Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 440 for “"anneal"”.
-
Temperature control and measurement in spike anneal
Device scaling beyond O.IO um technologies is severely restricted by the lack of any "manufacturable" solutions to activate the implanted species in Ultra Shallow junctions (USJ). The hardware and process modifications were directed to improve the spike sharpness. Different designs for the edge …
-
Oriented single copper fibers by a strain-anneal technique
A vacuum furnace for high temperature anneal of metal fibers with a moving gradient was designed and constructed. The design specifications are detailed. Systematic evaluation of the variables governing the longitudinal crystal growth of individual copper crystals in a 16 mil fiber was carried out. …
-
Growth of single crystals of iron by the strain-anneal method
Includes bibliographical references (page 30).
-
The Formation of Silicon Nanoparticles on Silicon-on-insulator Substrate by Thermal Anneal
… process versus the temperature of the thermal anneal, the thickness of the top silicon layer and we determined the variation of the particle size distribution with these parameters. The post-anneal substrate morphology is studied using ex situ atomic force microscopy (AFM). It was found that …
-
The Effect of Hydrostatic Pressure on The Anneal of Quenched - in Vacancies in Gold
Made available in DSpace on 2015-05-12T17:12:16Z (GMT). No. of bitstreams: 2 license.txt: 4848 bytes, checksum: 96035ab3f5e1c23cc7138a224ce498bd (MD5) 6003910.PDF: 4137916 bytes, checksum: fe0ba5d93936777054c0a87c624d1eb1 (MD5) Previous issue date: 1960
-
Investigation on Sputter Ambient Oxygen Partial Pressure and Anneal Conditions on the Operation of Indium-Tungsten-Oxide Thin-Film Transistors
… partial pressure during the film deposition, anneal temperature, time, and ambient conditions on TFT performance. Bottom-gate unpassivated TFTs were fabricated with a 30 nm IWO film on a 6” silicon wafer with 650 nm isolation and 100 nm gate dielectric. Oxygen partial pressures (PO2) ranging …
-
Design, construction and testing of a high-vacuum anneal chamber for in-situ crystallisation of silicon thin-film solar cells
… crystallised at ~600°C over hours. During this anneal at atmospheric pressure -depending on the properties of the amorphous silicon film- ambient gas can percolate the film and can negatively affect the crystallisation. In this work, a high-vacuum anneal chamber was designed and built to allow …
-
Electrical Properties of Gallium Arsenide Doubly Implanted with Germanium and Gallium
… have been found to depend critically on anneal temperature and ion dose. At low doses (<1 X 1014 ions/cm2 ) Ge-implants exhibit p-type activity at anneal temperatures 700°C through 950°C, and at high doses (>1 X 1015 ions/cm2 ) the implants are n-type in the same temperature range. The …
-
A comprehensive study of 3D nano structures characteristics and novel devices
… work, we have studied the effects of hydrogen anneal on the structural and electrical characteristics of silicon fin based devices: tri-gate, finFET to name a few. H₂ anneal is shown to play a major role in structural integrity and manufacturability of 3D fin structure which is the most …
-
Annealing of GaA1As double heterostructures with homogeneous ruby laser light
… a ruby laser was homogenized, and used to laser anneal the active layer of GaA1As double heterostructure wafers in an attempt to improve the radiative efficiency of the active layer. At anneal energies exceeding the estimated threshold for melting of the active layer, the radiative efficiency was …
-
SOLID SOURCE CHEMICAL VAPOR DEPOSITION OF REFRACTORY METAL SILICIDES FOR VLSI INTERCONNECTS.
… and can be crystallized in subsequent anneal steps with anneal induced film shrinkage of less than 12 percent. Surface oxide formation is possible during this anneal cycle. Auger spectroscopy and Rutherford backscattering results indicate that silicon-rich films can be deposited, and …
-
Characterization of Graphene Films Grown on Cu-Ni Foil by XPS and LEED
… were performed on the Cu-Ni foil before anneal, after anneal in H2, and after growth of graphene in a CH4 environment. XPS measurements were made at both normal emission, and at an exit angle of 50º to enhance the surface sensitivity. Before anneal, the measurements indicate that the …
-
Characterization of indium phosphide and indium gallium arsenic phosphide grown by helium-plasma-assisted GSMBE
… were characterized under various doping and anneal conditions using Hall effect measurements, temperature-dependent resistivity studies, positron annihilation spectroscopy, photoluminescence and SIMS analysis. Undoped He-InP was weakly n-type as-grown, with a carrier concentration much lower …
-
Laser engineering of defects in diamond for quantum technologies
… accuracy is held back by the need to thermally anneal the diamond within a furnace to convert laser generated defects into colour centres; a fabrication step in which there is little to no control over individual site [6]. In this thesis, the ultra-fast pulsed laser writing technique is broached …
-
Material processing of quantum well infrared photodetectors
… characterization of furnace and rapid thermally annealed (RTA) GaAs/AlGaAs multiple quantum well (MQW) infrared (IR) photodetectors (QWIPs) epitaxially grown on GaAs and Si substrates is presented. The advances in epitaxial growth allow the precise control of the dimensions, doping, and matrix …
-
Effect of cold working and annealing on mechanical properties, microstructure, and texturing of aluminum alloy 3104
… and texturing as a function of cold working and annealing in aluminum alloy 3104 have been examined. The material used in this research was heavy gauge (>0.150 in.) can stock in the hot rolled condition. A two hour annealing treatment at 332 °C (630 °F) was given in which the heat-up rate was 13 …
-
Heating it up: a novel approach to annealing soluble organic semiconductors
… to crystallising TES-ADT films, namely a thermal anneal process. It involves heating the film to a temperature between 70 to 130 degrees (C), but less than the melting point of 154 degrees (C), obviating the need for the solvent anneal process. FET characteristics are obtained, with mobilities up …
Page 1 of 22