Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 35 for “"bendability"”.
-
Effect of decarburization on the bendability of martensitic steel, The
… often subject to bending. Therefore, improved bendability could allow for more effective application of martensitic steels. This study determined the effect of decarburization on the bendability of cold rolled martensitic (CRM) 1500 and press hardenable steel (PHS) 2000, with the numeric …
-
BENDING CHARACTERISTICS AND STRETCH BENDABILITY OF MONOLITHIC AND LAMINATED SHEET MATERIALS
… harder AA2024 core material. An improved stretch bendability limit strain of 0.24 for Alclad 2024 tri-layer specimen was predicted by utilizing the major strain acceleration criterion. The thin AA1100 protective layer produced a positive effect on the stretch bendability of Alclad 2024 when …
-
The effect of PCG layer thickness on bendability of aluminum extrusion alloys
… applications to reduce the vehicle weight. Bendability (i.e. how much bending the material can sustain without cracking) is an important material property, both for the forming of components and in crash behavior. During the production of Al-Mg-Si extrusion alloys (AA6082 non- …
-
NUMERICAL STUDY OF ANISOTROPY AND DUCTILITY ENHANCEMENT IN SHEET METALS
… the growth and coalescence of microvoids. Thus, bendability is significantly enhanced by superimposing hydrostatic pressure. The effect of hydrostatic pressure on tensile test simulation is determined and compared with that obtained under bending. This test is simulated under the plane strain …
-
Materials Strategies and Devices for Flexible and Stretchable Electronics
… electronic devices with the simple mechanical bendability described above, not to mention conventional wafer-based device technologies, have clear limitations in certain applications on irregular and rugged surfaces, such as those on a wearable computer or various personal health sensing …
-
Microstructural Mechanics of Ductile Fracture
… and location of unintended inclusions on the bendability of dual-phase steels are quantified through microstructure-based finite element calculations. Here as well, several features of ductile fracture of dual-phase steels under bending observed in experiments, naturally emerge in these …
-
Highly Flexible Yet Hard Transparent Omniphobic Coating Reinforced with an Electrospun Nylon Nanofiber Mat
… to a curvature radius < 1 mm, it has limited bendability on the outer surface of a bending PET film, which limits the application of this coating on the touchscreen of foldable smartphones. My thesis research is aimed at solving this bendability challenge, by reinforcing a GPOSS-g-FC6 coating …
-
Material Processing and Forming Approaches for Enhancing Room Temperature Formability of Automotive Mg Sheet
… to improve its room temperature ductility and bendability (and, more generally, formability). The sheet re-processing studies for formability improvement were carried out by two different methods, (i) cyclic bending-unbending and annealing (or CBUA) and (ii) wire brushing and annealing (or …
-
Insertion site similarities in the Tc1/mariner element family
… 1998). Through this comparison we found that bendability, protein-induced deformability and A-philicity are the most significant for determining insertion site preference. We further examined Tn5 and Tyl insertion sites and found that Tn5 shares similarities with the Tcl/mariner elements …
-
LARGE DEFORMATION BEHAVIOR OF CAST A356 ALUMINUM ALLOY UNDER UNIAXIAL TENSION, COMPRESSION AND V-BENDING
… showed significant improvement in ductility and bendability, whereas the differences in compression were not appreciable. In addition to Sr addition, Ti was also added as a grain refiner to the alloys at three different levels to obtain microstructures with different grain sizes. The results in …
-
Theoretical and experimental studies of bending/stretching of inorganic electronic materials printed on plastic substrates and their practical applications
… has been not studied well and the degree of bendability has simply defined by the bend radius at which the strain reaches some substantial fraction of a fracture strain (e.g., ~1 %) in a typical inorganic film. This thesis has been focused on the fundamental scientific studies necessary to …
-
Processing, Mechanical Properties and Elevated Temperature Formability of Automotive AA6xxx and AA7xxx Sheet Materials with High Recycle Content
… Formability is studied in terms of sheet bendability and elevated temperature forming limit diagrams (FLDs) using a hot gas bulge tester.
-
Graphene field effect transistors for high performance flexible nanoelectronics
… device structure for high-mobility and high-bendability is suggested with experimental comparison among diverse structures including top-gate GFETs (TG-GFETs), single/multi-finger embedded-gate GFETs with high-k dielectrics (EG-highk/GFETs), and embedded-gate GFETs with hexagonal boron …
-
On the Influence of the Through-Thickness Strain Gradients for Characterization of Formability and Fracture of Sheet Metal Alloys
… has reliable and intuitive test parameters for bendability analysis. In contrast to the most of traditional formability tests in which in-plane stretching is the dominant failure mode, the VDA bend is designed to investigate material response under the pure bending condition in which the most …
-
Finite Element Analysis of Bending in High-Strength Steels
… this project aims to understand and improve the bendability of various steel grades, starting with Dual-Phase DP 980. To do this we have modeled 90° sheet metal bending in the common VDA V-Bend test and 3-point bend test configurations respectively. This modeling effort is undertaken using the …
-
Use of bioinformatics to investigate and analyze transposable element insertions in the genomes of caenorhabditis elegans and drosophila melanogaster, and into the target plasmid pGDV1
… regions of DNA with a relatively high degree of bendability/flexibility at the insertion site. However, similar trends were not observed for the Tc1, Mos1 or piggyBac transposons. Hence, it is believed that the secondary structural features of DNA can contribute to target site preference for …
-
Influence of Testing Configuration and Microstructure on the Deformation Behaviour of Advanced High Strength Steels in Bending
… configuration and microstructure influence the bendability of AHSS, offering insights to optimize formability, improve springback prediction accuracy, and support broader industrial implementation.
-
The effects of exogenous application of abscisic acid and α,α'-dipyridyl on cold acclimation and physical characteristics of Pisum sativum 'Alaska' seedlings
… decreased freezing injury (30% at -6°C). Stem bendability was not correlated with freezing resistance. ABA treated peas grown in the dark had reduced growth rates and increased stem rigidity, but exhibited greater injury at -6°C than untreated dark grown peas. Extensin content was not related …
-
Mechanism of DNA binding of an unusual bacterial transcription regulator.
… pattern of alternating regions of high and low bendability that generates intrinsic curvature in the DNA in the correct direction to facilitate GabR binding. Thus, both direct readout mechanisms involving the contacts of the helix-turn-helix domains with the bases in the repeat sequences and …
Page 1 of 2