Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 46 for “"bend angle"”.

  1. Relationships between MIBANT bend angles and selected material properties of pallet fasteners

    … to relate the dynamic yield strength and MIBANT bend angle of driven steel fasteners. Static yield strength values for pallet nails were found to values (p > 0.0001 be linearly related to the dynamic 2 and R² = 0.950) and hence MIBANT bend angles. Static yield strength values were also related to …

    vt Repository record for Relationships between MIBANT bend angles and selected material properties of pallet fasteners (opens in a new tab)

  2. USING SINGLE MOLECULE TECHNIQUES TO DETERMINE THE MECHANISM OF DNA TOPOLOGY SIMPLIFICATION BY TYPE IIA TOPOISOMERASES

    … proposed. This thesis tests two of these, the bend angle and kinetic proofreading models, using single-molecule techniques. The bend angle model postulates that non-equilibrium topology simplification scales with the bend angle imposed on the G-segment DNA by a type IIA topoisomerase. To test …

    maryland Repository record for USING SINGLE MOLECULE TECHNIQUES TO DETERMINE THE MECHANISM OF DNA TOPOLOGY SIMPLIFICATION BY TYPE IIA TOPOISOMERASES (opens in a new tab)

  3. A COMPUTATIONAL STUDY OF CURVATURE IN THE OUTFLOW GRAFT OF A CONTINUOUS FLOW LEFT VENTRICULAR ASSIST DEVICE

    … geometry, as measured by radius of curvature, bend angle, and diameter, on thrombogenic flow patterns within the graft for a range of flow conditions. It also examines the effect blood properties, including viscosity and density, on these flow patterns. The results indicated that radius of …

    vcu Repository record for A COMPUTATIONAL STUDY OF CURVATURE IN THE OUTFLOW GRAFT OF A CONTINUOUS FLOW LEFT VENTRICULAR ASSIST DEVICE (opens in a new tab)

  4. Effects of Friction Stir Welding on Polymer Microstructure

    … extruded polypropylene sheet. Three-point bend tests were used to determine the ultimate flexural strength and coincident strain. The maximum bend angle before failure was used to label the welds as "good or bad." An optical microscope capable of cross polarization was used to examine and …

    byu Repository record for Effects of Friction Stir Welding on Polymer Microstructure (opens in a new tab) Download PDF for Effects of Friction Stir Welding on Polymer Microstructure (opens in a new tab)

  5. Influence of austenitizing parameters on mechanical behavior of press hardened steels

    … double edge notch tensile testing, and free bend testing. Metrics, such as notch tensile strength, notch strength ratio, and notch displacement, which is based on the fracture mechanics parameter crack tip opening displacement, were derived from double edge notch tensile testing to assess …

    colo-mines Repository record for Influence of austenitizing parameters on mechanical behavior of press hardened steels (opens in a new tab)

  6. Bending Of Metallic Thin Foil Via High Energy Pulsed Laser Peening

    … ratio, and number of scan tracks on bend angle, is discussed. Mechanisms ofLPF are reviewed by elucidating the mechanics of convex and concave curvature.Particularly, the Stress Gradient Mechanism (SGM) and the Stress Bending Mechanism(SBM), are modeled. In addition, the effect that …

    unr Repository record for Bending Of Metallic Thin Foil Via High Energy Pulsed Laser Peening (opens in a new tab)

  7. TATA -binding protein recognition of DNA promoters and TFIIA interactions with TBP -DNA complexes: Kinetic and thermodynamic studies

    … AdMLP binding between the hTBP and yTBP. The DNA bend angle in hTBP-AdMLP was markedly greater than for the corresponding yeast complex. The movement of the N-terminal domain of yTBP bound to AdMLP was also studied. Movement of the TBP N-terminal domain was synchronous with changes in DNA …

    nebraska Repository record for TATA -binding protein recognition of DNA promoters and TFIIA interactions with TBP -DNA complexes: Kinetic and thermodynamic studies (opens in a new tab)

  8. Numeric Modelling of Water Hammer Effects in Penstocks

    … pipe segments to quantify the influence of the bend angle on the results. A second comparative analysis is performed on a horizontally bent segment buried in soil to determine the influence of the pipe interaction with the soil on the response. It is observed that the thickness, span, initial …

    ottawa-retro Repository record for Numeric Modelling of Water Hammer Effects in Penstocks (opens in a new tab)

  9. Channel Meander Migration in Large-Scale Physical Model Study

    … the ratio of curvature to channel width, bend angle, and the Froude number were tested in the experiments. The effect of each factor on the evolution of channel plan form was evaluated and quantified. The channel bankline displacement was modeled by a hyperbolic function with the inclusion …

    tamu Repository record for Channel Meander Migration in Large-Scale Physical Model Study (opens in a new tab)

  10. Synthesis of novel liquid crystalline materials

    … of liquid crystals characterised by a molecular bend, typically introduced through 1,3-disubstituted central units. With this bend angle comes new liquid crystal mesophases unique to these structures. <br/><br/><i>Thesis is embargoed until 31 July 2027.</i>

    qu-belfast Repository record for Synthesis of novel liquid crystalline materials (opens in a new tab) Embargoed until 2027-07-31

  11. DNA target site recognition by the Ll.LtrB group II intron RNP

    … must be bent. I have dissected the role of DNA bending in the intron mobility pathway and found that the DNA is bent at two progressively larger angles as the reaction proceeds. The predominant bend angle at earlier time points places the bottom-strand DNA cleavage site at the protein …

    texas Repository record for DNA target site recognition by the Ll.LtrB group II intron RNP (opens in a new tab)

  12. Bipolimeriniai mikrodariniai stiklo kanaluose, realizuoti trimatės lazerinės litografijos metodu /

    … several different polymer precursors, capable of bending duo to material-solvent interaction (swelling or shrinking), 3DLL is ideal for the production of bipolymeric structures. During this experimental work, two polymeric substances were used to form bipolymeric microstructures in glass channels: …

    vilnius Repository record for Bipolimeriniai mikrodariniai stiklo kanaluose, realizuoti trimatės lazerinės litografijos metodu / (opens in a new tab)

  13. Investigation of Protein-DNA Contacts in the Saccharomyces Cerevisiae RNA Polymerase III Recruitment Factor (TFIIIB) Complex and Effects of Promoter Topology on Transcription

    … sequence TATAa/tAa/tN) and induces an ~80° bend in the DNA. To achieve recruitment of Saccharomyces cerevisiae RNA polymerase III, TBP is associated with two additional factors, Brf1 and Bdp1, to form initiation factor TFIIIB. This study focuses on interactions between the proteins and DNA …

    lsu-thes Repository record for Investigation of Protein-DNA Contacts in the Saccharomyces Cerevisiae RNA Polymerase III Recruitment Factor (TFIIIB) Complex and Effects of Promoter Topology on Transcription (opens in a new tab)

  14. Design and Testing of a Biomimetic Pneumatic Actuated Seahorse Tail Inspired Robot

    … actuation was observed to determine its maximum bending capacities. The results of the experiments revealed that the miniature McKibben muscles performed comparably to larger sized McKibben muscles previously reported in literature. The pneumatically actuated robot achieved a maximum bend angle …

    clemson Repository record for Design and Testing of a Biomimetic Pneumatic Actuated Seahorse Tail Inspired Robot (opens in a new tab)

  15. Laser-initiated Coulomb explosion imaging of small molecules

    … larger molecules. Physical parameters such as bend angle and bond lengths are extracted from the data and are qualitatively described using an enhanced ionization model that predicts the laser intensity required for ionization as a function of bond length using classical, over the barrier …

    waterloo Repository record for Laser-initiated Coulomb explosion imaging of small molecules (opens in a new tab)

  16. Submerged vane performance in strongly curved narrow channel bends.

    … of 1 to 4 times their height, and are typically angled between 5 and 30 degrees to the free-stream flow direction (counterclockwise, when viewed in plan, in a bend turning to the right). The vanes induce a secondary current which may be harnessed to counteract the centrifugally-induced helicoidal …

    ottawa-retro Repository record for Submerged vane performance in strongly curved narrow channel bends. (opens in a new tab)

  17. Flow Circulation Control Within a Geometrically Adaptive Aggressive Offset Diffuser

    … impact of varying combinations of diffuser bend angle and radius. In combination with numerical simulations, the base flow is determined as a sum of various vortical concentrations for which a unique flow control approach is developed to mitigate the evolution of these vortices, thereby …

    gatech Repository record for Flow Circulation Control Within a Geometrically Adaptive Aggressive Offset Diffuser (opens in a new tab)

  18. INSPACE BENDING OF MULTISTABLE BOOMS

    … the rolled and deployed configuration: the “Bend Bistability”. For this purpose, an ‘S’-shaped tape spring structure was designed to show local bistability in both rotation directions (clockwise & counterclockwise). The thesis discusses the finite element analysis (FEA) of various glass fiber …

    cornell Repository record for INSPACE BENDING OF MULTISTABLE BOOMS (opens in a new tab)

  19. Anisotropy of strength and fracture behavior in Al-Mg-Si-(Mn) extrusion alloys

    … measured from uniaxial tensile and VDA bend tests with the microstructure. The characterization of microstructure and crystallographic texture was done using scanning electron microscopy and electron back scatter diffraction. The mechanical anisotropy was measured by tensile and VDA bend …

    ubc Repository record for Anisotropy of strength and fracture behavior in Al-Mg-Si-(Mn) extrusion alloys (opens in a new tab) Download PDF for Anisotropy of strength and fracture behavior in Al-Mg-Si-(Mn) extrusion alloys (opens in a new tab)

  20. Performance Modeling of Supercritical Carbon Dioxide Zigzag-Channel Printed Circuit Heat Exchangers

    … data analysis is primarily driven by channel bend angle (��) for zigzag-channel designs and by mass flow rate (��̇ ) for straight-channel designs. The non-uniform staged integral method was of limited use for zigzag-channel heat exchangers operating near the critical point. The method was …

    unlv Repository record for Performance Modeling of Supercritical Carbon Dioxide Zigzag-Channel Printed Circuit Heat Exchangers (opens in a new tab) Download PDF for Performance Modeling of Supercritical Carbon Dioxide Zigzag-Channel Printed Circuit Heat Exchangers (opens in a new tab)

Page 1 of 3