    washington Repository record for How Air Voids Affect the Performance of Concrete Subjected to Fire (opens in a new tab)

  11. Climate impact on the durability of asphalt concrete

    … regard to variations of temperature and moisture content. Laboratory testing of AC with various mix compositions under repeated pore pressure loadings to quantify the influence of mixcomposition against moisture sensitivity was performed. The influence of climate parameters, i.e. moisture content …

    lund Repository record for Climate impact on the durability of asphalt concrete (opens in a new tab) Download PDF for Climate impact on the durability of asphalt concrete (opens in a new tab)

  12. Caracterização microestrutural de matrizes asfálticas de agregados finos a partir da microtomografia computadorizada

    … of a methodology for the identification of air voids corresponding to FAMs in asphalt concrete mixtures from images acquired using X-ray micro-computed tomography (micro-CT) and digital image processing (DIP) with segmentation techniques based on artificial intelligence models. The results …

    brazil-uerj Repository record for Caracterização microestrutural de matrizes asfálticas de agregados finos a partir da microtomografia computadorizada (opens in a new tab)

  13. Laboratory evaluation of asphalt-portland cement concrete composite

    … Composite (APCCC) is a hot-mix asphalt with air voids in the range of 25 to 30 percent which is later filled with resin modified cement grout. The resin modified cement grout consists of portland cement, fly ash, sand, water, and prosalvia (PL7) additive. The objective of the research was …

    vt Repository record for Laboratory evaluation of asphalt-portland cement concrete composite (opens in a new tab)

  14. Application of computer vision for roller operation management

    … may cause aggregate degradation and low air void content facilitating bleeding and rutting. On the other hand too little compaction may result in higher air void content facilitating oxidation and water permeability issues, rutting due to further densification by traffic and reduced …

    wvu Repository record for Application of computer vision for roller operation management (opens in a new tab)

  15. Investigation of Fine Asphalt Concrete Mixture Gradations with Improved Durability

    … with finer aggregate gradations exhibit lower air void content and higher moisture damage resistance than coarser aggregate gradations. Moreover, finer gradations have enhanced the stiffness and strength of asphalt mixtures, resulting in improved resistance to permanent deformation and fatigue …

    unr Repository record for Investigation of Fine Asphalt Concrete Mixture Gradations with Improved Durability (opens in a new tab)

  16. Ground Penetrating Radar for Asphalt Concrete Density Profiling

    … and sensitivity; identifying the optimal air void content prediction model; understanding the sensitivity of dielectric to asphalt mixture variability; and lack of significant field deployment experience. This research focused on a high-frequency (2.5 GHz), multi-channel, GPR system, which …

    tamu Repository record for Ground Penetrating Radar for Asphalt Concrete Density Profiling (opens in a new tab)

  17. Hot Mix Asphalt Permeability: Tester Size Effects and Anisotropy

    … and analyze. A series of samples with different air void contents were used to observe how the ratio of vertical to horizontal permeability changes with air void content. The second goal was to develop a modified field permeameter to study the water-pavement contact area effect on field …

    vt Repository record for Hot Mix Asphalt Permeability: Tester Size Effects and Anisotropy (opens in a new tab)

  18. Analysis of Fine Asphalt Concrete Mixture Gradations from Various Sources to Enhance Durability

    … finer gradation asphalt mixes have lower air void content and therefore higher moisture damage resistance. This is because the finer aggregates tend to fill the voids that were otherwise not filled by the coarse aggregates. This will lead to enhanced durability because less water and air …

    unr Repository record for Analysis of Fine Asphalt Concrete Mixture Gradations from Various Sources to Enhance Durability (opens in a new tab)

  19. Effect Of Bio-Binders On Binder And Mix Properties With High Rap Content

    … the stiffness of binder and mixes with high RAP content. Two oils, namely Waste Cooking Oil (WCO), and Soy Oil are potential sources of bio-binder that are abundant and yet to be explored. This research was conducted to explore the effects of selected bio-binders on binder and mixture properties …

    nodak Repository record for Effect Of Bio-Binders On Binder And Mix Properties With High Rap Content (opens in a new tab)

  20. COMPARISION OF OPEN GRADED FRICTION COURSE MIX DESIGN METHODS CURRENTLY USED IN THE UNITED STATES

    … then conducted to determine the optimum binder content. The optimum binder content (OBC) of a single aggregate gradation for each method was tested for properties and performance characteristics. The design methods which are currently used all fall into three categories. The first is a property …

    clemson Repository record for COMPARISION OF OPEN GRADED FRICTION COURSE MIX DESIGN METHODS CURRENTLY USED IN THE UNITED STATES (opens in a new tab)

Page 1 of 2