Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 15 of 15 for “"bi-material interface"”.
-
Fracture mechanics of bi-material interface cracks
… isotropic two dimensional deformation field exhibits an inverse square root singularity. The nature of the stress singularity at the tip of a plane crack terminating at an interface of two materials is, however, dependent on both the crack geometry and the elastic constants of the two materials. …
-
Numerical homogenization of a rough bi-material interface
The mechanical reliability of electronic components has become harder and harder to predict due to the use of composite materials. One of the key issues is creating an accurate model of the delamination mechanism, which consists in the separation of two different bounded materials. This phenomenon …
-
The Role of Bi/Material Interface in Integrity of Layered Metal/Ceramic
… investigation focused on the characterisation of materials involved in Solid Oxide Cell technology. The main topic of investigation was the ceramic cell, also known as MEA. Particular attention was given to the role that bi-material interfaces, co-sintering effects and residual stresses play in …
-
Effects of Defects on Composite Structures Load Carrying Capacity: Delaminations at a Bi-Material Interface
… zaměřena na delaminace na rozhranní dvou různých materialů. Lomová houževnatost byla experimantálně měřena ve třech typech zatížení za účelem stanovení poruchového kritéria založeného na podílu módu I a módu II. Během tohoto experimentu byla vyvinuta nová metoda měření délky trhliny pomocí …
-
Explorative study for stochastic failure analysis of a roughened bi-material interface: implementation of the size sensitivity based perturbation method
… is expanding all over the world, their reliability and miniaturization have become very crucial. The thesis is based on the study of one of the most frequent failure mechanisms in semiconductor packages, the delamination of interface or the separation of two bonded materials, in order to …
-
Combined loading fracture trajectories of viscoelastic materials.
… crack elongation. Fracture testing included combined displacement loadings both of single and bi-material specimens with initial cracks located in each material and at the bi-material interface. The feasibility of trajectory prediction using an elastic linear-strain finite-element analysis was …
-
Dynamic delamination of patterned thin films
… fracture toughness of the thin film/substrate interface. The testing method involves using a laser-induced acoustic stress wave to load the film/substrate fracture plane in tension at very high strain rate (~10^7/s) leading to the inertia-driven interface delamination. A weak adhesive layer is …
-
Mechanism of Fatigue Crack Growth at Polymer/metal Interface
Fatigue crack growth along an Al/epoxy interface was examined under mixed-mode conditions. To provide different combinations of Mode-I and Mode-II conditions, a flexural peel (FP) technique was developed, which proved to be particularly useful for subcritical crack growth studies. Using this …
-
Characterisation and Modelling of Crystallisation Kinetics and Interface strength for PEEK and LMPAEK: A Tale of Crystallisation and Interfaces
… thermal histories. Predicting adhesion and interface bond strength in 3-dimensional thermoplastic composite parts face challenges due to lack of robust design tools. Recent research presents new methods to predict interface strength, taking temperature and crystallization into account. …
-
Interface Fracture in Masonry Composites: A Lattice Approach
The brick-mortar bond or interface is often the weakest link in the masonry composites. The localization of fracture processes at this bi-material interface plays an important role in the failure of this assemblage. These micro-level fracture processes control the nonlinear behavior of the …
-
Elastic-plastic interfacial crack problems
… of a stationary crack in a homogeneous isotropic material under mixed-mode loading have been constructed analytically. Without loss of generality the fields are taken to comprise elastic and plastic sectors. Slip line solutions have been developed for the plastic sectors and semi-infinite elastic …
-
Popis porušování vrstevnatých polymerních prostředí
… napětí, kterou lze vyjádřit pomocí kritérií stability. V závěru práce je ukázáno, že za určitých podmínek (především v závislosti na elastických konstantách jednotlivých materiálů) existence materiálového rozhraní pozitivně ovlivňuje životnost vícevrstvého tělesa.
-
Problém trhliny v blízkosti bimateriálové rozhraní
… nakloněné pod libovolným úhlem vzhledem k bimateriálovému rozhraní. Dále se určuje koeficient intenzity napětí analyticko-numerickým přístupem pomocí MKP. Poslední, třetí část, je zaměřena na testování algoritmů na konkrétních konfiguracích trhliny vůči bimateriálovému rozhraní. V závěru se …