Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 26 for “"batch mixer"”.

  1. A reactive melt modification of polyethylene terephthalate

    … terephthalate is followed in an intensive batch mixer by torque changes, analyzing the products for residual carboxyl content, insoluble content, and by dynamic mechanical analysis. The importance of undesirable melt degradation reactions occurring simultaneously with the …

    njit Repository record for A reactive melt modification of polyethylene terephthalate (opens in a new tab)

  2. Challenges and Opportunities with Continuous Electrode Slurry Mixing in Lithium-Ion Battery Manufacturing

    … slurry mixing compared to the traditional batch mixer for production of lithium-ion batteries. Key performance parameters such as slurry quality, operational efficiency, and production cost are evaluated to compare the two mixing systems. By drawing from scientific literature as well as …

    chalmers Repository record for Challenges and Opportunities with Continuous Electrode Slurry Mixing in Lithium-Ion Battery Manufacturing (opens in a new tab)

  3. Green Thermo-Mechano-Chemical Processing for the Recovery of Lignocellulosic Biomass Components

    … present serious safety hazards. In this work, a batch mixer process involving an ionic liquid (1-butyl-3-methylimidazolium chloride), an environmentally friendly solvent, was developed and investigated. This reactive process was explored for (1) lignin extraction from wood flour and (2) cellulose …

    waterloo Repository record for Green Thermo-Mechano-Chemical Processing for the Recovery of Lignocellulosic Biomass Components (opens in a new tab)

  4. Melt hydroperoxidation polypropylene with potential application in pollution control

    … additive free polypropylene powder with air in a batch mixer. The influence of air flow rate, temperature, mixing time and rotor RPM on the concentration of hydroperoxide groups were studied. Iodometric analysis and fourier transform infrared spectroscopic analysis were the techniques used to …

    njit Repository record for Melt hydroperoxidation polypropylene with potential application in pollution control (opens in a new tab)

  5. The kinetics of drug dissolution in polymers during hot-melt extrusion

    … extrusion conditions. In this work the Brabender Batch Mixer is utilized to determine such kinetic data at different concentrations and temperatures by connecting the exponential torque decay after the introduction of the API to the API dissolution. The time to complete the decay is then …

    njit Repository record for The kinetics of drug dissolution in polymers during hot-melt extrusion (opens in a new tab)

  6. Evaluating the Influence of Chain Branching on the Adhesion Strength between Layers in Fused Deposition Modeling

    … of PLA was carried out using an internal batch mixer with four different concentrations of chain extender. The modified PLA was processed into print filament and characterized by parallel plate rheometry and DSC. It was found that the addition of chain extender increased molecular weight …

    mcmaster Repository record for Evaluating the Influence of Chain Branching on the Adhesion Strength between Layers in Fused Deposition Modeling (opens in a new tab)

  7. Preparation of Thermoplastic Vulcanizates from Devulcanized Rubber and Polypropylene

    … Preliminary experiments were carried out in a batch mixer to compare DR and rubber crumb (CR). DR based TPVs showed better properties than CR based TPVs, however, the properties were not useful for commercial applications. Sulphur based dynamic vulcanization was studied in a batch mixer and …

    waterloo Repository record for Preparation of Thermoplastic Vulcanizates from Devulcanized Rubber and Polypropylene (opens in a new tab)

  8. Biodegradable polymer/clay nanocomposites based on poly(butylene adipate-co-terephthalate) and Polylactide

    … melt mixing in a twin-screw extruder and a batch mixer, determined the most compatible organoclay for this blend, evaluated the role of the particles on the physical properties and morphologies of the blends, compared different mixing procedures, and evaluated the effect of clay loading on …

    must-thes Repository record for Biodegradable polymer/clay nanocomposites based on poly(butylene adipate-co-terephthalate) and Polylactide (opens in a new tab)

  9. Influence of Additives on the Foamability of Potato Starch based Biopolymers

    … a twin screw extruder (TSE) and an internal batch mixer (Haake Mixer) with four different chain extenders. The modified blends were characterized by Parallel Plate Rheometry, DSC, Intrinsic Viscosity and SEM techniques. Finally, foamability of the modified blends was examined by using …

    mcmaster Repository record for Influence of Additives on the Foamability of Potato Starch based Biopolymers (opens in a new tab)

  10. Graphene Nanoplatelets Produced by Thermomechanical Exfoliation of Graphite, and their use in Polyamide Composites

    … delaminate graphite, using a lab-scale polymer batch mixer equipped with roller rotors at a set temperature of 250 oC and 150 rpm. The corresponding energy requirement is 35-60 kJ/g for an operation that lasts 90-100 minutes. Bulk characterization showed the resulting product comprises a mixture …

    queens Repository record for Graphene Nanoplatelets Produced by Thermomechanical Exfoliation of Graphite, and their use in Polyamide Composites (opens in a new tab)

  11. Polypropylene Modified by Polydimethylsiloxane in Catalytic Cross Metathesis Reactions

    … to contain silicon. Torque values used in a batch mixer for polymerizations and the remaining weight % of copolymers at 350°C were used to conduct statistical analysis, through which models used to describe the relationships between experimental factors and these physical responses were …

    waterloo Repository record for Polypropylene Modified by Polydimethylsiloxane in Catalytic Cross Metathesis Reactions (opens in a new tab)

  12. Reactive modification and crystallization behavior of foamed poly(butylene terephthalate)

    … modified using a tri-functional epoxide in a batch mixer to produce a branched structure with a higher molecular weight (MW) and a broader molecular weight distribution (MWD) as evidenced by rheological analysis. These experiments provided information on the PBT/modifier reaction kinetics. …

    njit Repository record for Reactive modification and crystallization behavior of foamed poly(butylene terephthalate) (opens in a new tab)

  13. Wheat Straw-Polypropylene Composites

    … and polypropylene (PP) were compounded in a batch mixer under a number of different thermal conditions and formulations. Fiber loading in the range from 0 to 60 wt-% was examined and the individual effects of two coupling agents (maleic anhydride modified polypropylene and maleic acid …

    waterloo Repository record for Wheat Straw-Polypropylene Composites (opens in a new tab)

  14. Reactive modification of polyesters and their blends

    … with polypropylene (PP) were melt processed in a batch mixer and continuous twin screw extruders. Modification was monitored by on-line rheology and the products were characterized primarily by off-line rheology, morphology and thermal analysis. Efforts were made to establish processing/property …

    njit Repository record for Reactive modification of polyesters and their blends (opens in a new tab)

  15. Engineered polysaccharide, Alpha-1,3 Glucan, as a Functional Filler of Rubber Composites

    … last stage of the study involved a solvent-free, batch mixer-based reactive process to carry out the reaction of ENR with glucan. In order to enhance the degree of dispersion and bonding of polar filler in a nonpolar natural rubber matrix, in situ melt grafting of epoxidized natural rubber (ENR) …

    waterloo Repository record for Engineered polysaccharide, Alpha-1,3 Glucan, as a Functional Filler of Rubber Composites (opens in a new tab)

  16. MODULARIZATION, INNOVATION AND COMPLIANCE

    … specification, separate modularized parts of the batch mixer machine (CBS) can be picked up to assemble similar units. The criteria for modularization are working voltage (440V or 690 V), functional properties (remote controlled or not remote controlled) and volumetric cement capacity. Technical …

    nus Repository record for MODULARIZATION, INNOVATION AND COMPLIANCE (opens in a new tab) Download file for MODULARIZATION, INNOVATION AND COMPLIANCE (opens in a new tab)

  17. Dynamic vulcanisation of EPDM/PP blends: effect of viscosity ratio, composition and cross-linking on morphology development

    … × 10-3 and 3.6 × 102, were prepared in a Haake batch mixer under the same operation conditions using resole/SnCl2.2H2O as cross-linking agents. The morphology of the collected samples was studied by scanning and/or transmission electron microscopy and, in the case of blends, the co-continuity …

    minho-thes Repository record for Dynamic vulcanisation of EPDM/PP blends: effect of viscosity ratio, composition and cross-linking on morphology development (opens in a new tab)

Page 1 of 2