Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 25 for “"base resistance"”.
-
Pile base resistance prediction in multilayered soil systems based on direct CPT methods
Cone Penetration Test (CPT)-based methods for predicting pile base capacity in multilayered soil conditions often yield varied results due to different calculation approaches, indicating a need for a better understanding of pile-soil interaction. This study addresses these gaps by exploring the …
-
Practicing Ecological Security and Making Multispecies Relations in Anti-Base Resistance: Insights from Environmental-Oriented Anti-Base Activists in Henoko and Takae struggles in Okinawa
… the problems associated with the US military bases and operations in relation to environmental justice (EJ), conservation, and ecological security concerns. Focusing on environmental-focused anti-base resistance, my research asks what activities activists engage in and how those activities …
-
Dvipolio tranzistoriaus bazės varžos matavimo įtaiso konstravimas ir tyrimas /
A Construction of a Device that Measures Base Resistance of Bipolar Junction Transistor.
-
The Effect of Temperature on Bipolar Junction Transistor Noise
… an optimum device temperature is sought, and base resistance data is obtained from the noise measurements.</p>
-
Submicron Scaling in Indium Phosphide/indium Gallium Arsenide Single Heterojunction Bipolar Transistors
Measurement-based characterization of SHBTs scaled down to 0.35 mum was performed, and detailed understanding of do and RF scaling properties was developed. Important scaling phenomena that emerge as the emitter width is scaled to the deep submicron regime were identified and analyzed. A unique …
-
Compact models for the high-frequency characteristics of modern bipolar transistors
… originally formulated over 40 years ago, are based upon assumptions that are no longer valid. This thesis deals with the reexamination and improvement of such models, particularly those used to describe the high-frequency characteristics. A new method of describing high-frequency carrier …
-
Models for the pn diode and the npn and pnp transistor for use in computer aided design and analysis programs
… considerably improved, particularly regarding base resistance prediction, prediction of high forward current behavior, and the addition of reverse breakdown terms. The resulting models show substantial improvement in representation of d-c and transient characteristics. Some improvement in a-c …
-
High-efficiency back-contact back-junction silicon solar cells
… due to optical losses, 0.3 %abs. due to series resistance effects and 0.7 %abs. due to electrical shading. The developed model of the loss mechanisms is a powerful tool for the further optimization study of the solar cell structure. Positive effects of the phosphorus doped n+ front surface field …
-
Analytical modeling of single-event burnout of power transistors.
… susceptibility with a decrease in the internal base resistance (in the power BJT or parasitic BJT in the power MOSFET structure), a decrease in the operating bias, or an increase in the ambient device temperature. These findings are then qualitatively verified with experimental data.
-
Analytical solutions of heat spreading resistance from a heat source on a finite substrate with isothermal or convective surfaces
… surfaces. The solutions to heat spreading resistance of these problems are obtained for the first time by the exact treatment of the mixed boundary conditions present on the substrate at the heat source side. In the case of heat spreading through a substrate with isothermal surfaces the …
-
Characteristics of UHF transistors using autoregistered structures
… the conventional overlay transistor's P+ base grid with a refractory metal grid, in order (a) to lower the base resistance and (b) to autoregister the emitter. It was claimed that the linearity of the transistor would also be improved. A number of questions raised by this idea have been …
-
Applied Mechanical Tensile Strain Effects on Silicon Bipolar and Silicon-Germanium Heterojunction Bipolar Devices
… gain degrades for both Si BJT and SiGe HBT. Base current (IB) decreases in Si BJT, though it increases for SiGe HBT after strain. Little or no change is noticed in the dynamic or ac small-signal characteristics like unity-gain cutoff frequency (fT) and base resistance (rBB) after strain. …
-
Power MOSFETs with Enhanced Electrical Characteristics
… offers superior performance, such as low on-resistance, low gate charge and optimized high breakdown voltage. In the vertical power UMOS, a novel trenched Local Oxidation of Silicon (LOCOS) process has been applied to the vertical gate structure to reduce the gate-to-source overlap …
-
The Development And Assessment Of A Post Grouting Method To Increase The Load Carrying Capacity Of Deep Foundations
While post grouting of the base of a drilled shaft is an acknowledged means of mobilizing shaft base resistance at low values of displacement, much uncertainty exists among engineering professionals as to the conditions under which this option may be entertained. The impact of diverse factors such …
-
Track behaviour: the importance of the sleeper to ballast interface
… pre-failure behaviour of the sleeper to ballast base<br/>contact area, show that lateral load/deflection behaviour is load path dependent and relations are<br/>determined for improved computer modelling of the sleeper/ballast interface. Further test results<br/>are used to establish the failure …
-
Axial and Lateral Resistance of Non-Displacement Piles
… or horizontal loads, the mechanisms of the resistance mobilization and the implementation of the research findings in pile design practice. A series of three-dimesional finite element analyses were performed with an advanced, two-surface constitutive sand model to investigate the response of …
-
HETEROJUNCTION BIPOLAR TRANSISTOR (HBT) FOR HIGH POWER APPLICATIONS
… report, a non-self aligned process, entirely based on wet-etching, for the fabrication of Al0.3Ga0.7As/GaAs based HBT with a very thin base (ranging from 400A to 800A) and a minimum emitter area of 6x 10µm2 was presented. An etchant, which consists of 1 part of (27.8g)KI/(16.25g)I2/(25ml)H2O …
-
Rate effects for monopile foundations
… effects. Finally, rate effects were quantified based on test data. It was found that rate effects are evident in monotonic and cyclic lateral loading in stiff clay (approximately 10% increase in capacity per log-10 cycle of the pile rotation rate). In contrast, rate dependency in dry sand …
-
Time Dependent Effect of Drilling Slurries on Side Shear Resistance of Drilled Shafts
… hole. These elements rely largely on side shear resistance generated by their substantial diameters and lengths to effectively transfer loads. Therefore, an exceptional concrete to soil interface is essential for proper performance of these structures. The FDOT preferred stabilization fluid, …
-
Analysis of performance of SiC bipolar semiconductor devices for grid-level converters
… These are dependant on temperature and base resistance, especially in the case of Silicon BJT. <br/>The static performance of power Silicon and SiC BJT has also been evaluated. It has been found that the higher base-emitter junction voltage of SiC BJTs enables quasi-saturation mode of …
Page 1 of 2