Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 785 for “"bcc"”.
-
X-ray diffraction study of vacancies in bcc helium-3 and bcc helium-4
Submitted by Carolyn Mead (cmead2@illinois.edu) on 2011-06-13T17:02:41Z No. of bitstreams: 1 1982_granfors.pdf: 4976253 bytes, checksum: e552b132221ed1a25b853f6b916a974f (MD5)
-
The deformation of bcc alloys
<p>A detailed study has been made of thermally activated glide between 373 K and 20 K for UHV annealed single crystals of two Nb based substitutional alloy systems containing 1-16 at.%Mo or 4 - 60 at.%Ta, in conjunction with a study of the deformation of UHV annealed single crystals of Nb between …
-
Modeling deformation twinning in BCC transition metals
… deformation mechanisms in body centered cubic (BCC) transition metals, especially under low temperature and high strain rate conditions. Plastic deformation via deformation twinning has been studied for decades both experimentally and computationally however, atomic level insights such as …
-
Phase stability in ti/bcc multilayered thin films
… regime by providing a systematic study using Ti/bcc multilayered thin film architectures. The influences of lattice misfit, layer thickness, composition and chemical intermixing on the phase stability are determined. In situ thin film growth stresses of these materials are measured and correlated …
-
Deposition and characterization of magnetron sputtered BCC tantalum
… structures: 1) body center cubic (bcc) phase, characterized by high toughness and high ductility and 2) a tetragonal beta phase characterized by brittleness and a tendency to fail under stress. It was found in this work that the bcc Ta coatings on steel can be obtained reliably by …
-
Micromechanisms of Near-Yield Deformation in BCC Tantalum
New materials, optimized for increased strength, ductility, and other desirable properties, have the potential to improve every aspect of modern living. To achieve these optimums, the necessary technological advancements are impeded mainly by the limits of available material models. Innovations in …
-
High-Temperature Microstructure Evolution of Copper-BCC Metallic Composites
Nanocomposite metals have a high interface area per unit volume, resulting in high interface energy per unit volume. This elevated energy density drives microstructure changes, especially at elevated temperatures. However, the mechanisms governing these changes are not well understood. We examine …
-
Sub-Grain Characterization of Slip Activity in BCC Tantalum
BCC metals are commonly used throughout the world and understanding their deformation behavior, especially at the sub-grain level, is essential for their continued use in technological advancements. Correctly and confidently characterizing the active slip systems in BCC materials has been a …
-
Nízkoteplotní plastická deformace BCC kovů s vnitřním magnetickým uspořádáním
Přestože plastická deformace kovů s prostorově střeďenou kubickou mřížkou za nízkých teplot je dnes dobře vysvětlena, vliv vnitřního magnetického uspořádání na mechanické vlastnosti a vliv plastické deformace na vnitřní magnetické uspořádání zůstávají z větší časti nevysvětleny. Cílem této práce je …
-
First-principles studies on oxide nanoclusters in bcc Fe
… structural models for atomic clusters in bcc Fe which may contain O, Y, Ti, and vacancies (v) are investigated by Density Functional Theory (DFT) calculations. Results for clusters with identical numbers of constituents (O, Y, Ti, and v) are compared. The most important finding consists in …
-
Co-deformation of a two-phase FCC/BCC material
<p>The drive to produce materials with novel or beneficial combinations of properties has prompted research into a range of new materials and processing routes. In many applications one of the important design variables is the mechanical strength. Exceptional strengths can be achieved in certain …
-
Indentation-based micromechanical investigation of B2 intermetallics and bcc metals
… properties even further. Body-centred-cubic (bcc) metals usually display higher melting points than fcc metals, as well as being lower cost, and could potentially outcompete them for high temperature applications. Recently, a new class of alloys using bcc metals has been proposed, termed …
-
Diffusion of Titanium and Niobium in Bcc Titanium - Niobium Alloys
Made available in DSpace on 2015-05-13T15:22:15Z (GMT). No. of bitstreams: 2 license.txt: 4848 bytes, checksum: 96035ab3f5e1c23cc7138a224ce498bd (MD5) 7913578.PDF: 1944553 bytes, checksum: 026e51f1b2f56552f5cbf752d5ed855a (MD5) Previous issue date: 1978
-
Phase Stability and Mechanical Behavior of BCC Refractory High Entropy Alloys
… temperature while the remaining two (Nb, Ta) are BCC. In contrast, all the elements in VNbMoTaW have the BCC structure. Phase stability was assessed after isothermal aging at 800°C, 1000°C, and 1200°C for times of 72 to 7200 h. It was found that some compositions have an island of instability at …
-
3D Interface-Driven Mechanical Response of Titanium-Niobium HCP/BCC Nanocomposites
… investigates the fully crystalline HCP/BCC system Ti/Nb to isolate the role of a crystalline graded interface, combining physical vapor deposition, atom probe tomography, four-dimensional scanning transmission electron microscopy with machine-learning based diffraction indexing, …
-
Helium Trapping, Transport, and Outgassing via Interfaces in Cu-BCC Nanocomposites
… cubic (FCC) and body-centered cubic (BCC) metals. The high density of interfaces (grain and phase boundaries) in these nanocomposites can mitigate He implantation damage by acting as sinks for point defects and defect clusters. Current literature focuses on tuning the microstructure of …
Page 1 of 40