Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 197 for “"applied strain"”.
-
UNDERSTANDING THE ELECTRICAL RESPONSE TO APPLIED STRAIN OF POLYMER SUPPORTED SCREEN PRINTED INKS
… silver-filled polymer inks subjected to uniaxial strain. This work begins by exploring conductivity of two inks with similar flake volume fractions of ~50% that are screen-printed with a single pass (thickness: 10 m) onto three different polymer substrates. The normalized resistance increases …
-
Developing a FRET tension sensor-compatible system for analyzing cardiomyocyte tension alongside applied strain
… but are limited when it comes to externally applied forces. The goal of this project is to design a system capable of measuring intracellular tensile forces when applying an external strain, comprised of two parts. First, by culturing cardiomyocytes derived from a cell line expressing a FRET …
-
The Effects of Applied Strain and Heat Treatment on the Properties of NiTi Wire During Shape Setting
… This study investigates the effects of applied strain of 0-10% and heat treatments of 300-600ºC for times of 2-30 minutes during shape-setting of Ti–50.8 at% Ni wire with a nominal diameter of 0.495 mm and an initial transition temperature, Af, of 12ºC. Strain was applied prior to heat …
-
Numerical study of solder joint failure under fast loading conditions
… is devoted to deformation under relative high strain rates (1-100 s-1), mimicking those frequently encountered in drop and impact loading of the solder points. The effects of applied strain rate and loading mode on the overall ductility and failure pattern were specifically investigated. It was …
-
Thermal heat transport characterization for macroscale, microscale, and nanoscale heat conduction
… Second, the in°uence of external mechanical strain on the thermal conductivity of single-wall carbon nan- otubes is studied using direct molecular dynamics simulations with Terso®-Brenner potential for C-C interactions. Three types of external mechanical strain, namely, axial compression, …
-
Effects of Strain Induced Topological Changes on the Superconducting Critical Temperature
… investigation into the effects of<br/>external strain on superconductivity. This effect is explored for various gap pairings, for<br/>superconductors that can be modelled on a square lattice. Using some general predictions of<br/>group theory and a microscopic negative-U Hubbard model, the …
-
Applied Mechanical Tensile Strain Effects on Silicon Bipolar and Silicon-Germanium Heterojunction Bipolar Devices
… investigates the effects of post-fabrication applied mechanical tensile strain on Silicon (Si) Bipolar Junction Transistor (BJT) and Silicon-Germanium (SiGe) Heterojunction Bipolar Transistor (HBT) devices. Applied strain effects on MOSFET transistors are being heavily explored, both in …
-
Degradation studies of flexible optoelectronic device electrodes
… element modeling is used to simulate the stress/strain distribution of the electrodes under various deformation modes. The effects and synergies of corrosion, applied strain, film thickness, and number of bending cycles on the electrical and structural integrity of the electrodes are investigated …
-
Deformation, yield, relaxation and recovery in partially processed leather
… in uniaxial tests by measuring the stress-strain relationship, the immediate and recovered set and stress relaxation. The influence of moisture content, time under strain and applied strain were determined. The effect of drying under strain was also explored. Results were interpreted using …
-
Theory of near infra-red germanium lasers
… can be engineered using biaxial or uniaxial strain in order to achieve optical gain. Recently, both optically pumped and electrical injection pumped lasing have been reported in Ge-on-Si devices. This work aims to perform gain modeling in a germanium laser grown on a silicon substrate which …
-
Multiscale Modeling of CNT-Polymer Nanocomposites and Fuzzy Fiber Reinforced Polymer Composites for Strain and Damage Sensing
… effect, that is to say that changes in applied strain may induce measurable changes in resistance. The first focus of the work is on modeling the piezoresistive response of the CNT-polymer nanocomposites by using computational micromechanics techniques based on finite element analysis. …
-
Ferroelectric Barium Titanate Nanowires: Synthesis, Properties, and Device Applications
… by a periodically varying tensile mechanical strain applied with a precision mechanical testing stage. The measured voltage generation from the nanowire was found to be directly proportional to the applied strain rate, and was successfully modeled through consideration of an equivalent circuit …
-
The Effect of Local Conditions on Deformation Processes in Low Stacking -Fault Energy FCC Alloys
… at room temperature under quasi-static and high strain rate compression. Post-mortem analysis of the deformed microstructures at different levels of applied strain reveals the nucleation of deformation twins is affected by the grain size distribution of the bulk material. In these materials, …
-
Modeling microstructurally small crack growth in Al 7075-T6
… growth under a variety of loading conditions and applied strain ratios, including uniaxial tension-compression and simple shear at a range of applied strain amplitudes. Results from the model are compared to experimental results obtained by other researchers under similar loading conditions. A …
-
Plastic deformation of gallium arsenide
… of temperature induced effects to the plastic strain rate . The dislocation densities in the deformed samples obtained by counting dislocation etch pits indicate that the density of dislocations in deformed GaAs is directly related to the applied stress, the plastic strain rate, the test …
-
Neural network demodulator for optical Bragg strain sensors
… wavelength defined by grating parameters. As strain sensors, Bragg gratings provide an absolute measure of strain and have excellent multiplexing capability. The change in the output of a Bragg grating for applied strain is characterized by a linear shift the Bragg grating center wavelength. …
-
Raman spectroscopy: from ferroelastic domain identification to strain tuning
… by epitaxially, mechanically or piezoeletrically applied strain. Methods for quantitative determination of strain by Raman spectroscopy are proposed for some materials such as BiFeO3 or strained Si. Raman spectroscopy was also used for understanding temperature induced phase transitions or orbital …
-
Second order nonlinearities in silicon photonics
… waveguides are studied. At the beginning, the strained silicon platform is investigated in detail. In recent years, second order nonlinearities have been demonstrated on this platform. However, the origin of these nonlinearities was not clear. This thesis offers a clear answer to this question, …
-
Relaxation processes in Cu-Zr metallic glasses by molecular dynamics simulations
… takes place when this material is under constant strain. The study comprises a thorough analysis of the thermodynamics, structural and dynamical properties of this system. We found a rattling mode of atomic motions that takes place in highly localized regions characterized by their high mobility …
Page 1 of 10