Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 25 for “"basalt fibers"”.

  1. Flexural properties of hybridized unidirectional composites reinforced with bamboo and basalt fibers

    … of hybridized composites with bamboo and basalt as reinforcing agents in an epoxy matrix (DGEBA + mPDA) are studied. Unidirectional composites with different weight ratio content of fibers were mechanically evaluated using three-point bending tests. The peak value for flexural modulus of …

    msu

  2. Effects of Nano Silica and Basalt Fibers on Fly Ash Based Geopolymer Concrete

    … Previous research also indicates that silica and fibers provide strength benefits to ordinary Portland cement concrete OPC. This study was undertaken to recognize the benefits of adding silica and basalt fibers in Class F fly ash based geopolymer concrete and comparing it with OPC concrete. One …

    ndsu Repository record for Effects of Nano Silica and Basalt Fibers on Fly Ash Based Geopolymer Concrete (opens in a new tab)

  3. Avaliação de pastas de cimento reforçadas com fibras de basalto moídas para aplicação em poços de petróleo

    The dispersion of short fibers to oil well Portland slurries may improve the compressive strength and fracture energy of the hardened cementing material. This study aimed to investigate the effect of the addition of milled basalt fibers to Portland slurries. The fibers were added at varied average …

    brazil-ufrn Repository record for Avaliação de pastas de cimento reforçadas com fibras de basalto moídas para aplicação em poços de petróleo (opens in a new tab)

  4. Continuous basalt fiber as reinforcement material in polyester resin

    … are important factors in product development. Basalt fibers are a natural material, produced from igneous rock which can provide high strength relative to weight. Research has also shown that basalt fibers have many other advantageous qualities. This thesis describes an applied research …

    reykjavik Repository record for Continuous basalt fiber as reinforcement material in polyester resin (opens in a new tab)

  5. Advances in sheet molding compounds for automotive applications

    … general approaches were chosen: 1) Investigating basalt fibers as an alternative reinforcement to the commonly used glass fibers and 2) light-weighting of SMC composites by replacing a portion of the heavy reinforcing fibers with a small amount of cellulose nano-crystals (CNC). An SMC production …

    gatech Repository record for Advances in sheet molding compounds for automotive applications (opens in a new tab)

  6. Behavior of Concrete Members Reinforced with Basalt FRP

    … rehabilitation of structures. Glass and carbon fibers were the main types of fibers used in these composites and basalt fibers are emerging as alternative forms of reinforcement. Basalt fibers have high strength, stiffness, and corrosion resistance that are typical of composites. Composites are …

    wvu Repository record for Behavior of Concrete Members Reinforced with Basalt FRP (opens in a new tab)

  7. Desarrollo y optimización de 'green composites' basados en matrices derivadas de aceites vegetales modificados y refuerzos de fibras minerales

    … from epoxidized vegetable oils and mineral fibers, which have similar properties to glass fibers. The matrices used are based on epoxidized linseed oil (ELO) and epoxidized soybean oil (ESBO), and two types of crosslinking agent. One is a eutectic system of phthalic anhydride (PA), 23.8 wt%, …

    upv Repository record for Desarrollo y optimización de 'green composites' basados en matrices derivadas de aceites vegetales modificados y refuerzos de fibras minerales (opens in a new tab)

  8. Development And Characterization Of Nanoparticlee Enhancements In Pyrolysis-derived High Temperature Composites

    … that aligned carbon nanotubes (CNTs) grown on fibers can improve their thermal conductivity and wettability. To this end vertically aligned CNTs were studied for their potential use, but found to be difficult to process with current conventional techniques. A composite material comprised of …

    ucf Repository record for Development And Characterization Of Nanoparticlee Enhancements In Pyrolysis-derived High Temperature Composites (opens in a new tab)

  9. Processing and Characterization of Continuous Basalt Fiber Reinforced Ceramic Matrix Composites Using Polymer Derived Ceramics

    … thermal and mechanical properties. The use of basalt in structural and high temperature applications has been under development for over 50 years, yet there has been little published research on the incorporation of basalt fibers as a reinforcement in the composites. In this study, continuous …

    ucf Repository record for Processing and Characterization of Continuous Basalt Fiber Reinforced Ceramic Matrix Composites Using Polymer Derived Ceramics (opens in a new tab)

  10. STRENGTHENING OF DAMAGED STRUCTURAL MEMBERS WITH EXTERNAL FRP

    … aims at evaluating the use of carbon, glass, basalt, and hybrid FRPs with epoxy and polyurethane resin systems for rehabilitation of damaged structural components. Following evaluations were carried out in this research: (i) tension testing of FRP coupons, (ii) compression testing of concrete …

    wvu Repository record for STRENGTHENING OF DAMAGED STRUCTURAL MEMBERS WITH EXTERNAL FRP (opens in a new tab)

  11. Mechanical Study on Edge-Oxidized Graphene Oxide (EOGO) Reinforced Concrete

    … their low workability. Two different types of fibers were used, including basalt and steel fibers. The results indicated that EOGO is not effective in basalt fiber reinforced concrete (BFRC) perhaps due to the high absorption of basalt fibers. However, adding EOGO to steel fiber reinforced …

    ucf Repository record for Mechanical Study on Edge-Oxidized Graphene Oxide (EOGO) Reinforced Concrete (opens in a new tab)

  12. Basalt Microfiber Reinforcement for Improving Desiccation Behavior of Clay Bentonite for Nuclear Waste Disposal: An Experimental Investigation

    … effective in reinforcing desiccation cracking. Basalt fiber is a high-density material that has been used to provide physical reinforcement for composite materials (Bella, 2015; Dhand, 2015). There has also been some research on the use of basalt fibers for nuclear waste disposal application. …

    tamu Repository record for Basalt Microfiber Reinforcement for Improving Desiccation Behavior of Clay Bentonite for Nuclear Waste Disposal: An Experimental Investigation (opens in a new tab)

  13. A micro-scale method to associate the fatigue properties of asphalt binder, mastic and mixture

    … after large number of loading cycles. The basalt fibers are dispersed into the asphalt binder and mastic specimens, the effects of the basalt fiber to the performances of the binder and mastic at low temperature are analyzed using both experimental and FEM modeling methods.

    vt Repository record for A micro-scale method to associate the fatigue properties of asphalt binder, mastic and mixture (opens in a new tab)

  14. Fatigue Flexural Behaviour of Reinforced Concrete Beams with Non-Prestressed and Prestressed Basalt Fiber Reinforced Polymer Bars

    Basalt fibers have recently been introduced as a promising alternative to the existing fiber reinforced polymer (FRP) family. The mechanical properties of basalt FRP (BFRP) bars are, generally, better than those of glass FRP (GFRP) bars. However, they are still lower than those of carbon FRP (CFRP) …

    waterloo Repository record for Fatigue Flexural Behaviour of Reinforced Concrete Beams with Non-Prestressed and Prestressed Basalt Fiber Reinforced Polymer Bars (opens in a new tab)

  15. Cyclic and Impact Resistance of FRP Repaired Poles

    … The composite systems were comprised of glass or basalt fibers paired with epoxy or polyurethane matrices. The effectiveness of FRP in repairing the damaged poles was demonstrated in previous tests on dented poles using 3-point, 4-point, and cantilever bending tests. The repair systems were able …

    ucf Repository record for Cyclic and Impact Resistance of FRP Repaired Poles (opens in a new tab)

  16. Functional interphases for structural composites

    … cracks at the contact region between matrix and fibers. Robust interfacial adhesion and self-healing capability are crucial to reduce defects and extend the material service life. The intent of this Doctoral Thesis was to provide a contribution in this field, by focusing on two primary research …

    trento Repository record for Functional interphases for structural composites (opens in a new tab)

  17. Propuesta de mejora de la carpeta asfáltica por medio de fibras de basalto y lignina, para el control de deformaciones permanentes en carreteras sometidas a carga vehicular pesada y altas temperaturas

    … convencional mediante la adición de fibras de basalto y lignina, de tal manera que sea menos propensa a sufrir deformaciones permanentes. Para la parte experimental, se contó con agregados procedentes de la cantera Conchán, en Lima. Mediante la metodología de Marshall, se diseñaron dos mezclas …

    upc-peru Repository record for Propuesta de mejora de la carpeta asfáltica por medio de fibras de basalto y lignina, para el control de deformaciones permanentes en carreteras sometidas a carga vehicular pesada y altas temperaturas (opens in a new tab)

  18. Aplikace čedičových vláken v cementových kompozitech

    Bakalářská práce se zabývá problematikou použití čedičových vláken v cementových kompozitech a skládá se z rešeršní teoretické a experimentální části. V teoretické části jsou popsány vlastnosti čedičových vláken, technologie výroby a chování čerstvého i ztvrdlého betonu při přídavku těchto vláken. …

    brno-tech Repository record for Aplikace čedičových vláken v cementových kompozitech (opens in a new tab)

  19. Propuesta de diseño de concreto permeable reforzado con fibras de basalto (18mm, l7 µm) para mejorar su desempeño aplicado en pavimentos urbanos

    … factores, se determinó que las fibras de basalto optimizarían el comportamiento del concreto permeable para su aplicación en pavimentos urbanos. Además, se tomó en consideración que el suelo del área de estudio es de grava y la infiltración requerida es de 192.22mm/h. El diseño de mezcla …

    upc-peru Repository record for Propuesta de diseño de concreto permeable reforzado con fibras de basalto (18mm, l7 µm) para mejorar su desempeño aplicado en pavimentos urbanos (opens in a new tab)

  20. Propuesta de diseño de concreto permeable con microsílice reforzado con fibras de basalto para incrementar su resistencia, posibilitar su uso en el pavimento y mitigar las deficiencias del alcantarillado existente durante la época de lluvias en el distrito de Wanchaq - Cusco

    … lo que la inclusión de microsílice y fibras de basalto mejorarían su desempeño mecánico. El área de estudio corresponde al distrito de Wanchaq - Cusco, la cual es afectada por las precipitaciones pluviales intensas y un sistema de alcantarillado combinado que rebasa su capacidad durante la época …

    upc-peru Repository record for Propuesta de diseño de concreto permeable con microsílice reforzado con fibras de basalto para incrementar su resistencia, posibilitar su uso en el pavimento y mitigar las deficiencias del alcantarillado existente durante la época de lluvias en el distrito de Wanchaq - Cusco (opens in a new tab)

Page 1 of 2