Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 60 for “"anisotropic etching"”.
-
Anisotropic etching for silicon micromachining
… or on silicon wafers. One of these processes is anisotropic etching, which utilizes etchants such as KOH and ethylene diamine pyrocatechol (EDP) to fabricate structures from the wafer bulk. This project is a study of the use of KOH to anisotropically etch (lOO)-oriented silicon wafers. The thesis …
-
Anisotropic Etching of Monocrystalline Silicon Under Subcritical Conditions
… systems, and photovoltaic cells. Wet etching of silicon is a fabrication strategy shared by these three applications. Processing of silicon requires large amounts of water, often involving dangerous and environmentally hazardous chemicals. Yet, minimal knowledge is available on the …
-
Atomistic modelling of anisotropic etching of crystalline silicon
An atomistic model for the simulation of anisotropic wet chemical etching of crystalline silicon is developed. Special attention is paid to the relation between the atomistic processes, the mesoscopic features of the surface morphology and the macroscopic anisotropy of the process, bridging the …
-
Anisotropic Etching Of Si(100) In Aqueous Solutions
… produce atomically flat Si(100) surfaces by anisotropic etching. This dissertation shows that near-atomically-flat Si(100) surfaces can be produced by an aqueous silicon etchant - 40% NH4F (aq.). The etching of Si(100) in 40% NH4F (aq.) produced H2 bubbles as a reaction product, which led to …
-
Mechanism of wet anisotropic etching of silicon for nano-scale applications
… of recent MEMS devices require the use of anisotropic etching and variety of concave structures. Analysis of these structures uncovered phenomenon in the etch rates of surfaces exposed by anisotropic etchant. This phenomenon could not be explained without consideration of the composition of …
-
Experimental investigation of anisotropic etching of silicon in tetra-methyl ammonium hydroxide
Anisotropic etching of silicon is of such fundamental importance in silicon micromachining that it has been studied and continues to be studied by many researchers. Yet, even with all the attention that it has received, there remain many difficulties, such as toxicity of the most commonly-used …
-
Fabrication of silicon nanowires with controlled nano-scale shapes using wet anisotropic etching
… features into functional device layers requires anisotropic etch techniques. Dry reactive ion etch techniques are commonly used since most solution-based wet etch processes lack anisotropic pattern transfer capability. However, in silicon, anisotropic wet etch processes are available for the …
-
Fabrication of High Solid Silicon Microneedles Based on Anisotropic Etching by Potassium Hydroxide
… silicon microneedles fabrication based on KOH anisotropic etching, aiming at finding a controllable way to fabricate 500 μm high microneedles with good height uniformity and tip sharpness. During this research, 200nm low-stress LPCVD SiNx is used as KOH etching mask; mask shape is square-shaped …
-
An investigation of anisotropic etching of silicon in an electron cyclotron resonance plasma
Thesis (M.S.)--Michigan State University. Department of Electrical Engineering, 1991
-
Experimental investigation and modeling of anisotropic etching of silicon in tetra-methyl ammonium hydroxide
Anisotropic etching of silicon is a fundamental process in micro-systems technology (MST) and in the fabrication of micro-electromechanical systems (MEMS). This work addresses the fundamental atomic mechanisms of anisotropic etching of single-crystal silicon, by wagon-wheel-based under-etch …
-
Development of a HBr-Based ICP-RIE Process for Smooth and Anisotropic Etching of III–V Semiconductors
This thesis presents the development of a dry etching recipe using hydrogen bromide (HBr) for the fabrication of InP/InGaAs-based heterostructures. The recipe aims to replace a methane-based process to avoid chamber contamination while maintaining a highly directional etch profiles and smooth …
-
Modelling of anisotropic etching of silicon in tetra-methyl ammonium hydroxide : anomalies due to facet boundary effects
Anisotropic etching of silicon is one of the fundamental techniques for the fabrication of micromachined structures such as microsensors and microactuators. Although the technique is used extensively in industry, the fundamentals of the atomic etching mechanism are still not well understood. This …
-
Investigation of diamond etching by a microwave plasma-assisted system
ABSTRACTINVESTIGATION OF DIAMOND ETCHING BY A MICROWAVE PLASMA-ASSISTED SYSTEMByDzung Tri TranDiamond deposition technology advances have opened several potential applications for diamond-based devices and components. Many diamond applications, such as micro-electro-mechanical systems (MEMS) …
-
KOH anisotropic silicon etching for MEMS accelerometer fabrication
… guidebook for processing crystalline silicon by anisotropic potassium hydroxide (KOH) wet etching. In low cost bulk micromachining of silicon for MEMS (Micro Electro Mechanical Systems), anisotropic wet etching of single crystalline silicon in aqueous KOH solutions is a technically important …
-
A Study of Novel Fabrication Techniques for Development of 3-D Silicon Nano-structure Array
… 1) patterning of silicon surface in TMAH using anisotropic etching technique, 2) formation of porous layer on patterned silicon surface using electrochemical anodic etching, and 3) treatment of porous silicon layer using an alkaline etching to reveal the silicon nano-structure array. The second …
-
Etching of Silicon, Silicon Nitride, and Atomic Layer Etching of Silicon Dioxide using Inductively Coupled Plasma Beams
Selective, anisotropic etching of silicon nitride (SiN) over Si or SiO2 is vital for fin field-effect transistor (FinFET) fabrication. Anisotropic etching with high selectivity of SiN over Si, and moderate selectivity over SiO2, can be achieved by ion-assisted etching using hydrofluorocarbon gases, …
-
FABRICATION OF ISOLATED SILICON ISLANDS BY TMAH ETCHING
… (TMAH), a chemical etchant which etches silicon anisotropically is used for releasing the structures. A Titanium meander line resistor is fabricated on the isolated structure to study the viability of the process. Structures released are of sizes 10x10 µm2 , 20x20 µm2 and 40x40 µm2 supported on …
-
Design, Fabrication, Modeling and Characterization of Electrostatically-Actuated Silicon Membranes
… etched into a silicon wafer using a wet anisotropic etching process. These flexible membranes were bonded to a rigid counterelectrode using a photo-patterned gap layer. The membranes were actuated electrostatically by applying a voltage bias across the electrode gap formed by the membrane …
-
Ultrathin mono-crystalline silicon photovoltaic cells with mechanically flexible and stretchable designs, and light-trapping structures
… stretchable, and semitransparent, formed by anisotropic etching of bulk wafers and integrated onto unusual substrates.
-
FABRICATION METHODOLOGIES FOR INTEGRATED PHOTONIC DEVICES IN LITHIUM NIOBATE
… attempt to develop novel devices based on deep anisotropic ridges and photonic crystals. Detailed examination of ICP etching characterizations of LiNbO3 showed that deep and highly anisotropic etching with an ultra-smooth surface can be achieved in a single-step run. Then we demonstrated a …
Page 1 of 3