Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 54 for “"bismaleimide"”.
-
Silica coatings on bismaleimide substrates
Thesis (M.S.)--Michigan State University. Department of Materials Science and Mechanics, 1999
-
Degradation Product Analysis of Bismaleimide Composite
… the thermal and oxidative stabilities of a bismaleimide (BMI) polymer composite reinforced with an intermediate modulus graphite fiber, Cytec®5260/IM7. The composite is aged in helium, nitrogen, and air at elevated temperatures up to 600°C. Its weight change is followed thermogravimetrically …
-
Solvent-free, liquid processable bismaleimide-triazine resins
… is concerned with the development of novel bismaleimide-triazine (BT) resin blends, with particular emphasis being placed on enhancing the understanding of systems that exhibit low temperature processability. These resins combine the chemistries of cyanate ester (CE) and bismaleimide (BMI) …
-
Thermal Analysis of Bismaleimide/Graphite Fiber Composite by TG/FTIR
The purpose of this project was to study the thermal and oxidative stability of a specific polymer composite. A TG/FTIR combined technique was employed to characterize this polymer/graphite fiber composite. The polymer composite sample was decomposed in nitrogen, air, and 3% oxygen atmospheres in a …
-
Modeling and characterization of thermo-oxidative behavior of bismaleimide composites
… thermo-oxidation and cross-linking mechanisms. Bismaleimides (BMIs) are commonly used high-temperature resins for aerospace applications. This work presents the viability of using experimental weight loss to model the spatial distribution of oxidation when the oxidized polymer matrix is not …
-
Development of Bismaleimide/Cyanate Ester Based Aerospace Polymers for Possible Use in NASA's Relaunchable Vehicles Program
… into a single polymer. Because of this gap, bismaleimides and cyanate esters, and possibly combinations of the two, are seen as having potential in applications where ease of processing characteristic of epoxies is desired, but for which temperature resilience better than that of epoxies is …
-
An Investigation on the Effect of Aging and Fatigue Damage on the Mechanical Properties of a Graphite/Bismaleimide Composite
This investigation utilizes the open hole tension (OHT) specimen loaded in tension-tension fatigue under isothermal, fixed frequency conditions. A range of load levels and temperature levels where chosen to assess performance. These loads and temperatures ranged from relatively benign conditions …
-
The improvement of the hygrothermal and mechanical properties of bismaleimide and K3B/IM7 carbon fiber composites through a systematic study of the interphase
Thesis (Ph. D.)--Michigan State University. Department of Materials Science and Mechanics, 1997
-
Dielectric properties and degradation monitoring in polymer-matrix structural composites
… testing. Two aerospace composite systems, bismaleimide/glass-fiber and epoxy/carbon-fiber, are thermo-oxidatively aged at a variety of temperatures. Both aged systems are analyzed via photoacoustic spectroscopy, an abosorbance-based IR spectroscopy technique, while the …
-
Evaluation of plasma sprayed coatings as surface pretreatments for adhesive bonding
… powders included an epoxy, a polyester, a bismaleimide/cyanate ester mixture, and a bismaleimide/LARC TPI 1500 mixture. Inorganic powders, Al₂O₃, AIPO₄, MgO, and SiO₂ were sprayed on aluminum adherends, and TiO₂, TiSi₂, MgO, and SiO₂ were sprayed on titanium adherends. Inorganic coatings …
-
High temperature polymer composites using out-of-autoclave processing
… are commonly used aerospace materials. Bismaleimide based composites are used as a replacement for epoxy systems at higher service temperatures. Aerospace composites are usually manufactured, under high pressure, in an autoclave which requires high capital investments and operating …
-
Surface characterization and adhesive bonding of carbon fiber-reinforced composites
… of carbon fiber/epoxy and carbon fiber/bismaleimide matrix composites was studied. Methyl ethyl ketone (MEK) wipe, peel ply, grit blast and gas plasma treatments were the pretreatments of interest. Chemical and physical changes which occurred in the cured composite surfaces following …
-
Impact failure modes of graphite epoxy composites with embedded superelastic nitinol
… shape memory alloy (SMA) fibers. Graphite/Bismaleimide laminates were embedded with 3% and 6% volume fractions of superelastic nitinol fibers. Quasi-static tests were performed on wide clamped-clamped beams to identify progressive damage mechanisms. Low velocity (13.9 ft/s) impact tests, at …
-
Physical and mechanical behavior of amorphous poly(arylene ether)ketone and poly(arylene ether)ketone modified bismaleimides
… behavior. As a modifier, PAEK cocured with bismaleimide produces network substantially tougher than the unmodified bismaleimide network. Control experiments with non-reactive PAEK oligomers demonstrated the necessity to functionalize the oligomers to produce the toughening effect. Cocured …
-
Binder Jet Additive Manufacturing of Recycled Glass for Composite Tooling Applications
… BJB TC-1614 high temperature epoxy and BMI-1 bismaleimide to enhance mechanical properties. Thermal cycling up to 177 °C demonstrated excellent dimensional stability and negligible cracking. The findings indicate that recycled glass offers a viable and environmentally responsible material …
-
The effect of thickness on the fracture behavior of graphite/bismaleimede laminates with central circular holes
… strengths of Narmco V 5245C-G40-600 graphite/bismaleimide laminates was studied. Tests were run on 8 ply, 40 ply, and 80 ply quasi-isotropic laminates of stacking sequence [0/ ± 45/90]. Both unnotched and notched laminates were tested. Unnotched strength was found to be inversely proportional …
-
Evaluation of bisphenol E cyanate ester for the resin-injection repair of advanced composites
… and the efficiency of BECy in repairing bismaleimide-carbon fiber composite plates was studied through ultrasonic evaluation and compression-after-impact tests.</p>
-
Adhesion of novel high performance polymers to carbon fibers: fiber surface treatment, characterization, and microbond single fiber pull-out test
… polymers, including a phosphorus-containing bismaleimide, a cyanate ester resin, and a pyridine-containing thermoplastic, was evaluated using the microbond single fiber pull-out test. The objective was to determine the chemical and mechanical properties of the fiber and the polymer which …
Page 1 of 3