Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 29 for “"alkali concentration"”.
-
Sugar Recoveries from Corn Stover, Prairie Cord Grass, Switchgrass, and Big Bluestem using Microwave, Ultrasound, and Ozone Pretreatment Technologies
… and 20 min and chemical pretreatments with alkali (sodium hydroxide –NalH) and acid (sulphuric acid –H2SO4) were 0.1, 0.4, and 0.7% w/w. As a control for microwave, ultrasound and ozone treatments, feedstocks are also tested after soaking in deionized water (DI water). The compositional …
-
High-yield pulping of scots pine under strongly alkaline conditions
… Emphasis was put on the effect of liquor alkali concentration and pulping temperature. Under alkaline conditions, considerable polysaccharide losses occurred during the initial pulping or heating-up phase. Increases in the liquor alkali concentration at constant sulfidity provided …
-
A Theoretical Model of the Kraft Pulping Process
… content distribution, and the effective alkali concentration distribution within pulp chips as a function of cooking time. From this information the kappa number, yield, screen rejects, and kappa number distribution of the pulp are calculated. The model also predicts the bulk phase …
-
Hydrogenation of western hemlock tannin extracts.
… were hydrogenated in the presence and absence of alkali, using Raney nickel as a catalyst. The effect of time, temperature, alkali concentration and catalyst was studied by determining the total amount of phenolic substances (ether solubles) and the relative amounts of phenols and phenolic acids. …
-
Application of FTIR for Quantification of Alkali in Cement
Alkali-silica reaction (ASR) in cement is a major contributor to failure of cement structures around the world, causing increased repair costs and possible rebuild expenses. Alkali levels are indicative of the potential for ASR and are therefore measured and quantified. A linear correlation …
-
Estudo da influência das variáveis de síntese na morfologia e espessura da camada de nanofios de niobato de sódio suportado em nióbio
… seeks to correlate few synthesis’ variables, of alkali hydrothermal route, to morphology and thickness of sodium niobate nanowires layer supported on niobium platelets. An experimental design was planned to evaluate temperature, alkali concentration and reactional time influence on the produced …
-
Destruction and Defluorination of Ultrashort-Chain and Short-Chain Perfluoroalkyl Substances by Alkaline Hydrolysis
… acid (PFBA), under a high-temperature, alkaline environment in a continuous-flow reactor. The dissertation describes mechanistic insights and an evaluation of differences in their destruction and defluorination.For TFMS, two expanded operating regimes were developed that utilize phase …
-
Improving the functionality and bioactivity of wheat bran.
… mixing, high pressure homogenization (HPH), and alkali chemical treatments with different concentration, time, and temperature. Sample analysis included particle size, Wheat bran, including the aleurone layer, contains the vast majority of phenolic antioxidants found in the wheat kernel. …
-
Electrochemical Systems for CO2 Electrolysis and Hydrocarbon Upgrade
… reacts with hydroxide, forming carbonate in alkaline and neutral reactors. This work demonstrates that, in acidic conditions, a high CO2 utilization rate of 77% can be achieved by suppressing hydrogen evolution through the strategy of applying high concentration of surface alkali cations. In …
-
Extended oxygen delignification of high kappa softwood pulp in a flow-through reactor
… stage of Kraft cooking. Another was to keep the alkali concentration at a relatively low but constant level throughout the O-delignification stage to minimize the cellulose degradation during delignification. This was achieved by using a flow-through reactor (FT-R) configuration. A high degree of …
-
The compositional homogeneity of potash lime silica glasses in northern Europe from 12th-17th centuries.
… such as increased furnace temperature and a high alkali concentration in the ash, appear to be the dominating factors. The presence of large elemental variations in a number of the archaeological glasses analysed confirms that inhomogeneity is a vital consideration in compositional studies of this …
-
Effect of chemical admixtures on conductivity of mortars
… with results from calculating Na + and K + ion concentrations in the pore solution of mortars, measuring non-evaporable water content, gravimetric water porosity as well as conductivity of chemical admixtures. The water to cement ratios used were 0.485 and 0.35 with a sand to cement ratio fixed …
-
Microwave-assisted alkali pretreatment, densification and enzymatic hydrolysis of canola straw and oat hull
… investigated the effects of microwave-assisted alkali pretreatment, microwave pretreatment (distilled water) and untreated canola straw and oat hull on the pellet quality, and the conversion of microwave pretreated and alkali treated substrates into sugar for cellulosic bioethanol production. …
-
The Structure of Alkali Silicate Glasses and Melts: A Multi-spectroscopic Approach
The structure of alkali silicate glasses and melts is investigated using a multi-spectroscopic approach. Raman spectroscopy is used to characterize the local to intermediate range order within the glasses. We show that the distribution of rings varies as a function of composition, with 3-membered …
-
Impedance spectroscopy and NMR studies of fast ion conducting chalcogenide glasses
… model that predicts well the results for the low alkali glasses. a.c. conductivity is examined through the electrical modulus formalism and the Kohlrausch-Williams-Watts decay function. The first-ever compositional study of the approach to exponential relaxation with decreasing alkali …
-
Corrosion of reinforcement In alkali-activated materials
… of a category of alternative binders called alkali-activated binders, including materials described as geopolymers, which are produced by the reaction of solid precursors such as fly ash, slag, and metakaolin with alkaline solutions. As buildings and infrastructures are aging nowadays, the …
-
Metal oxide and silicate nanotubes: synthesis and hydrogen storage applications
… at 195ºC. It was shown that increasing the concentration of NaOH widens the length distribution and increases the average length of the nanotubes. Variable temperature experiments with vanadium oxide nanostructures revealed a low temperature route for the synthesis of flexible elongated VOx …
-
The Effects of Using Alkali-Silica Reaction Affected Recycled Concrete Aggregate in Hot Mix Asphalt
The effects of using alkali-silica reaction (ASR) affected recycled concrete aggregate (ASR-RCA) in hot mix asphalt (HMA) were investigated in this study. Dilatometer and modified beam tests were performed to determine the possibility of new ASR occurring in reactive aggregates within the HMA or …
-
Understanding the Role of Biomass and High Shear Bioreactor Parameters in Bioethanol Production
… steps, as are required in dilute acid and alkali pretreatment methods; in addition, no potential fermentation inhibitors were reported from earlier studies. A viable continuous pretreatment method might be found through extrusion. The hypothesis of this study is that high shear coupled with …
-
An experimental and simulation study of the effect of geochemical reactions on chemical flooding
… of any chemical flooding project, especially Alkali Surfactant Polymer (ASP) flooding is the cost of softening the injection brine to prevent the precipitation of the carbonates of the calcium and magnesium ions which are invariably present in the formation brine. Novel hardness tolerant …
Page 1 of 2