Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 97 for “"ashing"”.
-
A Comparison of the Persulfate and the Ashing Analysis for the Total Phosphorus
… methods, 1. e. the persulfate oxidation and the ashing methods, and to optimize various variables, while at the same time insuring the greatest recovery of phosphorus. Various natural samples in the water and wastewater field ranging from liquid to solids have been analyzed for method evaluation …
-
RATIONAL DESIGN OF NON-DAMAGING CAPACITIVELY COUPLED PLASMA ETCHING AND PHOTORESIST STRIPPING PROCESSES FOR ULTRALOW K DIELECTRIC MATERIALS
… stripping using both remote plasma and in situ ashing processes coordinated with CCP fluorocarbon (FC)-based ULK etching. Remote H2 plasma enabled a high PR ashing rate while introducing little ULK damage at an elevated substrate temperature (275 °C), and was the best for our remote plasma …
-
Pulse microwave mediated sample clean-up method to analyse trace metals, PCBs and pesticides, and for treatment of organic wastes
… is described for open vessel pulse microwave wet ashing system. In wet ashing procedure organic matrix in biological tissues is digested in acid. This step must precede trace metal analysis by atomic absorption spectroscopy. Conventional wet ashing procedure using hot plate takes several hours. …
-
The influence of coal–associated trace elements on sintering and agglomeration of a model coal mineral mixture
… compounds on the mineral mixture at different ashing temperatures was investigated with the ash fusion temperature test. The results indicated that the ash fusion temperatures were decreased by the addition of GeS and PbC03 at an ashing temperature of 500°C, decreased by SrC03 at an ashing …
-
Ανάπτυξη μεθόδων προσδιορισμού ιχνοστοιχείων σε τρόφιμα φυτικής προέλευσης με την τεχνική της φασματοσκοπίας ατομικής εκπομπής επαγωγικά συζευγμένου πλάσματος
… procedures (two wet digestion and two dry ashing methods) that gave complete sample dissolutions (analyte transfer into solution) were selected and further developed for simultaneous determination of essential (Cr, Cu, Fe, Mg, Mn, Zn), non-essential (Ag, Al, Ba, Bi, Ga, In) and toxic (Cd, …
-
Studies on methods for dry matter, crude ash, and nitrogen analysis in animal feeds
… in time and temperature and the use of ashing aids as well, on the crude ash estimates. Twenty-four study materials from eight different feeds were evaluated. The control method was based on a simple ignition time of 3 h at 550°C. The methods variations were: increasing ashing time to 6 …
-
Techno-economic analysis of ash removal in algal biomass
… and validated with experimental data for the de-ashing process. A total of 14 different scenarios were investigated based on two different ash removal techniques, water wash and alkaline extraction treatment operated at various temperatures and alkaline levels. The engineering process model was …
-
Studies of Calcium and Other Storage Minerals in Embryos of Cucurbita Maxima, Cucurbita Andreana and their Reciprocal Hybrids
… of organic matrix of the samples. Dry ashing of cucurbit embryo tissues resulted in the discovery of some unique characteristics of these tissues. When ground embryo samples of less than 0.05 g weight were ashed in porcelain crucibles, the measured Ca levels were abnormally high due to …
-
Correlated SEM, FIB, and TEM Studies of Material Collected by the NASA Stardust Spacecraft
… the Stardust aerogels are conducted with plasma ashing sample preparation followed by detailed characterization of the material with TEM. Additional studies of the Stardust interstellar foils, as well as the use of a Convolutional Neural Network (CNN) to search images of the Stardust foils for …
-
Organosolv delignification of willow: Kinetics, recovery and use
… hemicellulose prior to organosolv pulping. De-ashing is a treatment to remove the acid-neutralising components (ash and extractives) of biomass. It was previously thought that organosolv delignification proceeded faster after prehydrolysis due to increased accessibility of solvent to lignin. …
-
The effects of post-ash cleaning and chemical treatments on the dielectric properties and reliability of Cu/low-k interconnect structures
… in its dielectric properties due to etching and ashing processes. These processes deplete the carbon from the trench interfaces and increase the hydroxyl content in the dielectric. As a result, the dielectric constant increases and the leakage and reliability characteristics degrade. The …
-
Method for patterning poly(acrylic acid) sacrifical layers for use in solder-based self-assembly
… a partial development technique; oxygen plasma ashing; and a strong alkaline solution to etch the sacrificial layer and reflow the solder. Plasma ashing is important to keep water and alkaline developers from etching the vulnerable poly(acrylic acid) layer too early in the process. This method …
-
Reactive Gases In Electrothermal Atomisation Atomic Absorption Spectrometry
… by converting the normal charring into an ashing step. A number of interferences eg. magnesium chloride on lead determinations and non-specific absorbance interferences, decreased when air was introduced. Hydrocarbon gases (< 5% v/v) introduced during charring improved sensitivity (up to …
-
Low damage processing and process characterization
… pulsed inductively coupled plasma source) and ashing process characterization were investigated. The primary goal was to characterize these source properties and develop corresponding applications. The study includes process damage assessment with these two sources and another continuous wave …
-
Water leaching of inorganic species from coal ash and slag generated at typical Underground Coal Gasification (UCG) temperatures
… ash samples and slag as the temperature of the ashing rises. The surface area results show a reduction in surface area and porosity as the temperature of the ashing increases, with the slag at 1300oC having the lowest surface area and porosity. Leaching experiments were conducted on the coal and …
-
Preparation and Analysis of Coal for Metals
… of coal for metals is reported. Wet and dry ashing methods were investigated for the dissolution of coal samples. Nitric acid was the primary oxidizing acid. Sulfuric and perchloric acids were also used and their effect on the results is reported. Hydrofluoric acid was used to dissolve any …
-
An Improved Method for the Determination of Crude Fiber and Nitrogen Extract of Feeds
… ashed and reweighed. The loss in weight upon ashing is calculated as the percentage of crude fiber of the material sampled. This method is the present official method of the Association of Official Agricultural Chemists.
-
The role of suction boxes on forming section retention and filler migration
… migration by analysing samples through weighing, ashing and EDX analysis. It was found that increasing suction pressure slightly decreased the overall retention, although the effect was greater at higher filler loadings. The forming fabric selection was statistically significant in determining the …
-
The determination of gold in vegetation and its application to specific problems in biogeochemistry : a thesis presented in partial fulfilment of the requirements for the degree of Master of Science in Chemistry in the Dept. of Chemistry and Biochemistry at Massey University
… The optimum instrumental conditions for drying, ashing and atomization of gold were as follows: drying, 4.5V, 20 secs; ashing 6V, 20 secs; atomization 8V, 4 secs. A furnace cooling time of 50 sec. was allowed to attain high precision of signal heights. Tests on the efficiency of the method …
Page 1 of 5