Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 34 for “"biomedical sensor"”.

  1. ULTRALOW-POWER, LOW-VOLTAGE DIGITAL CIRCUITS FOR BIOMEDICAL SENSOR NODES

    … is customized for effective implementation of biomedical tasks. For the best energy efficiency, a subthreshold implementation of this core in a standard 0.13-µm CMOS process is presented. Lastly, the proposed microcontroller and SRAM block in this work are implemented in a single-chip wireless …

    nus Repository record for ULTRALOW-POWER, LOW-VOLTAGE DIGITAL CIRCUITS FOR BIOMEDICAL SENSOR NODES (opens in a new tab) Download file for ULTRALOW-POWER, LOW-VOLTAGE DIGITAL CIRCUITS FOR BIOMEDICAL SENSOR NODES (opens in a new tab)

  2. Biomedical sensor for transcutaneous oxygen measurements using thick film technology

    … the disadvantages presented, a new type of sensor for transcutaneous blood gas measurement was investigated, employing thick film technology, which is an excellent technique to produce sensors in bulk, as it is cost effective and easy for reproducible fabrication.<br/>This thesis describes …

    soton Download PDF for Biomedical sensor for transcutaneous oxygen measurements using thick film technology (opens in a new tab)

  3. Fluorescence Resonance Energy Transfer (FRET) systems for biomedical sensor applications

    … Resonance Energy Transfer (FRET) for biomedical sensor applications. FRET is a process by which energy is transferred, via long range dipole-dipole interactions, from a donor molecule (D) in an excited electronic state to an acceptor molecule (A). The emission band of D must overlap …

    dcu Download PDF for Fluorescence Resonance Energy Transfer (FRET) systems for biomedical sensor applications (opens in a new tab)

  4. LOW- VOLTAGE HIGH EFFICIENCY ANALOG-TO-DIGITAL CONVERTER FOR BIOMEDICAL SENSOR INTERFACE

    … of low-power high-efficiency ADC dedicated for biomedical sensor interface. An energy-efficient dual-capacitive-array architecture for successive approximation (SA) ADC is proposed. Unlike conventional topologies, the proposed architecture utilizes two capacitive arrays for quantization to …

    nus Repository record for LOW- VOLTAGE HIGH EFFICIENCY ANALOG-TO-DIGITAL CONVERTER FOR BIOMEDICAL SENSOR INTERFACE (opens in a new tab) Download file for LOW- VOLTAGE HIGH EFFICIENCY ANALOG-TO-DIGITAL CONVERTER FOR BIOMEDICAL SENSOR INTERFACE (opens in a new tab)

  5. Low power low noise analog front-end IC design for biomedical sensor interface

    … low-power, low-noise analog front-end ICs for biomedical sensor interface. A cross-domain optimization technique that balances the power consumption between analog and digital blocks was explored. The technique was applied to the design of several sensor interface chips, which include a 445nW …

    nus Repository record for Low power low noise analog front-end IC design for biomedical sensor interface (opens in a new tab) Download file for Low power low noise analog front-end IC design for biomedical sensor interface (opens in a new tab)

  6. Medium Access Control Protocols And Routing Algorithms For Wireless Sensor Networks

    … scale deployment and use of wireless ad hoc and sensor networks. Wireless Sensor Networks consist of battery powered, tiny and cheap "motes", having sensing and wireless communication capabilities. Although wireless motes have limited battery power, communication and computation capabilities, the …

    ucf Repository record for Medium Access Control Protocols And Routing Algorithms For Wireless Sensor Networks (opens in a new tab)

  7. A Resilient Micro-Power Charge Amplifier for Biomedical Applications

    … interface is knitted by enormous varieties of sensor electronic systems. Biomedical sensor systems gain special interests simply because they save lives. An implanted glucose sensor system acknowledges the diabetes patient a concentration increase before symptoms. A respiratory sensor system …

    utk-theses Repository record for A Resilient Micro-Power Charge Amplifier for Biomedical Applications (opens in a new tab)

  8. The application of electrochemical and QCM sensors in studying interactions involving high molecular weight compounds /

    … on the development and characterization of biosensors based on self-assembled monolayers (SAMs) on gold surfaces for studying interactions of high molecular weight compounds. A modifying enzyme and protein markers were selected as model systems to integrate genetic and immunological aspects of …

    vilnius Repository record for The application of electrochemical and QCM sensors in studying interactions involving high molecular weight compounds / (opens in a new tab)

  9. A microwave radiometer system for use in biomedical applications.

    The biomedical industry is a rapidly growing sector and demands are increasing for the production of safe and noninvasive technologies. With the current surge of diabetes, a very desirable application for these technologies is a non-invasive monitor for blood glucose level. Recently, microwave …

    baylor Repository record for A microwave radiometer system for use in biomedical applications. (opens in a new tab)

  10. DESIGN OF ENERGY EFFICIENT WEARABLE ECG SYSTEM AND LOW POWER ASYNCHRONOUS MICROCONTROLLER

    … low power asynchronous 8051 microcontroller for biomedical sensor interface device. It is motivated by the increasing awareness of Cardiac arrhythmias due to population ageing. There are two designs of wearable ECG system in this work. The first design is a Wireless ECG Plaster prototype device. …

    nus Repository record for DESIGN OF ENERGY EFFICIENT WEARABLE ECG SYSTEM AND LOW POWER ASYNCHRONOUS MICROCONTROLLER (opens in a new tab) Download file for DESIGN OF ENERGY EFFICIENT WEARABLE ECG SYSTEM AND LOW POWER ASYNCHRONOUS MICROCONTROLLER (opens in a new tab)

  11. FIT FOR USE ASSESSMENT OF BIOZEN AS A BIOMETRIC SENSOR CONCENTRATOR FOR REMOTE PATIENT MONITORING

    … This thesis evaluates BioZen, a DHA-owned biomedical sensor concentrator designed to run on a mobile phone, as a remote patient-monitoring tool. From this analysis, several key measures of effectiveness and measures of performance for remote patient-monitoring tools are identified and …

    nps Repository record for FIT FOR USE ASSESSMENT OF BIOZEN AS A BIOMETRIC SENSOR CONCENTRATOR FOR REMOTE PATIENT MONITORING (opens in a new tab)

  12. Study of New Functionalized Nanomaterials for Non-Invasive Point-of-Care Biosensor Devices

    … exciting areas of research as nanomaterial-based biomedical sensing devices. In this thesis, two major nanomaterials, KWO for application in diabetes and MXene for cancer management and further improvement of the KWO diabetes sensor, are intensively researched. KWO shows great potential as a …

    ndsu Repository record for Study of New Functionalized Nanomaterials for Non-Invasive Point-of-Care Biosensor Devices (opens in a new tab)

  13. Medium Access Control and Networking Protocols for the Intra-Body Network

    Biomedical applications offer an exciting growth opportunity for wireless sensor networks. However, radio frequency communication is problematic in hospital environments that are susceptible to interference in the industrial, scientific, and medical (ISM) bands. Also, RF is inherently insecure as …

    byu Repository record for Medium Access Control and Networking Protocols for the Intra-Body Network (opens in a new tab) Download PDF for Medium Access Control and Networking Protocols for the Intra-Body Network (opens in a new tab)

  14. Low-Voltage Bulk-Driven Amplifier Design and Its Application in Implantable Biomedical Sensors

    … a significant component of the implantable biomedical sensor system since the integrated circuits (ICs) inside for monitoring different physiological functions consume a great amount of power. One method to reduce the volume of the powering unit is to minimize the power supply voltage of the …

    utk-theses Repository record for Low-Voltage Bulk-Driven Amplifier Design and Its Application in Implantable Biomedical Sensors (opens in a new tab)

  15. Design of a low-power dual-rail asynchronous 8051 microcontroller

    … as a general purpose processing unit in a biomedical sensor interface system with a possibly varying supply voltage in the range of 1V to 3.3V. At the top level, the proposed asynchronous 8051 microcontroller can be divided into four major parts: the asynchronous 8051 core, the synchronous …

    nus Repository record for Design of a low-power dual-rail asynchronous 8051 microcontroller (opens in a new tab) Download file for Design of a low-power dual-rail asynchronous 8051 microcontroller (opens in a new tab)

  16. Design and implementation of ultra-low-power sensor interface circuits for ECG acquisition

    … the design and implementation of ultra-low-power biomedical sensor interface circuits that are suitable for telemetric medical applications and in particular for wearable ECG devices. It is motivated by the increasing awareness and demand in pervasive and remote personal healthcare services due to …

    nus Repository record for Design and implementation of ultra-low-power sensor interface circuits for ECG acquisition (opens in a new tab) Download file for Design and implementation of ultra-low-power sensor interface circuits for ECG acquisition (opens in a new tab)

  17. A WIRELESS SENSOR SYSTEM AND APPLICATIONS OF TRADITIONAL CHINESE PULSE DIAGNOSIS FOR INDIVIDUAL HEALTHCARE MONITORING

    … health care, it would be useful to have wireless biomedical systems that can monitor various vital signs ofthe elderly and to provide such information to a health care professional. In the orient, one powerful tool in diagnosing and predicting health issues is the Traditional Chinese Pulse …

    mcmaster Repository record for A WIRELESS SENSOR SYSTEM AND APPLICATIONS OF TRADITIONAL CHINESE PULSE DIAGNOSIS FOR INDIVIDUAL HEALTHCARE MONITORING (opens in a new tab)

  18. Integrated Time-based Sensor Interface Circuits for Implant Applications

    … thesis is the design of integrated time-based sensor interface circuits for implant applications, targeted towards monitoring of neurochemical and neuroelectrical signals. The thesis and related publications (I - VI) describe the investigated and implemented circuits. First, a sensor interface …

    aalto Repository record for Integrated Time-based Sensor Interface Circuits for Implant Applications (opens in a new tab)

Page 1 of 2