Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 90 for “"axial compressor"”.

  1. Modular Multi-Stage Axial Compressor Design

    … components, such as multi-stage axial compressors. It is the objective of this approach to utilize a "core" module in all the compressors, thus maximizing commonality and minimizing all relevant development, design, manufacture, procurement, and service costs; these reductions in …

    embry-riddle Repository record for Modular Multi-Stage Axial Compressor Design (opens in a new tab)

  2. Physics based modeling of axial compressor stall

    Axial compressors are used in a wide variety of aerodynamic applications and are one of the most important components in aero-engines. The operability of compressors is however limited at low-mass flow rates by fluid dynamic instabilities such as stall and surge. These instabilities can lead to …

    gatech Repository record for Physics based modeling of axial compressor stall (opens in a new tab)

  3. Testing and analysis of a transonic axial compressor

    A test program to evaluate a new transonic axial compressor stage was conducted. The stage was designed (by Nelson Sanger of NASA Lewis) relying heavily on CFD techniques while minimizing conventional empirical design methods. The stage was installed in the NPS Transonic Compressor Test Rig and …

    nps Repository record for Testing and analysis of a transonic axial compressor (opens in a new tab)

  4. Modernization of the transonic axial compressor test rig

    … the Naval Postgraduate School's transonic compressor test rig (TCR). The TCR, which exists primarily for the purpose of testing axial fans at engine test speeds, is driven by an air driven turbine that is in turn driven by a twelve-stage compressor that consumes 1 MW of electric power. This …

    nps Repository record for Modernization of the transonic axial compressor test rig (opens in a new tab)

  5. Use of actuator disc model for modelling axial compressor dynamics

    … herein, simplified ways of modelling the flow in axial compressors were investigated. In general full mathematical simulations of multi-stage axial compressors are not efficient in terms of calculation time and resources needed. Therefore to deal with such problems simplified models are used to …

    soton Download PDF for Use of actuator disc model for modelling axial compressor dynamics (opens in a new tab)

  6. Transonic axial compressor design case study and preparations for testing

    Test runs of the transonic axial compressor test rig at the Naval Postgraduate School, Turbopropulsion Laboratory, were conducted in preparation for the installation of a new stage design. Modifications in the cooling air supply to the high speed bearings, and to the design of the torque measuring …

    nps Repository record for Transonic axial compressor design case study and preparations for testing (opens in a new tab)

  7. Developing of a numerical framework for transonic axial compressor analysis

    Modern engineering in the aerospace field of operations is transitioning from real experimental testing to heavily relying on computer-aided engineering (CAE). Computational fluid dynamics (CFD) is a great tool for obtaining estimates of real operations but computational limitations often lead to …

    chalmers Repository record for Developing of a numerical framework for transonic axial compressor analysis (opens in a new tab)

  8. MASS FLOW MEASUREMENT IN THE INLET OF A TRANSONIC AXIAL COMPRESSOR

    … of the inlet bell mouth of a transonic compressor rig both experimentally and through computational fluid dynamics. The new inlet bell mouth was integrated into the test rig to provide more favorable flow conditions for more accurate measurement of the mass flow rate entering the rig. A …

    nps Repository record for MASS FLOW MEASUREMENT IN THE INLET OF A TRANSONIC AXIAL COMPRESSOR (opens in a new tab)

  9. A First Principles Based Methodology for Design of Axial Compressor Configurations

    Axial compressors are widely used in many aerodynamic applications. The design of an axial compressor configuration presents many challenges. Until recently, compressor design was done using 2-D viscous flow analyses that solve the flow field around cascades or in meridional planes or 3-D inviscid …

    gatech Repository record for A First Principles Based Methodology for Design of Axial Compressor Configurations (opens in a new tab)

  10. Quantification of Multistage Particle Fragmentation in a Gas Turbine Axial Compressor

    … As particles progress through the axial compressor, they undergo breakage, which results in a terminal size, at which particles cannot break any further. Existing literature lacks the spatial resolution to quantify where most of the breakage occurs and at what stage terminal size is …

    vt Repository record for Quantification of Multistage Particle Fragmentation in a Gas Turbine Axial Compressor (opens in a new tab)

  11. Assessment of RANS-based Transition Models in an Axial Compressor Stage

    On compressor airfoil surfaces, the boundary layer originates as laminar flow near the leading edge and undergoes transition to turbulent flow at a downstream location, where the skin friction and loss generation characteristics differ significantly between the two states. Accurate representation …

    vt Repository record for Assessment of RANS-based Transition Models in an Axial Compressor Stage (opens in a new tab)

  12. Computational study of hub corner stall in an axial compressor rotor

    The Deverson rotor, a single stage axial compressor designed to simulate a multistage axial compressor, was studied computationally using a 3-D Navier-Stokes solver, the Moore Elliptic Flow Program. A one equation, q-L, transitional turbulence model was used with MEFP for closure of the transport …

    vt Repository record for Computational study of hub corner stall in an axial compressor rotor (opens in a new tab)

  13. ADDITIVELY MANUFACTURED INSTRUMENTATION FOR ENHANCED FLOWFIELD MEASUREMENT IN A TRANSONIC AXIAL COMPRESSOR

    … in the Naval Postgraduate School's Transonic Compressor Rig (TCR), aiming to match the performance of existing instruments with application-specific design. A method was also developed for integrating Laser Doppler Anemometry (LDA) measurement in the TCR. Probes were designed via SolidWorks …

    nps Repository record for ADDITIVELY MANUFACTURED INSTRUMENTATION FOR ENHANCED FLOWFIELD MEASUREMENT IN A TRANSONIC AXIAL COMPRESSOR (opens in a new tab)

  14. INLET MASS FLOW MODELING AND MEASUREMENT THROUGH A TRANSONIC AXIAL COMPRESSOR FAN

    … fluid dynamics model of the Transonic Compressor Rig used for the testing of the Naval Postgraduate School Military Fan. This modeled rig conditions the flow into the rotor while measuring the mass flow rate during experimental testing. Using these simulations, a new bell mouth inlet …

    nps Repository record for INLET MASS FLOW MODELING AND MEASUREMENT THROUGH A TRANSONIC AXIAL COMPRESSOR FAN (opens in a new tab)

  15. Measurement of synchronous forces and flow non-uniformity in an axial compressor

    Time resolved pressure measurements on a compressor case were acquired for several uniform and non-uniform tip clearances. High frequency response pressure transducers were placed at several axial locations near the second stage axial rotor on the outer casing of an Allison C-250 compressor. Data …

    nps Repository record for Measurement of synchronous forces and flow non-uniformity in an axial compressor (opens in a new tab)

  16. Effects of shrouded stator cavity flows on multistage axial compressor aerodynamic performance

    … were performed on a low-speed multistage axial-flow compressor to assess the effects of shrouded stator cavity flows on aerodynamic performance. Five configurations, which involved changes in seal-tooth leakage rates and/or elimination of the shrouded stator cavities, were tested. Data …

    iastate Repository record for Effects of shrouded stator cavity flows on multistage axial compressor aerodynamic performance (opens in a new tab)

Page 1 of 5