Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 71 for “"atactic"”.
-
Dielectric properties of atactic and isotactic polystyrene
… dielectric constant and dissipation factor of atactic and isotactic polystyrene at 25°C and at frequencies of 0.1, 1.0, 10, and 100 kilocycles per second. In addition, the effects of molecular weight and crystallinity on the dielectric properties of polystyrene mos also …
-
Surface Dynamics, Glass Transition, and Crystallization of Atactic Polystyrene
… the direct evidence of the crystallization of atactic polystyrene, and systematically study the growth and melting kinetics of these crystals. In chapter five, the thermal expansivity of polystyrene thin films is measured using ellipsometry. These results confirm the validity of the recently …
-
ATOMISTIC SIMULATIONS OF ATACTIC POLYPROPYLENE: INITIAL GUESS OPTIMIZATION AND LONG-RANGE CORRECTION EVALUATION
… and entanglement of atomistic models of atactic polypropylene are strongly sensitive to density changes and were improved at densities that were even higher than the experimental density. However, there were only slight changes to structural properties such as mean square radius of …
-
Calculation of the unperturbed dimensions for linear atactic polymers on a square lattice
Thesis (M.S.)--Michigan State University. Dept. of Chemistry, 1963
-
A study of miscibility, morphology, crystallization and melting behavior of isotactic poly(propylene) in blends of poly(propylene) and poly(1-butene)
… on the blends of the same it-PP with an atactic poly(i-butene) of lower molecular weight and blends of the atactic poly(1-butene) with an atactic polypropylene. From studies of the glass transition behavior, morphology and growth rate, it was found that the it-PP and the at-PP are …
-
DEGENERATIVE TRANSFER LIVING ZIEGLER-NATTA POLYMERIZATION OF α-OLEFINS
… to occur (Rex>>Rp). Under MeDeT conditions, atactic polyolefins are produced due to the configurational instability of the amidinate ligand in its dormant state, with the rate of epimerization being much faster than the rate of propagation (Repi >>Rp). The configurational stability of all the …
-
Blends of bitumen and polypropylene : their physico-chemical properties
<p>The project was designed to study 'atactic polypropylenes/ bitumens, and their blends, as used in commercial waterproof roofing membranes. Low temperature DSC was used to investigate the lowering of the glass transition (Tg) of the blends by 'atactic polypropylene' ('APP'), in order to 6nd the …
-
Examination of Dynamic Processes in Living Ziegler-Natta Polymerization and New Polypropylene Architectures through Bimolecular Control
… equivalents of [PhNMesub2H][B(Csub6Fsub5)sub4], atactic polypropylene was produced due to the rapid degenerative transfer of methyl groups between active and dormant centers, which results in the racemization of active sites by virtue of the configurational instability of the dormant state. …
-
Tuning topography and patterns of thin polymer films on structured substrates
… surface topographies. The material of choice was atactic polystyrene.<br>Substrates containing networks of filaments of polystyrene were used in order to study adhesion forces between the filaments, the substrate and a polystyrene film which was deposited on top of them. The polystyrene network of …
-
Nitroxyl-Mediated Peroxide Modification of Polypropylene
… through studies of model hydrocarbon systems and atactic-PP substrates. Primary, secondary and tertiary alkoxyamines are integral to modern techniques for modifying the architecture of linear PP materials, and detailed knowledge of their stability at polymer processing temperatures is needed to …
-
The effects of ionising radiation on polypropylene
… to post-irradiationeffects.Isotactic and atactic polypropylene were δ and electron irradiated to doses of up to 20 megarad. Irradiations weremainly made in air. A series of other polymers were also irradiated in a preliminary survey. Molar mass measurements are used to measure the …
-
Decoding Charge Block Sequence Effects on Polyampholyte Behavior with Synthetic Protein Analogs
… peptides. In the second part, we synthesize atactic polypeptides by incorporating D-chiral residues to better isolate electrostatic interactions and reduce hydrogen bond interactions. We generally observe increased phase separation with increased blockiness. Small angle scattering reveals …
-
Synthesis, Characterization, and Kinetic Studies of Poly(Dimethylacrylamide) Macromonomer
… The produced macromonomers characterized with atactic and syndiotactic structure were completely soluble in tetrahydrofuran.</p> <p> The molecular weights of macromonomers were evaluated by a gel permeation chromatography, GPC. The best results were obtained by using dimethylformamide as a …
-
End-Group Functionalized Poly(α-olefinates) as Modular Building Blocks
… intermediate. These low molecular weight, atactic poly(α-olefinates) are attractive non-polar building blocks for new types of self-assembling polyolefin materials with tunable occupied volumes and lengths. In the present work, the investigation of self-assembled morphology manipulation …
-
Study of the miscibility, crystallization and morphology in poly(propylene) based blends and copolymers
… this dissertation, the miscibility behavior of atactic - poly(propylene) (at-PP) and atactic poly(1-butene) (ai-P1B) with different molecular weights is investigated by differential scanning calorimetry. The phase diagram of at-PP and at-P1B blend of molecular weight (87K/48.5K) shows a upper …
-
Ατομιστική και αδροποιημένη προσομοίωση νανοδομημένων πολυμερικών υλικών: νανοσύνθετα ατακτικού πολυστυρενίου - άμορφης πυριτίας
… topological, and mechanical properties of atactic polystyrene of high molecular weight. The complexity of intermolecular interactions and confinement in polymer – nanoparticle systems leads to spatial variations in structure and dynamics at both the meso- and nanoscale. The attributes of a …
-
Equilíbrio de fases de soluções polidispersas de polímeros
… correspond to an approximate measure of the atactic and oligomeric chains. To describe the mixtures, the Flory-Huggins model was extended to handle multicomponent polydisperse systems. The model was implemented in MATLAB ® and although relatively simple, fitted experimental data accurately …
Page 1 of 4