Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 13 of 13 for “"and pore solution."”.
-
Pore Structure and Pore Solution in Alkali Activated Fly Ash Geopolymer Concrete and Its Effect on ASR of Aggregates with Wide Silicate Contents
… to strength loss, cracking, volume expansion, and premature failure of concrete structures. In essence, it is a particular chemical reaction involving alkali hydroxides and reactive form of silica present within the concrete mix. Geopolymer is a type of alkaline activated binder synthesized …
-
KINETIC-THERMODYNAMIC STUDY OF ALKALI-SILICA REACTION AND MULTI-PHYSICAL CHARACTERIZATION OF FORMED GEL IN CEMENTITIOUS MATERIALS
… threat to the concrete infrastructure durability and its damage mechanism has not been fully understood currently. This thesis investigated the ASR damage mechanism from the multi-physical and kinetic-thermodynamic prospect. The objective of this study is to characterize the chemical and …
-
Characterization of Cement Paste in Fresh State Using Electrical Resistivity Technique
… mixing before the setting time. The conductivity and pH of the pore solutions extracted from fresh cement paste mixtures was also determined. The conductivity of pore solution extracted from select hardened paste mixtures cured in sealed moisture condition was also obtained. These data were used …
-
The pore system and engineering properties of hardened cement paste
… to elucidate the relationships between the pore system and a number of engineering properties of hardened cement paste, particularly tensile strength and resistances to carbonation and ionic penetration. By examining aspects such as the rate of carbonisation, the pore size distribution, the …
-
Corrosion Performance of Carbon and Galvanized Steel in Calcium Silicate Cement
… concentrations being higher than ever, the solution is urgent. Due to this, a more sustainable type of concrete has been proposed.Calcium silicate cement (CSC) composed of essentially the same raw materials as ordinary portland cement (OPC) cures through the consumption of carbon dioxide …
-
Alkali-silica reactivity and ionic transport in mortar with hydrophobic inclusions.
… of hydrophobic materials to modify moisture and ionic transport pathways in cement mortars. The research employed a comprehensive three-objective experimental program using highly reactive aggregates and three hydrophobic materials: hexamethyldisilazane (HMDS)-treated fumed silica, …
-
Effect of Novel and Eco-friendly Titanomagnetite Nanoparticles on Mechanical and Microstructural Properties of Cementitious Mixtures
This thesis investigated the effect of novel and eco-friendly nano-sized titanomagnetite particles (NTG) on the mechanical and microstructural properties of cementitious mixtures (i.e., cement paste and mortar). The NTG was synthesised and fully characterised by X-ray diffraction (XRD), scanning …
-
The application of A.C. impedance spectroscopy on the durability of hydrated cement paste subjected to various environmental conditions.
… current ASTM methods may give unreliable results and are destructive to the structure. A relatively new and novel approach to evaluating the durability of concrete uses A. C. Impedance Spectroscopy (ACIS). Hydrated cement paste (hcp), mortar, brick and vycor glass were evaluated using ACIS during …
-
Decontamination of zinc-polluted kaolinite with electrokinetic process.
… process refers to movement of water, ions, and charged particles relative to one another under the action of an applied direct current electrical field. In this research electrokinetic experiments are conducted on saturated kaolinite specimens loaded with zinc to investigate the efficiency …
-
The coupled chemo-mechanical degradation of cement-based materials
… materials in contact with aggressive aqueous solutions, including the process of chemical reactions between cement constituents and pore solution with intruded ion spices, the subsequent variation of elastic moduli due to constituents transformation and the overall mechanical behaviour based …
-
Relationship between Microstructure, Durability and Performance of CEM X Composite Cements
… is one way of reducing the clinker factor, and hence emissions. Synergies between limestone and slag have been suggested to enhance the performance of such cement. The synergistic effect on mechanical performance has been ascribed to the carboalumination formation, which in turn prevents the …
-
An Analysis of the Factors Influencing Electrochemical Measurements of the Condition of Reinforcing Steel in Concrete Structures
… structures is being carried out increasingly and more regularly, both in the laboratory and in the field. It is important to have enough information about the factors that may affect these measurements. In this way, results obtained from different tests can be interpreted in more reliable …
-
Corrosion of Steel in Alkali-Activated Materials
… of a complex solid assemblage of iron oxides and hydroxides. When in service, the alkalinity of the pore solution in mild steel reinforced concretes needs to be sufficiently high (pH > 9-10) to ensure the stability of the passive film. Corrosion of the embedded steel reinforcement has been …