Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 86 for “"baseplate"”.
-
The Evaluation of Light Cure Baseplate Material
The study was undertaken to evaluate light cure resin as an alternative to a current self cure material. Light cure materials are supplied by the manufacturer ready mixed in the form of sheets, rope or gel as opposed to the raw chemicals which have to be mixed before or during use. Laboratory tests …
-
Glenoid Baseplate Micromotion in Reverse Total Shoulder Arthroplasty
… with the procedure is loosening of the glenoid baseplate. There are several factors that can contribute to the fixation of the glenoid baseplate including design of the baseplate and implantation method. The objective of this research is to first determine the force required to cause initial …
-
The influence of baseplate fastening systems on railway rolling noise
… noise. For this purpose, a commercial two-stage baseplate system mounted on a slab track is studied experimentally and numerically. The research aims to identify the key design parameters that affect the rolling noise, pointing the way towards controlling noise. These aims are addressed by using …
-
Biomechanical Evaluation of Glenoid Baseplate Stability in Total Shoulder Arthroplasty
… component is a continuing challenge. Glenoid baseplate loosening is sometimes difficult to assess clinically and is typically only assessed following discomfort or total failure of the implant. Therefore, it is important that accurate and thorough mechanical testing be performed regarding …
-
Central Fixation Element Type and Size Affect Glenoid Baseplate Micromotion in Reverse Shoulder Arthroplasty
… was to mechanically evaluate factors affecting baseplate fixation to inform clinicians of possible implant configurations that may decrease micromotion and reduce the risk of loosening. Delta XTEND™ baseplates (DePuy Synthes) were implanted into Sawbones™ polyurethane foam blocks (N = 40) and …
-
Design and performance evaluation of railway sleeper baseplate hold-down system for timber sleeper elastic fasteners
Submission published under a 24 month embargo labeled 'U of I Access', the embargo will last until 2025-12-01
-
The Effect of Central Screw and Post Vault Containment on Reverse Total Shoulder Arthroplasty (RSTA) Baseplate Stability
… One major complication of RTSA is glenoid baseplate failure resulting from increased movement at the bone-baseplate interface. This study examined 36, 12 PCF composite Sawbones® scapulae. The specimens were split equally into 6 study groups, each having different implant configurations with …
-
Evaluation of High Frequency Vibrator Response
… significant response variability across the baseplate, which is dependent on accelerometer position with respect to radial position and internal baseplate structure. Consequently, the baseplate cannot be considered a point source of propagation, which complicates optimizing source operations …
-
Micromotion and Strength of the Glenoid Component in Reverse Total Shoulder Arthroplasty: The Effect of Malpositioning Versus Optimal Clinical Positioning in the Simulated B2 Glenoid
… et al., 2011). More importantly, glenoid baseplate loosening remains a huge concern for surgeons as it is remains the number one cause for revision surgery (Tashjian et al., 2015). When taking a biconcave, or B2, glenoid into account, higher complication rates have been reported in …
-
Development of a friction sliding system for enhanced seismic resilience of selective pallet racking systems
… chain. A novel component, the friction slipper baseplate, has been designed and developed to very significantly improve the seismic performance of a selective pallet racking system in both the cross-aisle and the down-aisle directions. This thesis documents the whole progress of the development …
-
Novel materials for heat dissipation in semiconductor technologies
… auspicious concept. A metal-matrix composite baseplate for a high performance power module using annealed pyrolytic graphite is created and evaluated. The baseplate shows a locally increased heat dissipation compared to a plain metal baseplate by 30 %. Furthermore, the thermal contact between …
-
Finite Element Analysis Of Post Vs Threaded-Post Glenoid Baseplates In Reverse Total Shoulder Arthroplasty: A Comparative Study
This study compared a standard‑post baseplate with a threaded‑post baseplate in reverse total shoulder arthroplasty (rTSA) to determine whether threaded central fixation improves micromotion and stress distribution. A finite element model of a left scapula with a commercially available rTSA system …
-
Finite Element Modeling of Shallowly Embedded Connections to Characterize Rotational Stiffness
… including embedment length, column size, baseplate geometry, concrete modulus, column orientation, cantilever height, and applied axial load. Three different connection types were investigated: a tied or one part model; a contact-based model; and a cohesive-zone based model. Cohesive-zone …
-
Assessment of remaining fatigue performance of high mast illumination poles
… and that cracking initiated at the shaft to baseplate connection, specifically at the bends of the shaft. However, no research has been conducted on the remaining fatigue life of poles after they have been in service. This thesis investigates the remaining fatigue life of a pole, removed from …
-
The model for assembly of the contractile sheath of Anti-feeding prophage (Afp)- a phage tail-like protein translocation structure
… combine to form a structure called the Tube Baseplate Complex (TBC), whereas Afp1 -Afp16 form a sheathed Afp particle of 110 nm in length. Differing from R-type pyocins and the T4 bacteriophage, Afp is comprised of three sheath proteins - Afp2, Afp3, and Afp4. Afp4 is located above the …
-
Elucidating the Function of Novel Components of Extracellular Contractile Injection Systems (eCIS)
… are required for tail elongation but not baseplate assembly. My results aligned with a previous study on Serratia entomophila eCIS, which showed that Afp14 is an eCIS-specific TMP. Furthermore, I identified Afp6 as a TMP-assembly factor. C. japonicus carries a distinct type of eCIS that …
-
Warpage Evaluation of Double-Side Cooled Power Modules with Ceramic Stiffeners
… traction inverters; however, the removal of the baseplate and the introduction of dual cooling interfaces make these structures highly sensitive to warpage and interface non-uniformity. This work experimentally investigates the relationship be tween module rigidity, warpage behavior, thermal …
-
Prediction of concrete anchor loads by finite element methods for flexible baseplates
… accuracy of predicting anchor loads for flexible baseplates by finite element analysis, tests were conducted at The University of Tennessee in the Fall of 1983. The test results are compared to the analysis by finite element methods for possible correlation. Tests were conducted on five bolt …
-
Transdermal delivery of enfuvirtide using hydrogel-forming and dissolving microneedle array patches with novel feedback systems
… a moisture-sensitive color shift in the baseplate, indicates proper patch insertion and optimal removal timing by responding to needle dissolution. Both hydrophobic and hydrophilic baseplate DMAP systems were designed, with in vitro and ex vivo studies confirming effective enfuvirtide …
-
Passive thermal management of distribution grid assets
… and found to solve for steady state baseplate temperatures under maximum load within 2°C in 0.1 seconds. The model is then modified for a specific rectilinear 1 MVA transformer augmented with three thermosiphons. The 1 MVA model is validated experimentally and found to solve for …
Page 1 of 5