Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 43 for “"base oils"”.

  1. Associations between Oil Additives in Base Oils Probed by Pyrene Excimer Fluorescence

    A recently developed method based on pyrene excimer fluorescence was used to probe the interactions of important polymeric oil additives. First, three ethylene-propylene (EP) copolymers representative of viscosity index improvers (VII) were maleated and fluorescently labeled with pyrene to yield …

    waterloo Repository record for Associations between Oil Additives in Base Oils Probed by Pyrene Excimer Fluorescence (opens in a new tab)

  2. A Comparative Study on the Relative Terrestrial Toxicity of Two Gas-To-Liquid (GTL) Base Oils to a Low Toxicity Mineral Oil (LTMO), a Diesel, and a Biodiesel

    … the relative terrestrial toxicities of four base oils (GTL-1, GTL-2, LTMO, Diesel) were compared. This research included freshly spiked soils and oil-spiked soils that had been previously weathered 90 days at climates (10oC and 30oC) similar to those of popular drilling locations. First the …

    ttu Repository record for A Comparative Study on the Relative Terrestrial Toxicity of Two Gas-To-Liquid (GTL) Base Oils to a Low Toxicity Mineral Oil (LTMO), a Diesel, and a Biodiesel (opens in a new tab)

  3. NMR response of liquids and of natural gas mixtures

    … assist in detecting and characterizing formation oils and gases. This work involves NMR laboratory experiments at a 1 H frequency of 2 MHz. Thermodynamic and transport properties are established by sample preparation or are obtained by measurement or are based on available data. Then, the …

    rice Repository record for NMR response of liquids and of natural gas mixtures (opens in a new tab)

  4. Multifunctional additives for lubricating oil

    … in delivering functionalities beyond those of base oils alone, including friction and wear control, corrosion inhibition, contaminant management and oxidation resistance. These functions are essential for maintaining engine durability, preserving lubricant performance and improving energy …

    qu-belfast Repository record for Multifunctional additives for lubricating oil (opens in a new tab) Embargoed until 2031-12-31

  5. Volumetric Properties and Viscosity of Fluid Mixtures at High Pressures: Lubricants and Ionic Liquids

    … of experimental data and models. These included base oils and their mixtures with polymeric additives, used in lubricants and ionic liquids, with cosolvent addition, for use in biomass and polymer processing. Experimental density data were collected using a variable-volume view-cell at pressures …

    vt Repository record for Volumetric Properties and Viscosity of Fluid Mixtures at High Pressures: Lubricants and Ionic Liquids (opens in a new tab)

  6. Synthesis and Application of Oil-Soluble Polymer Brush-Grafted Silica Nanoparticles as Lubricant Additives for Friction and Wear Reduction

    … to undergo aggregation and precipitation in base oils has been an obstacle for real-world applications. This dissertation research aims to develop oil-soluble, polymer brush-grafted nanoparticles (hairy NPs) for use as additives for base oils such as polyalphaolefin (PAO). Well-defined hairy …

    utk-theses Repository record for Synthesis and Application of Oil-Soluble Polymer Brush-Grafted Silica Nanoparticles as Lubricant Additives for Friction and Wear Reduction (opens in a new tab)

  7. Estudo tribológico de nanolubrificantes para aplicações em engrenagens

    … the tribological performance of nanolubricants based on polyol esters (POE) with different concentrations of reduced graphene oxide (rGO) for application in wind turbine gearbox gears. Initially, three synthetic base oils (PAO-40, PAG-320, and POE-2087) were selected and characterized through …

    brazil-ufrn Repository record for Estudo tribológico de nanolubrificantes para aplicações em engrenagens (opens in a new tab)

  8. Design and Development of a High-Temperature High-Pressure Rolling Ball Viscometer/Densimeter and Evaluation of Star Polymer-Solvent Mixtures

    … is to add homopolymers and copolymers to base oils to modify bulk fluid viscosity and frictional properties for these demanding applications. However, designing polymeric additives for lubricants and predicting their performance is limited by the lack of available high-temperature …

    vcu Repository record for Design and Development of a High-Temperature High-Pressure Rolling Ball Viscometer/Densimeter and Evaluation of Star Polymer-Solvent Mixtures (opens in a new tab)

  9. The effect of blending on selected physical properties of crude oils and their products

    … upon selected physical properties of crude oils, and of various base oils and petroleum products, using a range of binary mixtures. The crudes comprised light, medium and heavy Kuwait crude oils. The properties included kinematic viscosity, pour point, boiling point and Reid vapour pressure. …

    aston Download PDF for The effect of blending on selected physical properties of crude oils and their products (opens in a new tab)

  10. Characterization of palm olein (oil) as base oil for biolubricant production

    … of the properties of palm oil as potential base oil for producing bio based lubricants. The samples analysed were obtained from the open markets in the South West, South East and South South zones of Nigeria. Some of the physical and chemical properties such as viscosity, flash point, pour …

    cape-town Repository record for Characterization of palm olein (oil) as base oil for biolubricant production (opens in a new tab)

  11. Physical Analysis of Worn Surfaces Formed Under Extreme Pressure Lubrication Conditions

    … structures formed below the wear scars in the base metal. These techniques have been applied to specimens worn under varying loads with two groups of additives (three disulphides and two zine dithiophosphates) and two base oils. The role of these additives has been studied under antiwear and …

    aston Download PDF for Physical Analysis of Worn Surfaces Formed Under Extreme Pressure Lubrication Conditions (opens in a new tab)

  12. The tribological performance of gas turbine lubricants

    … within the engine. The majority component: the base oil usually comprises ~95 % of the lubricant formulation and as a result, it governs most of the viscometric properties and acts as the carrier for the other additives in the formulation. Work was done to understand how variation in the …

    birmingham Download PDF for The tribological performance of gas turbine lubricants (opens in a new tab)

  13. Ionic liquids as additive for lubricants

    … tetraalkylphosphonium ILs in Group III+ base oils are evaluated. The findings from this chapter provide a foundation for subsequent chapters, offering insights into molecular designs and a more focused approach for evaluating new additive compounds.Chapter 3 investigates neutral boron …

    qu-belfast Repository record for Ionic liquids as additive for lubricants (opens in a new tab) Embargoed until 2034-12-31

  14. Lubricant quality and oxidative stability of Cruciferae oils

    … from several Brassica species, and related oilseeds, was investigated for use as a lubricant base-oil. Oils obtained from B. rapa L. were selected because of their superior cold temperature performance over Sinapis alba L., B. carinata A., B. napus, and B. juncea L. The commercial antiwear …

    sask Repository record for Lubricant quality and oxidative stability of Cruciferae oils (opens in a new tab)

  15. Multiphase catalytic reactions in a trickle bed reactor

    … could be fitted well by means of a kinetic model based on the Osborn-Wilkinson reaction mechanism. The selective hydrogenation of 1-heptyne over a 2 wt. % Pd/Al2O3 catalyst was studied in a TBR operating in both batch recycle and continuous modes. Solvent selection and liquid flow rate were found …

    birmingham Download PDF for Multiphase catalytic reactions in a trickle bed reactor (opens in a new tab)

  16. The Effect of Fuel On Automotive Lubricant Degradation

    … degradation of partially formulated and model base oils has been examined by oxidation in bench top reactors under temperature conditions representative of those found in engines with fuel dilution levels representative of those found in the field. The ethanol treatment of squalane samples …

    whiterose Download PDF for The Effect of Fuel On Automotive Lubricant Degradation (opens in a new tab)

  17. Volumetric Properties and Viscosity of Lubricant Oils and the Effects of Additives at High Pressure and Temperatures

    … properties and viscosity of lubricant base oils modified with polymeric additives. Several groups of mineral and synthetic base oils, including Ultra S4, Ultra S8, and poly alpha olefin PAO 4 have been studied. Among the various types of additives explored were viscosity index …

    vt Repository record for Volumetric Properties and Viscosity of Lubricant Oils and the Effects of Additives at High Pressure and Temperatures (opens in a new tab)

  18. Soil microbial community resistance and resilience to biodiesels vs. petroleum diesel

    … aimed to elucidate the impacts of different base oils used in drilling fluids, which are used in the oil extraction process for oil and gas companies, on soil microbial communities and soil restoration potential. Specifically, this work compared the effects of petroleum diesel with three …

    ttu Repository record for Soil microbial community resistance and resilience to biodiesels vs. petroleum diesel (opens in a new tab)

Page 1 of 3