Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 130 for “"bend test"”.

  1. Formability Characterization of Sheet Metals using the Angular Stretch Bend Test

    … the mechanics of the angular stretch bend test (ASBT) and analytical models using three different advanced high strength steels (AHSS) and finite element simulation. The three steels, 590R, 3rd Gen 1180, and DP980 were characterized using the ASBT. The accuracy of models from the …

    waterloo Repository record for Formability Characterization of Sheet Metals using the Angular Stretch Bend Test (opens in a new tab)

  2. Low-temperature fracture behavior of asphalt concrete in semi-circular bend test.

    … a) extrapolation of small-scale laboratory testing results to full-scale design, and b) identification of material fracture properties. In this research work, laboratory experiments and numerical simulations were conducted to investigate the size effect of asphalt concrete tested in …

    umn Repository record for Low-temperature fracture behavior of asphalt concrete in semi-circular bend test. (opens in a new tab)

  3. Reducing Measurement Error in Three-Point Bend Test Using Linear Gradient Correction Model

    … navigation and pushability. Standard three-point bend analysis (assuming uniform stiffness) yields inaccurate apparent rigidity (B0) for these graded devices, especially in transition zones. This inaccuracy hinders device comparison, clinical selection, and predictive modeling. This thesis …

    wustl Repository record for Reducing Measurement Error in Three-Point Bend Test Using Linear Gradient Correction Model (opens in a new tab)

  4. Interfacial fracture energy (bonding strength) of laser deposited H13 tool steel on H13 tool steel substrate using four point bend test

    … cladding/substrate system. For this four point bend test based on linear elastic fracture mechanics (LFEM) was carried out. Strain energy release rate, Gss which is closely related to bond strength of the interfacial region and the stress intensity factor, Kc were computed for this particular …

    must-thes Repository record for Interfacial fracture energy (bonding strength) of laser deposited H13 tool steel on H13 tool steel substrate using four point bend test (opens in a new tab)

  5. Finite Element Analysis of Bending in High-Strength Steels

    … this project aims to understand and improve the bendability of various steel grades, starting with Dual-Phase DP 980. To do this we have modeled 90° sheet metal bending in the common VDA V-Bend test and 3-point bend test configurations respectively. This modeling effort is undertaken using the …

    mcmaster Repository record for Finite Element Analysis of Bending in High-Strength Steels (opens in a new tab)

  6. Fracture Toughness Testing of Plastics under Various Environmental Conditions

    The primary objective of this study is to test the applicability to plastics of a fracture toughness testing tool developed for metals. The intent is to study pre-test conditioning of several plastic materials and the effect of the depth of the razor notch cut in the chevron notched fracture …

    unt Repository record for Fracture Toughness Testing of Plastics under Various Environmental Conditions (opens in a new tab)

  7. Evaluating cracking performance of polymer enhanced and fiber reinforced microsurface mixtures using asphalt laboratory testing

    … mixtures using common asphalt laboratory testing. A preliminary optimal timing study and a study to evaluate improvements to cracking performance were conducted. The control mixture was based on NJDOT standard mix design specifications. Three mixtures were tested in this study: a fiber …

    rowan Repository record for Evaluating cracking performance of polymer enhanced and fiber reinforced microsurface mixtures using asphalt laboratory testing (opens in a new tab)

  8. Adhesion Comparison of Low Dielectric Constant Thin Films Using Four Point Bend and Nanoscratch Testing

    … thin films. In this thesis the four point bend test and nanoscratch test method was used for evaluating adhesion of boro-phosphate-silicate glass (BPSG) and tetraethylorthosilicate (TEOS) low-k thin films to silicon subtrates. Nanoindation tests were also performed on the low-k films to …

    usf Repository record for Adhesion Comparison of Low Dielectric Constant Thin Films Using Four Point Bend and Nanoscratch Testing (opens in a new tab)

  9. The Effect of Austenitization Temperature on the Microstructure, Bend Properties, and Hardness of a Chrome-Bearing White Cast Iron

    … of chrome-bearing white irons and add bend test data to the literature concerning chrome-bearing white irons. This project was intended to support an existing line of research into cast metal-ceramic lattices using chrome white iron as a substitute for sintered ceramic tiles used to …

    vt Repository record for The Effect of Austenitization Temperature on the Microstructure, Bend Properties, and Hardness of a Chrome-Bearing White Cast Iron (opens in a new tab)

  10. Mechanical and Fracture Behavior of Additively Manufactured Carbon Fiber Reinforced Polymer Composites with Bouligand Mesotrstructure

    … manufactured continuous CFRP composites. 3-point bend test was conducted to characterize the flexural properties such as flexural modulus, strength, and energy absorption. Single edge notch bend test was utilized to quantitively characterize the mode I fracture toughness and effective fracture …

    ucf Repository record for Mechanical and Fracture Behavior of Additively Manufactured Carbon Fiber Reinforced Polymer Composites with Bouligand Mesotrstructure (opens in a new tab)

  11. Investigation of additively manufactured polymer and transparent polymer composites

    … material's high heat resistance. A three-point bend test is performed for flexure properties while a single edge notch bend test is performed for fracture toughness. For each of the tests, the build parameters are investigated through a full-factorial design of experiments with results including …

    must-thes Repository record for Investigation of additively manufactured polymer and transparent polymer composites (opens in a new tab)

  12. The effect of production variables on the properties and performance of ingot mould cast iron.

    … of cast iron by conventional mechanical tests. It has been established that a three point bend test may be used to rank irons of different microstructure in terms of cracking susceptibility.Experimental test block material has been produced and the effect of various production practices …

    sheffield-hallam Download PDF for The effect of production variables on the properties and performance of ingot mould cast iron. (opens in a new tab)

  13. On the Influence of the Through-Thickness Strain Gradients for Characterization of Formability and Fracture of Sheet Metal Alloys

    … In this thesis, novel out-of-plane formability tests were designed and performed to investigate the correlation between the severity of bend and material formability. Three deformation modes considered in the research: a pure bending under plane strain, equi-biaxial stretching with severe …

    waterloo Repository record for On the Influence of the Through-Thickness Strain Gradients for Characterization of Formability and Fracture of Sheet Metal Alloys (opens in a new tab)

  14. Laboratory Comparison of Full Depth Reclamation Stabilization Techniques Using Arkansas Field Materials

    … use of these mix designs in Arkansas. Initial testing to determine mix properties were performed, which included determination of gradation, Atterberg limits, and sand equivalency testing. Optimal stabilizer contents were determined using the indirect tensile strength test for asphalt emulsion …

    arkansas Repository record for Laboratory Comparison of Full Depth Reclamation Stabilization Techniques Using Arkansas Field Materials (opens in a new tab)

  15. Damage Evolution and Failure Mechanism in Flexible, Printed Conductors under Monotonic and Cyclic Bending

    … include monotonic and cyclic stretching, bending, twisting, and combined deformations under practical operating conditions. Compared to traditional “rigid” electronics, flexible electronics undergo much larger deformations. Therefore, it is essential to identify the electromechanical …

    gatech Repository record for Damage Evolution and Failure Mechanism in Flexible, Printed Conductors under Monotonic and Cyclic Bending (opens in a new tab)

  16. An Investigation of a Vertical Test Method for Large Deformation Bending of High Strain Composite Laminates

    … Thin composite structures subjected to large bending deformations often attain significantly higher strain-to-failure than previously anticipated tensile and compression coupon test data and linear material model assumption predict. At NASA Langley Research Center, a new bend test method is …

    washington Repository record for An Investigation of a Vertical Test Method for Large Deformation Bending of High Strain Composite Laminates (opens in a new tab)

  17. Improved process procedures for upgrading and repair of high alloy and stainless castings

    … materials.</p> <p>Extensive pitting corrosion testing per ASTM G 48 - 92 and intergranular corrosion testing per ASTM G 28 - 95 Method A were performed. All intergranularly corrosion tested samples were subjected to a 2t radius bend test. Weldability tests were carried out per ASTM A 494 - 94. …

    ut-knoxville Repository record for Improved process procedures for upgrading and repair of high alloy and stainless castings (opens in a new tab)

  18. Hydrogen Embrittlement of A High Strength Low Alloy Pipeline Steel

    … alloy (HSLA) pipeline steel using a four point bend test. Hydrogen was introduced into single V-notched test samples by a standard BP method. Slow bend tests were conducted on both the base metal and on the heat affected zone (HAZ) of a commercially welded plate. It was found that hydrogen …

    mcmaster Repository record for Hydrogen Embrittlement of A High Strength Low Alloy Pipeline Steel (opens in a new tab)

  19. Lamellar tearing susceptibility evaluation

    The through thickness tensile test, the compression test, the slice-bend test and the Lehigh lamellar tear test were employed to evaluate the sensitivity of several constructional steels to lamellar tearing and to assess the viability of the test methods for predicting lamellar tearing. Ultrasonic …

    ut-knoxville Repository record for Lamellar tearing susceptibility evaluation (opens in a new tab)

  20. Biomechanical Characterization of Dental Composite Restoratives - A Micro-Indentation Approach

    … the depth-sensing indentation method as a single test platform for determining the mechanical properties of dental composite restoratives. A customized indentation head that was capable of measuring the load and displacement with high accuracy was developed. The depth-sensing indentation protocol …

    nus Repository record for Biomechanical Characterization of Dental Composite Restoratives - A Micro-Indentation Approach (opens in a new tab) Download file for Biomechanical Characterization of Dental Composite Restoratives - A Micro-Indentation Approach (opens in a new tab)

Page 1 of 7