Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 10 of 10 for “"average current control"”.

  1. Control de puentes activos duales (DABs) en sistemas bidireccionales de alimentación con alta densidad de potencia

    … distributed not only centralized. The converters control is defined by function within the system, especially when there are large differences in voltage levels. It is desirable that the converter provide galvanic isolation, control current and / or voltage at one or both buses, and in some cases …

    upv Repository record for Control de puentes activos duales (DABs) en sistemas bidireccionales de alimentación con alta densidad de potencia (opens in a new tab)

  2. Sensorless Control of a Bidirectional Boost Converter for a Fuel Cell Energy Management System

    … cost through topology changes and elimination of current sensors. A dual 2.5kW non-isolated bidirectional boost converter is designed and analyzed. The various bidirectional boost topologies are compared on cost and ability to meet the specifications. A sensorless average current mode is designed, …

    vt Repository record for Sensorless Control of a Bidirectional Boost Converter for a Fuel Cell Energy Management System (opens in a new tab)

  3. Active adaptive auxiliary circuit for stabilizing dc distribution systems with constant power loads

    … and/or requirement of changing the internal controls in existing loads. This thesis presents a new active damping methodology using an auxiliary converter circuit to stabilize DC distribution systems with CPLs. A simplified single frequency criterion is proposed for identifying the damping …

    ubc Repository record for Active adaptive auxiliary circuit for stabilizing dc distribution systems with constant power loads (opens in a new tab) Download PDF for Active adaptive auxiliary circuit for stabilizing dc distribution systems with constant power loads (opens in a new tab)

  4. Design and implementation of a boost active power factor corrector

    The input current harmonics of the rectifier are very harmful. Not only do they reduce the power factor of the AC-DC converter and cause a lot of electrical energy loss, but also damage other devices and pollute the line power system. Measures should be taken to reduce these harmonics. The commonly …

    ubc Repository record for Design and implementation of a boost active power factor corrector (opens in a new tab) Download PDF for Design and implementation of a boost active power factor corrector (opens in a new tab)

  5. Small Signal Analysis and Control of Snubberless Naturally-Clamped Soft Switching Current-Fed PWM DC/DC Converters

    … transformer isolated topologies are introduced. Currentfed topologies offer the merits of high voltage gain, stiff input current and reduced peak currents. The major limitations of current-fed converters is the requirement of snubber circuit to clamp the turn-off voltage spike across the …

    concordia Download PDF for Small Signal Analysis and Control of Snubberless Naturally-Clamped Soft Switching Current-Fed PWM DC/DC Converters (opens in a new tab)

  6. Active Power Decoupling (APD) Converter for PV Microinverter Applications

    … scheme, and circuit components, along with the control strategy, will enhance the efficiency, power density, reliability, and cost of the overall PV microinverter. This Ph.D. dissertation proposes an APD converter circuit suitable for PV microinverters, designed for optimized efficiency, power …

    maryland Repository record for Active Power Decoupling (APD) Converter for PV Microinverter Applications (opens in a new tab)

  7. DC/DC Converters with High Power Density and Fast Response for Pulsed Load Applications

    … the following three conditions: 1) high peak to average power ratio (PAPR); 2) small duty ratios under peak power; and 3) fast pulse rise and fall times. With the additional requirement of high power density in modern space-constrained applications, these bring several challenges in the design of …

    houston Repository record for DC/DC Converters with High Power Density and Fast Response for Pulsed Load Applications (opens in a new tab)

  8. High-Frequency Quasi-Single-Stage (QSS) Isolated AC-DC and DC-AC Power Conversion

    … minimal extra commutation circuitry, simple PWM control, and high efficiency and reliability. A new soft-switched single-phase QSS bi-directional inverter/rectifier (charger) topology is derived based on the QSS power conversion concept. A simple active voltage clamp branch is used to clamp the …

    vt Repository record for High-Frequency Quasi-Single-Stage (QSS) Isolated AC-DC and DC-AC Power Conversion (opens in a new tab)

  9. Evaluation of boost converter and single phase inverter circuit efficiency improvement using silicon carbide devices and IGBTs

    … achieved 1.25% improvement in efficiency on average with variation of load resistance compared to that of IGBT where Silicon Carbide Schottky Barrier diode was used in both case. For variable input dc voltage, 1.12% increase in efficiency of boost converter circuit with SiC MOSFET was …

    unsw Repository record for Evaluation of boost converter and single phase inverter circuit efficiency improvement using silicon carbide devices and IGBTs (opens in a new tab)

  10. Switch-mode active EMI filtering

    … amplifiers when designed to filter large ripple currents. This work proposes two different approaches for active EMI filters with a switch-mode amplifier to achieve reduced size and low loss penalty: a high-frequency AEF and a synchronous AEF. The high frequency AEF features a switching amplifier …

    texas Repository record for Switch-mode active EMI filtering (opens in a new tab)