Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 32 for “"blade stall"”.

  1. Digital Tuft Flow Visualisation of Wind Turbine Blade Stall

    Wind turbines installed in the open atmosphere experience much more complex and highly-varying flow than their counterparts in wind tunnels or numerical simulations. In particular, aerodynamic stall—which occurs often on stall-regulated wind turbines in such variable flow conditions—can affect both …

    waterloo Repository record for Digital Tuft Flow Visualisation of Wind Turbine Blade Stall (opens in a new tab)

  2. Experimental identification of blade stall in axial and edgewise flight conditions

    … led to a reinvigoration of research surrounding blade stall in axial and edgewise conditions. Modern tiltrotor blades are designed to operate in both propeller and rotor mode, thus operating in underexplored regions of the operational flight envelope, where aerodynamic and aeroelastic …

    glasgow Repository record for Experimental identification of blade stall in axial and edgewise flight conditions (opens in a new tab) Download PDF for Experimental identification of blade stall in axial and edgewise flight conditions (opens in a new tab)

  3. Application of airjet vortex generators to control helicopter retreating blade stall

    A unique characteristic of helicopter stall is the occurrence of stall on the retreating side of the rotor disk. Operating in an unsteady environment, the most severe type of stall encountered by the retreating rotor blade is dynamic stall, which limits the helicopter maximum speed, adversely …

    city-london Download PDF for Application of airjet vortex generators to control helicopter retreating blade stall (opens in a new tab)

  4. Investigation of blade stall from a H-46 helicopter dynamic component upgrade test

    <p>The H-46 Sea Knight has been in service since the early 1960's. At current and forecast usage rates there exists a shortfall of aircraft for the Marine medium lift and the Navy vertical replenishment missions until follow-on aircraft are procured. The Dynamic Component Upgrade Program (DCU) was …

    ut-knoxville Repository record for Investigation of blade stall from a H-46 helicopter dynamic component upgrade test (opens in a new tab)

  5. Retreating blade stall control on a NACA 0015 aerofoil by means of a trailing edge flap

    … provide a mechanism for alleviating retreating blade stall. In the present investigation numerical simulations were conducted involving a NACA 0015 aerofoil section fitted with a plain trailing edge (TE) flap. All simulations were conducted using DIVEX, a tool being developed at the University …

    glasgow Download PDF for Retreating blade stall control on a NACA 0015 aerofoil by means of a trailing edge flap (opens in a new tab)

  6. Investigation of increased forward flight velocities of helicopters using second harmonic control and reverse velocity rotor concept

    … of a rotorcraft equipped with Higher Harmonic Stall Control (HHSC) and a Reverse Velocity Rotor (RVR). Current rotorcraft are limited in forward flight speed by retreating blade stall and compressibility effects on the advancing blade. Stall occurs as the blade encounters increasingly severe …

    nps Repository record for Investigation of increased forward flight velocities of helicopters using second harmonic control and reverse velocity rotor concept (opens in a new tab)

  7. Analysis, Validation, Prediction And Fundamental Understanding Of Rotor Blade Loads In An Unsteady Maneuver

    … advanced combat helicopters. These include the blade structural loads, control/pitch-link loads, and swashplate servo loads. Accurate and consistent prediction of maneuver loads is necessary to reduce the risks and costs associated with use of prior flight test data as a basis for design. The …

    maryland Repository record for Analysis, Validation, Prediction And Fundamental Understanding Of Rotor Blade Loads In An Unsteady Maneuver (opens in a new tab)

  8. Analytical investigation of the tilt rotor whirl instability

    … the wing-drive-shaft joints. In addition, each blade has lagging and flapping freedom. Two dimensional aerodynamics, including compressibility and stall effects, are included. Whirl stability boundaries and characteristics are presented. The parameters investigated include both mechanical and …

    vt Repository record for Analytical investigation of the tilt rotor whirl instability (opens in a new tab)

  9. Investigation of magnetohydrodynamic plasma actuators for aerodynamic flow control

    … flow control, specifically, retreating blade stall. A magnetohydrodynamic plasma actuator is comprised of two parallel rail electrodes embedded chord-wise on the upper surface of an airfoil. A pulse forming network generates a low-voltage, high-current repetitive pulsed arc. Self-induced …

    texas Repository record for Investigation of magnetohydrodynamic plasma actuators for aerodynamic flow control (opens in a new tab)

  10. Laser-Doppler velocimeter measurements in a cascade of controlled diffusion compressor blades at stall

    An incipient compressor blade stall has been generated and examined in the Low Speed Cascade Wind Tunnel at the Turbopropulsion Laboratory. The test blades were a controlled-diffusion design with solidity 1.67, and stalling occurred at 10 degrees of incidence above the design inlet air angle. …

    nps Repository record for Laser-Doppler velocimeter measurements in a cascade of controlled diffusion compressor blades at stall (opens in a new tab)

  11. Investigation of the effect of velocity diagram parameters on inlet total-pressure distortions through single-stage subsonic axial-flow compressors

    … at the exit of the rotor, (c) the increase of blade angle of attack in the distorted flow is not sufficient to cause blade stall, and (d) the distorted flow is turned in the rotor passage to the same exit direction, relative to the rotor, as the undistorted flow.>

    vt Repository record for Investigation of the effect of velocity diagram parameters on inlet total-pressure distortions through single-stage subsonic axial-flow compressors (opens in a new tab)

  12. A surface flow visualization study of boundary layer behavior on the blades of a solid-wall compressor cascade at high angles of attack

    … technique was applied to circular arc compressor blades in a solid wall, high aspect ratio cascade for the purpose of describing the transition from corner stall to full blade stall, and the blade surface flow under fully stalled conditions. Photos of the visualizations for three stagger angles …

    vt Repository record for A surface flow visualization study of boundary layer behavior on the blades of a solid-wall compressor cascade at high angles of attack (opens in a new tab)

  13. RPH preliminary design, trend analysis and initial analysis of the NPS Hummingbird.

    … on the main rotor system. This analysis includes blade vibration analysis, retreating blade stall analysis, and power required analysis. Modification of the RPH's main rotor hub, drive train, and landing gear are studied and recommendations presented. This research effort is a continuation of a …

    nps Repository record for RPH preliminary design, trend analysis and initial analysis of the NPS Hummingbird. (opens in a new tab)

  14. Development of a Pulse Modulator for Active Flow Control in Turbomachinery

    … operation is often plagued by rotating stall and surge. Rotating stall and surge can result in loss of engine performance, rapid heating of the blades, and severe mechanical stresses. Traditional methods for suppressing rotating stall and surge only partially protect against rotating …

    tamu Repository record for Development of a Pulse Modulator for Active Flow Control in Turbomachinery (opens in a new tab)

  15. Performance and stalling behavior of an axial-flow compressor subjected to three circumferential inlet distortion levels

    The performance and stalling behavior of an axial-flow compressor subjected to several different inlet distortion patterns was investigated. The effect of inlet distortion on overall compressor performance was determined through the measurement of compressor characteristics for each inlet flow …

    vt Repository record for Performance and stalling behavior of an axial-flow compressor subjected to three circumferential inlet distortion levels (opens in a new tab)

  16. The Influence of Unsteady Wind on the Performance and Aerodynamics of Vertical Axis Wind Turbines

    … performance tests results are presented. Near–blade flow physics during steady wind operation is scrutinised using Particle Image Velocimetry (PIV). Complementing the findings in experiments, numerical simulations using Unsteady Reynolds Averaged Navier–Stokes Computational Fluid Dynamics …

    whiterose Download PDF for The Influence of Unsteady Wind on the Performance and Aerodynamics of Vertical Axis Wind Turbines (opens in a new tab)

  17. Design Methodology for Developing Concept Independent Rotorcraft Analysis and Design Software

    … with empirical correction factors and simplified blade stall models. The ratio of fuel (RF) sizing methodology is used to size the aircraft based on the mission requirements specified by the user. The results of the analysis/design simulations are then displayed in tables and Text Fields in the …

    gatech Repository record for Design Methodology for Developing Concept Independent Rotorcraft Analysis and Design Software (opens in a new tab)

  18. Aeromechanics, Dynamics, and Control of Cycloidal Rotor Based Micro Air Vehicles

    … by using a horizontal rotation axis with blades paral-lel to it and cyclic pitch kinematics to produce lift. Dynamic pitching delays blade stall and altering pitch kinematics can quickly vector thrust increasing maneuverability. Design of cyclorotor-based aircraft is still in incipient …

    tamu Repository record for Aeromechanics, Dynamics, and Control of Cycloidal Rotor Based Micro Air Vehicles (opens in a new tab)

  19. CFD analysis of 3D dynamic stall

    … side of a rotor disk is mainly dictated by the stall characteristics of the blade. Stall under dynamic conditions (Dynamic Stall) is the dominant phenomenon encountered on heavily loaded fast-flying rotors, resulting in an extra lift and excessive pitching moments. Dynamic stall (DS) can be …

    glasgow Download PDF for CFD analysis of 3D dynamic stall (opens in a new tab)

  20. Open Platform for Limit Protection with Carefree Maneuver Applications

    … system is designed that addresses: main rotor blade stall as a steady-state limit; hub moment as a transient structural limit; and pilot induced oscillation as a controllability limit. The limit cue modules in this system make use of static neural networks, adaptive neural networks, and fuzzy …

    gatech Repository record for Open Platform for Limit Protection with Carefree Maneuver Applications (opens in a new tab)

Page 1 of 2