Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 21 for “"analysis of stresses"”.
-
Comparative Analysis of Stresses in a Building Frame
<p>The increase in the price of land in the cities has made it necessary to build high buildings in order to get a large commercial space on a small parcel of land. The type of building generally used is known as the steel skeleton building. In this type of building the live and dead loads, …
-
Analysis of Stresses in a Three Span Continuous Concrete Beam Bridge
… author was asked, "How far from the up- ports of a continuous-bean reinforced-concrete bridge should the reinforcing for negative moment extend into the spany." It was a simple question, and the reason for it being asked was that a particular structure, the one shown in the frontispiece, had …
-
Comparison between mathematical and model analysis of stresses in building frames
The first experiment consisted of the making and testing of a cardboard model of a beam fixed at both ends. The results obtained from the model compared very favorably with the mathematical solution as there was a variation of only 1.8 percent. The second experiment was performed with a cardboard …
-
Analysis of Stresses in Metal Sheathed Thermocouples in High-Temperature, Hypersonic Flows
… extremely well-developed sensors, the prediction of stresses (hoop, radial, and axial) within thermocouple sheaths for custom-configured probes remains a topic of great concern for ensuring adequate lifetime of sensors. In contemporary practice, high-fidelity simulations must be run to prove if a …
-
Micromechanical Analysis of Stresses and Instabilities in Wet Granular Materials: Homogenization and Discrete Element Approaches
This thesis presents the micromechanical analysis of wet granular material behavior within the pendular regime where particles are held by distinct liquid bridges through the action of capillarity and thin film adhesion. The presence of air and liquid phases within the pore space of solid particles …
-
A model analysis of stresses in the wall and floor of a cylindrical steel tank
The assumption of a fixed base condition for the analysis of wall stresses is justified only in the case of a rigid support, when the fixed-end moment is small. By evaluating the constants of the deflection equation for the wall at any given point, the variation of stress along the wall and the …
-
Analysis of stresses in pedestrian & utility bridge across Red Cedar river at Michigan state college
Thesis (B.S.)--Michigan State College of Agriculture and Applied Science, 1948
-
Stress Analysis by Photoelastic Methods
The object of this article is to point out how the principles of photo elasticity may be used as a basis for the analysis of stresses in machine parts. It is also to review the methods and demonstrate the procedure for the determination of the characteristics and values of stresses in the models of …
-
3-D finite element method for micromechanical analysis in fibrous composite material
The objective of this thesis was to study whether simplified three dimensional finite element models could be used as a micromechanical model for analysis of stresses at the fiber and matrix level while providing smeared composite properties for the global structural analysis. The mathematical …
-
Development, optimization and implementation of the design for a centrifugal reverse-osmosis desalination system
A new method of sea water desalination, Centrifugal Reverse-Osmosis (CRO), is developed from concept to patented design and functional prototype of capacity 11,355 litres of fresh water per day. CRO is shown to have significant benefits relative to the leading existing desalination technology, …
-
Optimization techniques for contact stress analysis.
The analysis of stresses induced by contact between two bodies is inherently difficult because the size of the contact zone is unknown and constantly changing throughout loading. To overcome these difficulties, two approximation methods have been developed to determine the magnitude of contact …
-
Nonlinear thermoelastic stress analysis of spherically curved solar panels
… solar collectors. These solar panels consist of thin flat glass plates bent to form a spherical surface, glued onto a paper honeycomb backing, and covered with steel plate at the back and with plastic strips on the sides. Stresses are produced in the glass plates as they are formed into …
-
The application of numerical methods for modelling the behaviour of discontinuous rock for mine design
The modem design of an open pit in a rock mass commonly depends on the numerical analysis of stresses and displacements adjacent to the proposed structure. Rock masses are different from other engineering materials due to the presence of discontinuities. This feature of rock masses requires …
-
Early age and time-dependent behaviour of ternary blends of high-performance concrete
… deformations. Motivated by broad adoption of low water-to-binder (w/b) concretes with supplementary cementitious materials (SCMs) such as silica fume and Class C fly ash, the work studies time dependent deformation and durability performance of concrete. Twenty-four mixes systematically …
-
Theoretical Analysis of Stress Generation and Volume Change In Lithium Ion and Lithium Thermal Batteries
… to improve the performance and stability of the lithium ion and other lithium based battery systems. In spite of commercial success, the technology still faces many critical safety and performance issues that need to be addressed. One of these issues is the mechanical degradation of the …
-
ELASTO-CAPILLARITY IN FIBROUS MATERIALS
Current advances in the manufacture of nanoporous and nanofibrous materials with high absorption capacity open up new opportunities for the development of fiber-based probes and sensors. Pore structures of these materials can be designed to provide high suction pressure and fast wicking. During …
-
Linear and non-linear finite element modeling of bone-implant system in uncemented total hip arthroplasty
… hip arthroplasty (THA) are complex and many of their effects unclear. Linear and non-linear models were developed to study effects of different factors involved in the bone-implant system. A three-dimensional (3D) unsymmetric beam model, based on a potential energy formulation, for the …
-
Longitudinal Shear Capacity of the Slabs of Composite Beams
No abstract is provided.
-
Geomechanical modeling of reservoir using finite element method
The importance of refracturing horizontal wells in low permeability reservoirs is well recognized in the oil and gas industry. As a result of production from a propped open fracture, the stress changes in the reservoir. However, the stress change is anisotropic. This change in stresses near the …
Page 1 of 2