Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 38 for “"artificial ageing"”.
-
Influence of Cu content on the artificial ageing response of Al-Mg-Si-Cu alloys
… response of Al-Mg-Si-Cu alloy during artificial ageing. In this study, four alloys with different Cu contents (0-0.9wt%) and two different initial microstructures (unrecrystallized and recrystallized) were examined. The alloys were all solution treated at 550 °C for 5 minutes and then …
-
Microstructure-property models for heat treatment of A356 aluminum alloy
… were; solution treatment at 500-560°C, natural ageing at room temperature, and artificial ageing at 150-200°C. The changes in dendritic composition and eutectic morphology due to solution treatment were quantified by microprobe and image analysis for a wide range of processing conditions. …
-
Effect of Ageing Heat Treatment on the Hardness and Tensile Properties of Aluminum A356.2 Casting Alloy
… temperature for about 8 to 10 hours followed by artificial ageing at around 155<sup>◦</sup>C for about 6 to 10 hours. This T6 temper treatment process has been followed for many years and adopted from the 6xxx series Al wrought alloy where the strengthening precipitate is Mg<sub>2</sub>Si as …
-
Investigation into Impact of Ageing on Rubber Component in Used Engine Mount
… placed on to products’ lifetime performance. Ageing of rubber components in the engine mount was known to be one of the key elements related to the compromised driving experience in used vehicles. This thesis will investigate how the properties of the rubber component change, and why. Links …
-
Influence of chewing force, thermal cycling and storage time on the retrievability of cemented implant retained crowns
… implant-retained crowns correlate when using artificial ageing. Hundred and twenty- eight crowns were fabricated from a Co-Cr alloy for 128 tapered titanium abutments.
-
Evaluation of marginal integrity of non invasive veneers: in vitro and in vivo study
… minimally invasive laminate veneers under ageing factors using two different types of ceramic materials.For the purposes of the in vitro part of the study, eighty (80) intact maxillary and mandibular frontal teeth were collected. The samples were randomly divided into four (4) groups, FNI, …
-
The effect of pre-deformation on the ageing behavior of 7030.60 and 7108.72 alloys
… treatment and water quenching, followed by a T6 ageing process. Due to the specific shape of the bumper product, the forming process introduces a heterogeneous distribution of deformation in the bumper. A systematic investigation of pre-deformation on the ageing behaviour of these alloys has been …
-
A New Crystal Plasticity Framework to Simulate Plastic Deformation Phenomena in Precipitation Hardened Aluminum Alloys
… model is introduced to predict the effects of artificial ageing on the alloy’s mechanical properties. In this model, the effect of the precipitate distribution is incorporated via two mechanisms. First, the reduction in the dislocation mean-free path is captured using a yield strength model …
-
Διερεύνηση των επιδράσεων του περιβάλλοντος Μουσείων και Βιβλιοθηκών σε έργα από περγαμηνή
… were investigated. The study employed both artificial ageing (in vitro) and natural ageing of parchment samples in real museum environments (in vivo). The methodology of such an approach was carried out for the first time on an international scale.Accelerated (artificial) ageing was carried …
-
The production of metal matrix composites using the stir casting technique
… heat treated by precipitation hardening with T6 artificial ageing. It was found that the both increasing the silicon carbide content, and T6 artificial treatment increase the mechanical properties such as hardness and tensile strength of the matrix alloy. Charactenzation of the MMCs produced …
-
Understanding the long-term evolution of C-S-H phases present in cement backfills
… of C-S-H phases due to leaching and hydrothermal ageing. Single phase synthetic C-S-H phases without the use of C3S or alkalis are synthesized via various methods with high Ca/Si ratios in the range 1.5 – 2.0 and analysed using techniques like NMR, TEM – EDX, STA and XRD to understand the …
-
Eero Aarnio's Globe : a platform for an investigation of challenges and possibilities related to the conservation of twentieth century foam upholstered furniture
… tests (peel and stress rupture tests, plus artificial ageing), designed to test the viability of the recommendation and carried out on 475 samples of naturally aged upholstery foam and fabric from a 1960s <i>Ball</i> chair, are presented. The tests results indicated that a new technical …
-
Thermal Contact Resistance Modeling in AA7075 Hot Stamping
… as it affects precipitation kinetics after artificial ageing of part formed, which in turn determines the final in-service mechanical properties and corrosion performance of part. Thermal contact resistance (TCR) between two solid surfaces is the main parameter that controls heat transfer …
-
Structure, Strength, Ductility in Aluminum Alloys: Constitutive Relations Analysis for Performance Evaluation
… dislocations changes the diffusion kinetics of artificial ageing. If the quench-sensitivity effect remained after TMP, higher temperature annealing at 230°C was found to improve ductility, and is believed to be due to precipitation of Al6Fe into the grain boundaries. The balanced biaxial …
-
Germination responses of endemic land-races of Saudi-Arabian cereal species
… collected seeds and in material naturally or artificially aged under different storage conditions. Electrolyte leakage (measured as electrical conductivity) was evaluated as an indicator of deterioration of wheat seed quality. The germination responses to salinity of all five species showed …
-
Small-Scale Characterization Of Additively Manufactured And Heat Treated AlSi10Mg
… (WQ), air cooling (AC), furnace cooling (FC) and artificial ageing (soaking at 170 ℃ for 4 hours). The post heat treatment is utilized to homogenize the microstructure and dissolve the formation of anisotropy in the microstructure thus improve the ductility and strengthening the alloy. Along with …
-
Design and synthesis of new materials for the protection, restoration, and conservation of carbonate stone artifacts of interest in the field of Cultural Heritage.
… immersion, brushing, and spraying, followed by artificial ageing protocols to simulate realistic degradation. Treatments were evaluated through a comprehensive suite of analytical techniques, including SEM, optical microscopy, thin–section petrography, GID–XRD, and various physical and …
-
Ανάπτυξη και εφαρμογή ενόργανων αναλυτικών μεθόδων προσδιορισμού φυσικών οργανικών χρωστικών σε έργα της πολιτιστικής κληρονομιάς
… consideration the previous criteria. Moreover artificial ageing of dyed fibres was applied in order to identify changes on the samples. Chromatometry, HPLC, Infrared Spectroscopy that were used, indicate differentiations in colour of fibres, show decrease of the initial coloring compounds. HPLC …
-
Manufacturing of aluminium metal matrix composites by high pressure torsion.
… is recorded in HPT processed AA 7075 due to artificial ageing. However, XRD results show that the microstructure changed after artificial ageing. In comparison, the addition of ND resulted in softening AA 7075. In contrast, MoS<sub>2</sub> AA 7075 MMC have shown higher hardness than two …
-
Characterizing Organic Coatings on Renaissance Bronzes with Short-Wave Infrared and Mid-Infrared Spectroscopy
… the hard, insoluble coatings historically used. Artificial ageing was then applied to simulate long-term oxidation and polymerization. A spectral reference database was developed by analyzing coatings at each stage—raw, stoved, and aged—using ER-FTIR, FORS, and, selectively, pyrolysis gas …
Page 1 of 2