Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 28 for “"areal capacitance"”.

  1. Studies of Cobalt and Iron Oxides/Oxyhydroxides Nanostructures for Electrochemical Applications

    … exhibited significantly better electrochemical capacitance and rate capability than Co3O4 electrode. CoOOH electrode was applied as electrochemical sensors to detect glucose, hydrogen peroxide and hydrazine. A novel nanocomposite was fabricated by coupling a-Fe2O3 nanotubes and reduced graphene …

    nus Repository record for Studies of Cobalt and Iron Oxides/Oxyhydroxides Nanostructures for Electrochemical Applications (opens in a new tab) Download file for Studies of Cobalt and Iron Oxides/Oxyhydroxides Nanostructures for Electrochemical Applications (opens in a new tab)

  2. DEVELOPMENT/INVESTIGATION ON ADVANCED Ni/Co BASED PSEUDOACTIVE ELECTRODES FOR NEXT-GENERATION HIGH ENERGY DENSITY SUPERCAPACITORS

    … throughout the electrode, achieving an ultrahigh areal capacitance of 8.66 F cm-2. Second, Ni-Co oxides with multiple morphologies are successfully synthesized using NF substrate directly as Ni precursor. Benefiting from the fine morphologies, the composites exhibit a super-high areal capacitance …

    nus Repository record for DEVELOPMENT/INVESTIGATION ON ADVANCED Ni/Co BASED PSEUDOACTIVE ELECTRODES FOR NEXT-GENERATION HIGH ENERGY DENSITY SUPERCAPACITORS (opens in a new tab) Download file for DEVELOPMENT/INVESTIGATION ON ADVANCED Ni/Co BASED PSEUDOACTIVE ELECTRODES FOR NEXT-GENERATION HIGH ENERGY DENSITY SUPERCAPACITORS (opens in a new tab)

  3. In-situ synthesis of NiMoO4 on Ni foam as a binder-free electrode for supercapacitor

    … with 0.005 M H2MoO4 for 80 hours. The maximum areal capacitance can reach 0.724 F/cm2 followed with outstanding rate capability (70.1% capacitance retention when current density increase from 1 mA/cm2 to 10 mA/cm2). The excellent areal capacitance and rate capability may be attributed to its …

    mtu Repository record for In-situ synthesis of NiMoO4 on Ni foam as a binder-free electrode for supercapacitor (opens in a new tab)

  4. Polypyrrole-Graphene based Flexible Supercapacitors

    … supercapacitor applications due to their high areal/specific capacitance, energy density and low cost, but they suffer from poor cycling stability. Herein, reduced graphene oxide has been combined with polypyrrole to obtain an optimized electrode configuration with good cycling stability and …

    waterloo Repository record for Polypyrrole-Graphene based Flexible Supercapacitors (opens in a new tab)

  5. Advanced materials and colloidal fabrication strategies for supercapacitor anodes

    … redox activity and ferrimagnetic behavior, with areal capacitance values reaching up to 4.49 F·cm⁻². To overcome the inherent low conductivity of transition metal oxides, multiwalled carbon nanotubes (MWCNTs) were incorporated, and high-energy ball milling (HEBM) was employed to eliminate …

    mcmaster Repository record for Advanced materials and colloidal fabrication strategies for supercapacitor anodes (opens in a new tab)

  6. Electrospun PEDOT:PSS Electrolytic Capacitors Electrodes for Microelectronic Energy Storage

    … dominates up to 1.1 V with a maximum achieved areal capacitance and energy storage of 5.25 mF/cm2

    carleton Repository record for Electrospun PEDOT:PSS Electrolytic Capacitors Electrodes for Microelectronic Energy Storage (opens in a new tab)

  7. Metal-reduced graphene oxide for supercapacitors and alternating current line-filters

    … the role benzene derivatives play in the capacitance enhancement of graphene-based supercapacitors. The main reason is attributed to the pseudocapacitance of the aromatic molecules rather than the former one. Meanwhile, we find that the para and ortho substituted benzene derivatives …

    gatech Repository record for Metal-reduced graphene oxide for supercapacitors and alternating current line-filters (opens in a new tab)

  8. GRAPHENE ELECTRODES FOR SUPERCAPACITORS AND CAPACITIVE DEIONIZATION

    … high conductivity, and theoretical gravimetric capacitance of 526 F/g, attracts great attention in EDLCs. Meanwhile, practical application requires graphene electrodes with a mass loading up to 10 mg/cm2 or thickness of 200 µm and prefers well-balanced gravimetric/areal/volumetric capacitances. …

    mtu Repository record for GRAPHENE ELECTRODES FOR SUPERCAPACITORS AND CAPACITIVE DEIONIZATION (opens in a new tab)

  9. Synthesis and Fabrication of Graphene/Conducting Polymer/Metal Oxide Nanocomposite Materials for Supercapacitor Applications

    … materials that can increase the specific capacitance and energy density of supercapacitors. Additionally, certain types of supercapacitor electrode materials store the charges at the electrode/electrolyte interface preventing any deformation of the material and thus increasing its cycle …

    usf Repository record for Synthesis and Fabrication of Graphene/Conducting Polymer/Metal Oxide Nanocomposite Materials for Supercapacitor Applications (opens in a new tab)

  10. Thermally Chargeable Supercapacitor with Charging and Discharging Cycles for Wearable and IoT Electronics

    … chargeable supercapacitor (TCSC) which has good areal capacitance of 14.58 mF/cm^2 and charge storage capability in conjunction with a spiral bimetal coil and heat source to create an in-situ thermal cycling setup modeling real world application. The thermally chargeable supercapacitor (TCSC) has …

    tamu Repository record for Thermally Chargeable Supercapacitor with Charging and Discharging Cycles for Wearable and IoT Electronics (opens in a new tab)

  11. Advanced Charge-Storage Materials for Supercapacitor Applications

    … due to its arsenal of advantages, such as high capacitance, low cost, natural abundance, and environmental benignity. However, its low conductivity has hindered its adoption into real-life applications. Compositing MnO2 with conductive additives has proved to be a promising route for the …

    mcmaster Repository record for Advanced Charge-Storage Materials for Supercapacitor Applications (opens in a new tab)

  12. Integrated Micro-Supercapacitor: Design, Fabrication, and Functionalization

    … Such tubular device also exhibits excellent areal capacitance, and an improved cycling stability compared to that of planar MSCs. The third part introduces the step-by-step experiments towards the fabrication and optimization of inorganic strained layer-based tubular MSC. Al2O3/Ni/Cr/Al2O3 …

    qucosa-diss

  13. Nano-engineering and Simulating Electrostatic Capacitors for Electrical Energy Storage

    … layers has shown significant improvements in areal capacitance. However, sharp asperities inherent to the initial nano-template localized electric fields and caused premature (low field) breakdown, limiting the possible energy density (E = ½ CV<super>2</super>/m). A nanoengineering strategy …

    maryland Repository record for Nano-engineering and Simulating Electrostatic Capacitors for Electrical Energy Storage (opens in a new tab)

  14. 3D-printed flexible energy storage for soft robotics

    … flexible energy storage device presents an areal capacitance of 2.3 F cm-2, excellent cycling stability (97% retention after 10.000 cycles). Also the developed supercapacitor prototype can deliver a high energy density of 0.21 mWh cm-2 and a maximum power density of 39 mW cm-2 making it …

    bristol Repository record for 3D-printed flexible energy storage for soft robotics (opens in a new tab) Download PDF for 3D-printed flexible energy storage for soft robotics (opens in a new tab)

  15. Functionalized graphene materials for high performance supercapacitors

    … improved electrochemical properties with high capacitance, large energy and power densities, and long-term cycling stability. Moving from material design to device fabrication, micro-supercapacitors (MSCs), as miniaturized energy storage units, have been developed using highly conductive and …

    gatech Repository record for Functionalized graphene materials for high performance supercapacitors (opens in a new tab)

  16. Layered Conductive Polymer-Inorganic Anion Network for Electrochemical Capacitor: Synthesis, Mechanism and Performance

    … because of their unique intercalation capacitance mechanism. This mechanism can be seen as a combination of bulk phase charge storage and fast ion diffusion, offering both high energy and power density. Therefore, layered materials possessing intercalation capacitance are promising …

    unsw Repository record for Layered Conductive Polymer-Inorganic Anion Network for Electrochemical Capacitor: Synthesis, Mechanism and Performance (opens in a new tab)

  17. Structural Composite Supercapacitors using Epoxy-based Electrolyte and Carbon Fibre-based Electrode

    … supercapacitors to achieve a 3-fold increase in areal capacitance without deterioration of the mechanical properties. Finally, potential opportunities for future studies of the structural composite supercapacitors are discussed.

    unsw Repository record for Structural Composite Supercapacitors using Epoxy-based Electrolyte and Carbon Fibre-based Electrode (opens in a new tab)

  18. Three-dimensional Nanomaterials for Supercapacitor Applications: From Metal Oxides to Metal Phosphides

    … of several nanomaterials, in particular, pseudocapacitance materials such as metal oxides and metal phosphides, on both positive and negative electrodes, as well as the ASC design and fabrication. First, three-dimensional TiO2 nanorod arrays have been synthesized on Ti substrate by a facile …

    uno Repository record for Three-dimensional Nanomaterials for Supercapacitor Applications: From Metal Oxides to Metal Phosphides (opens in a new tab)

Page 1 of 2