Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 24 for “"bio-printing"”.

  1. BIO-PRINTING OF MULTI-HYDROGEL SCAFFOLDS FOR TISSUE ENGINEERING

    … design. In this dissertation, a multi-hydrogel bio-printing system based on a novel multi-nozzle design was developed to fabricate complicated three dimensional scaffolds directly for tissue engineering application. In comparison with previous methods, this system can flexibly fabricate hydrogel …

    nus Repository record for BIO-PRINTING OF MULTI-HYDROGEL SCAFFOLDS FOR TISSUE ENGINEERING (opens in a new tab) Download file for BIO-PRINTING OF MULTI-HYDROGEL SCAFFOLDS FOR TISSUE ENGINEERING (opens in a new tab)

  2. Designing Bio-Ink for Extrusion Based Bio-Printing Process

    … physiological behavior. Three-dimensional (3D) bio-printing is an emerging technology to reproduce living tissue through controlled allocation of biomaterial and cell. Due to its bio-compatibility, natural hydrogels are commonly considered as the scaffold material in bio-printing process. …

    ndsu Repository record for Designing Bio-Ink for Extrusion Based Bio-Printing Process (opens in a new tab)

  3. JET INSTABILITY AND DROPLET FORMATION FOR BIO-PRINTING APPLICATIONS

    … has been gaining attention due to its highly bio-compatible nature. Solutions of sodium alginate were used as the ink material and in some cases compared with an equivalent Newtonian fluid (same zero-shear viscosity). The droplets were inspected in one of two ways: 1) allow the alginate …

    clemson Repository record for JET INSTABILITY AND DROPLET FORMATION FOR BIO-PRINTING APPLICATIONS (opens in a new tab)

  4. Optimizing the tissue engineering of tubular organ structures by bio-printing

    … self-assembly we employ the technology of bioprinting. To maintain the extended cellular assemblies, they need to be vascularized. Thus we first concentrated on the fabrication of blood vessels. We prepared convenient bioink particles, multicellular units composed of the relevant cell types …

    missouri Repository record for Optimizing the tissue engineering of tubular organ structures by bio-printing (opens in a new tab)

  5. In vitro and in vivo 3D (Bio)Printing for Treatment of Musculoskeletal Injuries

    … of PCL-based materials allowed low-temperature printing to avoid overheating of the surrounding tissues. The in situ printed scaffolds showed moderate adhesion to wet bone tissue, which can prevent scaffold dislocation. The printed scaffolds showed to be osteoconductive and supported the …

    nebraska Repository record for In vitro and in vivo 3D (Bio)Printing for Treatment of Musculoskeletal Injuries (opens in a new tab)

  6. Identification of processing parameters for the preparation of dECM-based resins for 3D (bio)printing

    This thesis advances the field of bioprinting and tissue modeling by addressing the limitations of current processing protocols for dECM-based bioresins. It explores effective enzymes for thermogelling dECM pre-gels, investigates the grafting of different methacryloylated groups on dECM for vat 3D …

    fu-berlin Repository record for Identification of processing parameters for the preparation of dECM-based resins for 3D (bio)printing (opens in a new tab)

  7. MULTI-MATERIAL BIO-PRINTIG FOR NASAL OSTEOCHONDRAL TISSUE ENGINEERING

    … the nasal osseocartilaginous interface region. Bio-printing is an emerging TE method that can fabricate constructs with precise placement of multiple bio-inks to create 3D multi-material TE constructs. However, such methods rely on sequentially adding bio-inks, resulting in discontinuity between …

    nus Repository record for MULTI-MATERIAL BIO-PRINTIG FOR NASAL OSTEOCHONDRAL TISSUE ENGINEERING (opens in a new tab) Download file for MULTI-MATERIAL BIO-PRINTIG FOR NASAL OSTEOCHONDRAL TISSUE ENGINEERING (opens in a new tab)

  8. Construction and Implementation of a Novel Tendon-Driven Continuum Robot for a Bio Processing Application

    … surgeries, search and rescue missions, and bio-printing scaffolds. Some of the benefits from continuum robotics include inherent redundancy, flexibility, and the ability to path plan around objects. This thesis aims to explore the development and usage of a novel continuum robot in a bio …

    gatech Repository record for Construction and Implementation of a Novel Tendon-Driven Continuum Robot for a Bio Processing Application (opens in a new tab)

  9. Parameters design and the operation simulation of a pneumatic dispensing system for biomaterial 3D printing

    … engineering and materials to improve or replace biological functions of native tissues or organs. Fabricating scaffolds is a vital process in TE for the mechanical support of the cells proliferation with desired functions and intricate structures. A pneumatic dispensing system of 3D printing is …

    manitoba Repository record for Parameters design and the operation simulation of a pneumatic dispensing system for biomaterial 3D printing (opens in a new tab)

  10. Video-Enabled Vibration Analysis for In-Process Monitoring in Extrusion-based 3D Bioprinting

    … day by day, which accelerated the interest in 3D bio-additive manufacturing. This method offers a promising solution to the growing demand for transplants by enabling fabrication of complex human organs and tissue models in the laboratory settings using biocompatible material. However, ensuring …

    gsu Repository record for Video-Enabled Vibration Analysis for In-Process Monitoring in Extrusion-based 3D Bioprinting (opens in a new tab)

  11. Applications of 3D printing in bioprocessing engineering

    <p>This thesis delves into the advancements in 3D printing technology and its application in tissue engineering and regeneration. It specifically explores the integration of 3D printing into bioprocessing engineering, covering the design and simulation of micro-fluidised bed bioreactors, the …

    oxford Restricted access

  12. Configuration of Modular Scaffolds for Craniomaxillofacial Regeneration: A Computational Approach

    … This thesis builds off previous work in 3D bio-printing and the development of a modular scaffolding system for craniomaxillofacial regeneration and presents a computational shape fitting model for use with these technologies in a clinical setting. Presented is an evolutionary model which …

    oregon Repository record for Configuration of Modular Scaffolds for Craniomaxillofacial Regeneration: A Computational Approach (opens in a new tab)

  13. MULTI-INK 3D PRINTING OF UV-CURABLE SILICONES

    … is the production of patient-specific silicone bio-implants where the stiffness of the material may not be homogenous over the entire part. 3D printing technology is well suited for construction of such custom parts. However, current 3D printing methods for silicone are not capable of printing …

    mcmaster Repository record for MULTI-INK 3D PRINTING OF UV-CURABLE SILICONES (opens in a new tab)

  14. 3D Bioprinting of multi-phasic osteochondral tissue substitutes

    … regarding cell types, mechanical properties and biochemical composition need to be considered. Research questions: In this work, concepts were developed which allow mimicking of osteochondral interfacial layers in a patient-individual and zonally specified manner by 3D extrusion (bio)printing. …

    qucosa-diss

  15. Malleable and Biofunctional Materials for 3D Bioprinting

    Additive manufacturing in biomedical engineering, such as three-dimensional (3D) bioprinting has provided technological platform to pattern extracellular matrix (ECM), cells and vasculature in precise geometries using printable biomaterials known as bioinks. This enables engineering of functional …

    tamu Repository record for Malleable and Biofunctional Materials for 3D Bioprinting (opens in a new tab)

  16. Defect Detection and Process Control in Biological Additive Manufacturing

    … work is to facilitate flaw-free extrusion-based (bio)printing (EBB) of tissue engineering scaffolds. Towards this end goal, this dissertation aims to understand the fundamental process phenomena behind defect formation and to predict flaw occurrence and quality during or prior to the printing …

    nebraska Repository record for Defect Detection and Process Control in Biological Additive Manufacturing (opens in a new tab)

  17. Passive viscoelastic particle focusing within a micro-fluidic device

    … of this is found in droplet-on-demand bio-printing, where the ability to dispense a particle depends sensitively on where within the nozzle the particle is. If particles can be preferentially localized in the ejection region of the nozzle, the likelihood of empty droplets is reduced and …

    ubc Repository record for Passive viscoelastic particle focusing within a micro-fluidic device (opens in a new tab) Download PDF for Passive viscoelastic particle focusing within a micro-fluidic device (opens in a new tab)

  18. Novel Thermoresponsive Hydrogels Based on Poly(2-oxazoline)s and Poly(2-oxazine)s and their Application in Biofabrication

    … were characterized and optimized for the use in biofabrication and applied in initial (bio)printing experiments. Chapter I: The cytocompatible (first in vitro and in vivo studies) amphiphile PMeOx-b-PBzOx-b- PMeOx (A-PBzOx-A) was used for the solubilization of PTX, schizandrin A (SchA), curcumin …

    wurz-thes Repository record for Novel Thermoresponsive Hydrogels Based on Poly(2-oxazoline)s and Poly(2-oxazine)s and their Application in Biofabrication (opens in a new tab)

  19. Development of novel inks and approaches for printing tissues and organs

    … damaged tissues and organs, or to develop biomaterial platforms as in vitro models. Tissue engineering approaches require the fabrication of scaffolds using biomaterials or fabrication of living tissues using cells. As the demands of customized, implantable tissue/organs are increasing and …

    njit Repository record for Development of novel inks and approaches for printing tissues and organs (opens in a new tab)

Page 1 of 2