Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 149 for “"atomizer"”.
-
Atomization of Non-Newtonian Fluids by Counterflow Atomizer
… distributionsgenerated using a Counterflow atomizer were studied. Aqueous solutions of Sodium Carboxymethyl cellulose (SCMC) salt of 0.5%, 1%, 1.5% and 2% by weight were considered for experiments, with corresponding zero shear viscosity values of 13.8 mPas, 28.2 mPas, 508 mPas and 1280 …
-
Computer assisted characterization of a filament electrothermal atomizer
Thesis (Ph. D.)--Michigan State University. Department of Chemistry,
-
Zeeman background correction with an electrothermal graphite braid atomizer
Thesis (Ph. D.)--Michigan State University. Department of Chemistry, 1981
-
FLAME PHOTOMETRY OF PHOSPHORUS AND SULFUR BY GRAPHITE ATOMIZER VAPORIZATION
… dissertation. A Perkin-Elmer HGA 2100 graphite atomizer is coupled to a flame photometer. Samples containing 25 (mu)L of aqueous phosphate solutions are placed in the atomizer with a micropipet. The atomizer dries the sample at 100(DEGREES)C, then vaporizes the phosphorus compound at …
-
The Influence of Injection Gas Molar Mass on Counterflow Atomizer Performance
… of injection gas molar mass on counterflow atomizer performance in terms of droplet Sauter mean diameter (SMD) and relative span factor (RSF). Gas molar mass is found to influence SMD as significantly as gas to liquid mass flow ratio (GLR). RSF is found to depend strictly on SMD, with no …
-
Plasma Torch Atomizer-Igniter for Supersonic Combustion of Liquid Hydrocarbon Fuels
… combustion of hydrocarbons, an effective atomizer-igniter combination with the capabilities of fuel preheating, atomization, penetration, mixing, ignition and flameholding is desired. An original design concept incorporating these capabilities was built and tested at Virginia Tech, and was …
-
Solidification analysis of a centrifugal atomizer using the Al-32.7wt% Cu alloy
<p>A centrifugal atomizer (spinning disk variety) was designed and constructed for the production of spherical metal powders, 100-1000 microns in diameter in an inert atmosphere. Initial atomization experiments revealed the need for a better understanding of how the liquid metal was atomized and …
-
Analyzing white beam images of an airblast atomizer under various ambient pressures
The atomization of a liquid jet into a spray is found in a wide variety of industrial processes, and the behavior of the atomization often directly impacts the performance of the process. A series of studies performed by this group have been dedicated to investigating the near-field region of …
-
Computational and Experimental Study of Two Phase Flow in Pressure Swirl Atomizer
Atomizers are used in many engineering applications including spray combustion in furnaces, diesel engines, direct injection petrol engines and gas turbine engines. They are also commonly used in applying agricultural chemicals to crops, paint spraying, food processing and cooling of nuclear cores. …
-
Experimental investigations of atomization characteristics of an airblast atomizer at high ambient pressure
<p>Spray performance of swirling airblast atomizer is important to fuel droplet combustion, heat transfer and pollutant emission for aircraft engines. Optimizing atomization characteristics of fuel injectors is one of goal for next generation aircraft. A comprehensive experimental investigation …
-
Development and Characterization of a Synchronously Actuated Response Atomizer for Studying Thermoacoustic Instabilities
… The SARA or Synchronously Actuated Response Atomizer is a liquid fuel atomizer and supply system designed to allow for the active control of droplet size, cone angle, and mass flow rate. These three parameters have been shown to be important in controlling combustion quality and heat release. …
-
Liquid Atomization by an Electrostatic Rotating Bell Atomizer and Spray Deposition on Solid Surfaces
In an electrostatic rotating bell (ESRB) atomizer, fluid is driven from a central orifice over the bell-cup’s surface towards its edge by the centrifugal force. After the fluid is ejected, it breaks up into droplets. Images of these spray droplets were captured using a DropSizer while operating the …
-
Measurement of Flow Velocities in a To-Scale Simplex Atomizer Using Particle Image Velocimetry
… of the internal fuel flow of a simplex atomizer. Particle Image Velocimetry was used to measure velocity in a plane axial to the flow internal to a standard aerospace fuel atomizer. The geometry studied used a 0.74mm orifice and is typical of a commercial aircraft engine. MIL PRF-7024 …
-
The performance of a pressure atomizer with a flow obstruction upstream of the nozzle
… internal flow and the spray formed by a pressure atomizer with an orifice diameter of 1mm and a length to diameter ratio of 10 were studied at injection pressures between 70 and 5000 kPa. Obstructions to flow were also introduced inside the injector to examine their effect on the injector's …
-
Numerical simulation of two-phase flow in an effervescent atomizer for nano-suspension spray
… a uniform and non-pulsating spray. Effervescent atomizers, in which a gas is bubbled into the bulk liquid through an aerator, have shown to be a technological alternative to the conventional atomizers when atomization of liquids with large variety of viscosity and density is required. Thus, …
-
Experimental Investigation of Pressure-Swirl Atomizer Spray Stability with Addition of a Pre-Filming Surface
… fuel spray. In this work, a pressure-swirl atomizer was studied under steady state operation and oscillating pressure differential conditions to simulate a dynamic system input to the atomizer. Atomizer spray with and without the addition of a pre-filming surface was evaluated to determine …
-
Numerical modelling of in-nozzle flow transient effects and fuel atomization characteristics of an industrial atomizer
Internally mixing twin-fluid Y-jet atomizers are widely used in coal fired thermal power plants for start-up, oil-fired thermal power plants and industrial boilers. The present work is the first to numerically model the multiphase flow through twin fluid Y-jet atomizer as function of the various …
Page 1 of 8