Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 285 for “"axial force"”.
-
Effects of Bit Type on Maximum Torque and Axial Force Using Manual Screwdrivers
… bits. While designs may vary, so do the force application requirements placed on the tool user. The primary objective of this experiment is to analyze the relationship between user torque and screwdriver bit design. A further objective is to utilize the results to develop an effort metric …
-
ANALYSIS OF FRAME-CORE WALL BUILDINGS CONSIDERING EFFECTS OF AXIAL FORCE AND AXIAL DEFORMATION
The effects of axial force and axial deformation in columns on dynamic characteristics of frame-core wall tall buildings are considered in the present study. The governing equations of motion for the structure are formulated through a continuum approach idealizing the whole structure as a …
-
Inelastic Analysis of Reinforced Concrete Beams Subjected to Combined Axial Force, Bending and Torsion
The response of reinforced concrete members subjected to combined loading which includes torsion is investigated theoretically for a static monotonically increasing load. A unified model, which is an extension of the space truss model, is developed to solve this problem for rectangular, circular …
-
Hysteretic Behavior Of Thin-Walled Steel Tubular Columns Under Constant Axial Force And Cyclic Lateral Loading
… circular and square box columns under a constant axial force as a superstructure dead load and uni/ bidirectional cyclic lateral loading. First of all, the adopted finite element model (FEM) in ABAQUS/Standard version 6.14, which takes into account the effect of both material and geometric …
-
An Experimentally-Validated V-Belt Model for Axial Force and Efficiency in a Continuously Variable Transmission
… into the magnitude and relationship between the axial forces in the pulleys. This can be used to create an initial design that is more accurate, and possibly reduce the time required for tuning. A CVT dynamometer was constructed to validate the analytical results for efficiency, and this will …
-
Free and forced vibrations of tapered composite beams including the effects of axial force and damping
… understanding of their behavior on free and forced vibrations. In the present thesis, free and forced vibration analysis including the effects of axial force and damping of tapered composite beams is conducted using conventional, and higher-order finite elements and the Rayleigh-Ritz method. …
-
Comprehensive Molecular Dynamics Simulations of Carbon Nanotubes under Axial Force or Torsion Vibration and New Continuum Models
… mechanics of carbon nanotubes (CNTs) under uni-axial deformation, torsion, and vibration. After validating the MD simulation results against previously reported calculations, these MD simulation results were utilized to develop continuum based models for CNTs. These continuum models can mimic …
-
Experimental and metallurgical analysis of friction stir forming (FSF) of steel onto steel by low axial force
… primary goal of this study is to develop a low-force steel-to-steel FSF process that can ultimately be integrated into a robotic repair system for repairing corroded steel tank walls. Because robotic repair platforms have limitations in load capacity and structural rigidity, reducing the axial …
-
Transverse vibrations of a beam with varying moment of inertia, constant axial force and simple or elastic end conditions
… conditions, varying moments of inertia and axial forces. Comparison of results was made to analytical frequency solutions. One result was verified experimentally.
-
An investigation into the failure of neat cement cylinders under independently controlled confining pressure, pore pressure, and axial force
… pressure and pore pressure on the ultimate axial compressive strength of neat cement cylinders. In trying to achieve this purpose the ultimate strength, deformation, and volume change of the material have been studied. The test program consisted of a variation in confining pressure and pore …
-
Design Optimization of Balancing Holes in a Centrifugal Pump
… major operational challenge is the generation of axial force, a force imbalance caused by the pressure difference across the front (suction) and back (pressure) sides of the impeller. If the axial force is not properly investigated during the design process, it can cause bearing failure, increase …
-
Free Vibration of Continuous Beam-Column on Elastic Foundation
… Beam-Column on Elastic Foundation subjected to axial force. The case of continuous Beam-Column on Elastic Foundation without the effect of axial force is also investigated. The dynamic three-moment equation has been drived based on the solution of the governing differential equations. Tables and …
-
Elasto-plastic stress analysis of curved structures with rectangular section
… simple plastic theory in which the effect of the axial force on the formation of a plastic hinge is neglected. In fact this conception is in serious error in some cases, especially when the curved structure is a shallow arch, the stresses developed are apparently governed by the axial force. …
-
System responses of reinforced concrete coupled walls systems
… In such buildings, one of the efficient lateral force resisting systems is coupled walls system, consisting of wall and coupling beams, which not only provide high lateral stiffness and ductile behavior to control story drift demand but also provide convenience to accommodate requirements from …
-
Behaviour of high strength and reactive powder reinforced concrete columns subjected to impact
Reinforced concrete structures during their construction stage and service life may experience severe loadings such as impact and blast loading. The behaviour of reinforced concrete structures under such high rate loading is not thoroughly understood and the conventional design guidelines for …
-
The development and evaluation of an experimental apparatus for the investigation of fastener pull-through failure in graphite-epoxy laminates.
… apparatus was set up to investigate the triaxial loading conditions at the fastener hole so that an M-P-N failure surface could be developed for the graphite-epoxy laminate. An expression was derived to predict the bending moment at the fastener in terms of the pull force on the fastener and …
-
Use of a triboelectric generator for a tunable wideband energy harvester and a threshold shock sensor
… is a tunable wideband energy harvester. An axial force and amplitude limiter work together to create an energy harvester that can accommodate various frequency sources and have a large operating bandwidth. The addition of the compressive axial force also softens the system, which allows for …
-
Effect of Surface Stress on Micromechanical Cantilevers for Sensing Applications
… the free end (Model I), concentrated moment plus axial force acting at the free end (Model II), and uniformly distributed surface force acting along the microcantilever (Model III). Solution to Model I loading is based on the Stoney formula, assuming that the microcantilever is subjected to pure …
Page 1 of 15