Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 63 for “"angle of rotation"”.
-
Employment of dual frequency excitation method to improve the accuracy of an optical current sensor, by measuring both current and temperature.
… relatively large current over a wide range of frequency band. They are also used as protective devices in the event a fault occurs due to a short circuit, in the power generation and distribution industries. The basic principal used in OCS is the Faraday effect. When a light guiding faraday …
-
A Comparison of Torsional Stress Properties of Three Different Nickel-Titanium Files with Similar Cross-Sectional Design
The purpose of this study was to compare the in vitro torsional stress characteristics of Twisted Files (SybronEndo, Orange, CA) with two milled files of similar cross section, EndoSequence (Brasseler USA, Savannah, GA) and ProFile Vortex (DENTSPLY Tulsa Dental, Tulsa, OK). Files of size 25/.06 and …
-
Unsymmetrical large deflections of an annular plate
… von Karman equations for large deflections of thin plates have been presented for annular plates under certain axisymmetric/loading conditions, little work has been done with unsymmetrical large deflections. In this investigation a systematic mathematical iteration technique is used to …
-
The effect of rotation on legibility of dot-matrix characters
… (clockwise or counterclockwise) and the angle of stimulus image rotation, and the target character's distance from the center of screen, which was also the center of rotation; the dependent variables were response time and response correctness. Significant effects were found in the angle …
-
Design and optimization of a three-fingered robot hand
… The following thesis introduces the concept of a threefingered robot hand and its driving mechanism. The hand includes two fingers and a thumb. Using the concept of “an under actuated system”, each finger consists of three revolute joints which are driven by two actuators and tooth belt …
-
Large Deflections of Helical Springs
The problem analyzed is that of a helical spring subjected to end couples and forces which produce large deflections of the spring. These deflections are such that the angle of rotation of one end of the spring centerline with respect to the other end of the spring centerline exceeds the range …
-
Testing the HG1700 inertial measurement unit for implementation into the AIRES unmanned underwater vehicle
… Inertial Measurement Unit (IMU) with an inherent rotation rate error bias of 10 degrees/hour. Then need for a more accurate IMU for long term missions has led to the purchase of the Honeywell HG1700 IMU. The HG1700 is a ring laser gyroscope designed specifically as part of the navigation software …
-
Use of NSM FRP for torsional strengthening on thin walled tubular RC structures
The use of near surface mounted (NSM) FRP reinforcement has been proven to be a very promising technique for the strengthening of reinforced concrete (RC) structures in both flexure and shear. The application of NSM FRP to improve the torsional performance of RC structures is limited, however, and …
-
Magnetic particle biosensors
With the discovery of the GMR effect in the mid 1980s, magnetic sensing has emerged as having great potential of being a highly sensitive biosensor. We hence used this method to undertake systematic studies on the response of a MR sensor to a single ferromagnetic or paramagnetic particle. Spin …
-
Fingerprint testing protocols for optical sensors
Currently there is a variety of conflicting and contradictory testing protocols for biometric technologies. There is currently no biometrics testing standard, which allows vendors to skew their test results in their favor. The research discussed in this thesis aims to address these issues by …
-
Frequency-domain range data registration for three-dimensional space modeling in robotic applications
… thesis does not require an initial estimation of the transformation, and avoids problems of the classical iterative techniques by employing the multi-dimensional Fourier transform, which decouples the estimation of rotational parameters from the estimation of the translational parameters. Using …
-
Rotation Correction for License Plate Recognition
The focus of this thesis is on reliable and robust license plate recognition (LPR). The technology is currently in operation that both the quantity and quality-based approaches are needed. The entire procedure of license plate recognition consists of six steps: (1) image acquisition, (2) image …
-
Regimųjų vaizdų pasukimo mintyse tyrimas, pateikiant juos vienu metu ir nuosekliai /
The purpose of this study was to examine mental rotation of simultaneously and successively presented figures. 32 students performed same – different task in which the pairs of the same or different irregular polygons were presented simultaneously and successively or vice versa. Stimuli were …
-
Distribution of Holonomy about Closed Geodesics on Compact Hyperbolic 3-Manifolds
An important feature of compact hyperbolic 3-manifolds is their closed geodesics, which have both geometric and dynamical implications. These geodesics are parametrized by their length and holonomy, which describes the angle of rotation by parallel transport about the geodesic. First, we prove …
-
Modelos para forças de soldagem por atrito-mistura (FSW) com ferramenta de perfil quadrado
… to large forces. FSW tools with square pin profile are known to produce defect free welds; however, no force models are available for this tool geometry. In this paper, FSW force models are developed using different methodologies, presented in two parts, namely: welding and transverse force …
-
Motion sickness during low frequency lateral and roll motions in isolation and in combination: Effect of visual conditions with/without VR HMD device
… has been a common issue that impacts the comfort of passengers in road transport due to exposure to low frequencies of horizontal and rotational motions. Previous work found that exposure to lateral and roll motions in isolation and in combination can cause motion sickness in road transport; …
-
Interface circuits for readout and control of a micro-hemispherical resonating gyroscope
… are inertial sensors that measure the rate or angle of rotation. One of the most promising technologies for reaching a high-performance MEMS gyroscope has been development of the micro-hemispherical shell resonator. (μHSR) This thesis presents the electronic control and read-out interface that …
-
Perceptual and comparative analyses of a passive, linear, multiple degree-of-freedom skin stretch device for proprioceptive substitution
… that this device can provide multiple degree-of-freedom proprioceptive information about a myoelectric prosthetic hand during grasping. The device consists of three plastic contact pads that are adhered to the skin on the glabrous forearm and that are each attached by a wire to the …
-
Using a Computer Model to Study the Force Distribution on the Root of the Maxillary Central Incisor
A computer model of a human maxillary central incisor was devised to predict the momentary center of rotation of a tooth when a force was applied to the crown. The root of a tooth was divided up into a series of small segments to simulate the resisting forces set up along the root by the …
-
Torsional Analysis of Core Structures in Tall Buildings
A folded plate analysis of the behaviour of core structures subjected to torsional loading is presented. In this method the core is assumed to consist of vertical plates rigidly connected together along their edges, and by using the engineering theory of bending in conjunction with the continuous …
Page 1 of 4