Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 75 for “"blocking layer"”.

  1. ESD SUSCEPTIBILITY STUDY OF 820NM LED DEVICE USED IN ETHERNET LINKS

    … believed to occur in the interface of the etched blocking layer and the wafer substrate. Therefore the etching profile of the n-GaAs blocking layer on top of the p-GaAs substrate was studied. The blocking layer was etched using wet-chemical and Inductively-coupled Plasma (ICP) etcher. The samples …

    nus Repository record for ESD SUSCEPTIBILITY STUDY OF 820NM LED DEVICE USED IN ETHERNET LINKS (opens in a new tab) Download file for ESD SUSCEPTIBILITY STUDY OF 820NM LED DEVICE USED IN ETHERNET LINKS (opens in a new tab)

  2. Modeling low temperature C-V profiling in blocked impurity band detectors

    … of minority carrier doping and the role of blocking layer thickness and minority doping concentration in alternate bias operation. Compensation in the blocking layer is found to play a critical role in determining the net voltage drop in this part of the device under alternate polarity bias. …

    nps Repository record for Modeling low temperature C-V profiling in blocked impurity band detectors (opens in a new tab)

  3. Enhancement of Supercapacitor Energy Storage by Leakage Reduction and Electrode Modification

    … electrode-electrolyte interface called double layer. Various electrode materials including carbon and conducting polymers have been used in supercapacitors. Also, supercapacitors offer high life cycle and high power density among electrochemical energy storage devices. Despite their interesting …

    usf Repository record for Enhancement of Supercapacitor Energy Storage by Leakage Reduction and Electrode Modification (opens in a new tab)

  4. Application of novel gate materials for performance improvement in flash memory devices

    … of high dielectric constant materials as the blocking oxide attracts much research interest. The feasibility of a novel rare earth high-k material, Gd2O3, as the potential candidate for the blocking layer application in SONOS-type flash memory devices is evaluated. The material properties of …

    nus Repository record for Application of novel gate materials for performance improvement in flash memory devices (opens in a new tab) Download file for Application of novel gate materials for performance improvement in flash memory devices (opens in a new tab)

  5. Indirect conversion amorphous selenium photodetectors for medical imaging applications

    … a gain below unity and require a specialized p-layer. In this thesis, an alternative detector to the p-i-n photodetector, which can achieve gain above unity and thus aid in achieving quantum noise limited systems is investigated for large area flat panel imaging. The proposed detector is based …

    waterloo Repository record for Indirect conversion amorphous selenium photodetectors for medical imaging applications (opens in a new tab)

  6. Chinolino darinių su chloro ir amino grupėmis fotoliuminescencijos ir elektroliuminescencijos savybių tyrimas /

    … with amino and chlorine substituents as emission layer material. These substances were synthesized in Vilnius University Faculty of Chemistry. This study was encouraged by the need of new more effective, more stable and less expensive organic material that is suitable for producing OLEDs. This …

    vilnius Repository record for Chinolino darinių su chloro ir amino grupėmis fotoliuminescencijos ir elektroliuminescencijos savybių tyrimas / (opens in a new tab)

  7. High Performance, Low Cost Lateral Metal-Semiconductor-Metal Photodetector for Large Area Indirect X-Ray Imaging

    … process primarily because there is no p+ doped layer in comparison with conventional p-i-n photodiodes. We have reported low dark current lateral a-Si MSM-PD (lower than 20pA/mm2 ) with responsivity of 280mA/W and EQE of 65 percent to green light ( l = 525nm). These improvement are achieved by …

    waterloo Repository record for High Performance, Low Cost Lateral Metal-Semiconductor-Metal Photodetector for Large Area Indirect X-Ray Imaging (opens in a new tab)

  8. Fabrication and Characterization of Thin Films for Heterojunction Solar Cells and Radiation Detectors

    … current (~1 nA at ~1000V). Device with Al/Al2O3 layer as an electron-blocking layer and/or Sb2S3 as a hole-blocking layer further reduced the leakage current of the device and improved performance by controlling carrier transport. Nuclear testing with high-energy alpha (241Am) and neutron (252Cf) …

    south-carolina Repository record for Fabrication and Characterization of Thin Films for Heterojunction Solar Cells and Radiation Detectors (opens in a new tab)

  9. Fundamental study of the fabrication of zinc oxide nanowires and its dye-sensitized solar cell applications

    … It was shown that by incorporating various blocking layers into the design of the cell, the performance of the DSSC can be improved. Specifically, by placing a hybrid blocking layer of TiO₂-P4VP polymer between the substrate and the ZnO nanowires, the conversion efficiency of the cell was 43 …

    gatech Repository record for Fundamental study of the fabrication of zinc oxide nanowires and its dye-sensitized solar cell applications (opens in a new tab)

  10. Perylene Diimide as an Electron Transport Material in Optoelectronics

    … using a slot-die coated perylene diimide hole blocking layer and poly(methyl methacrylate) encapsulation layer. The hole blocking layer reduces the dark current and the poly(methyl methacrylate) encapsulation layer protects the devices from ambient moisture. These devices are compared to …

    sask Repository record for Perylene Diimide as an Electron Transport Material in Optoelectronics (opens in a new tab)

  11. Perylene Diimide as an Electron Transport Material in Optoelectronics

    … using a slot-die coated perylene diimide hole blocking layer and poly(methyl methacrylate) encapsulation layer. The hole blocking layer reduces the dark current and the poly(methyl methacrylate) encapsulation layer protects the devices from ambient moisture. These devices are compared to …

    sask Repository record for Perylene Diimide as an Electron Transport Material in Optoelectronics (opens in a new tab)

  12. Quantum structures in photovoltaic devices

    … is raised by using MoO<sub>3</sub> as a hole blocking layer. Absorption in the squaraine layer is found to be more conducive to current extraction than in the C<sub>70</sub> layer. This is due to better matching of exciton diffusion length and layer thickness in the squaraine and to the …

    oxford Repository record for Quantum structures in photovoltaic devices (opens in a new tab)

  13. Influence of Au nanoparticles on the properties of TiO2 film for use in DSSC

    … film in the UV region. After adding a pure TiO2 blocking layer between the composite and the back contact electrode, the dark current was reduced. Additionally, in the presence of dye-sensitization at low Au levels this structure improved the photocurrent in the visible region.

    nus Repository record for Influence of Au nanoparticles on the properties of TiO2 film for use in DSSC (opens in a new tab) Download file for Influence of Au nanoparticles on the properties of TiO2 film for use in DSSC (opens in a new tab)

  14. USING THE COUPLED MICRO-REACTOR/UHV SURFACE ANALYSIS SYSTEM AND THE QCM-BASED VISCOUS FLOW REACTOR TO STUDY AREA-SELECTIVE DEPOSITION

    … we focus our work on modified process of atomic layer deposition (ALD) and chemical vapor deposition (CVD) to achieve area-selective deposition (ASD). We have been trying to find a pathway to achieve ASD with the formation of a reversible blocking layer exclusively on the non-growth surface. …

    cornell Repository record for USING THE COUPLED MICRO-REACTOR/UHV SURFACE ANALYSIS SYSTEM AND THE QCM-BASED VISCOUS FLOW REACTOR TO STUDY AREA-SELECTIVE DEPOSITION (opens in a new tab)

  15. Development of a Bottom-Up Contacting Method for Use in Nanoelectronic Devices

    … This thesis introduces a dopant-selective atomic layer deposition (ds-ALD) process for the bottom-up fabrication of Pt contacts on Si. The ds-ALD method involves the blanket attachment of a blocking mask, followed by its selective removal with an etchant that targets specific doping concentrations …

    gatech Repository record for Development of a Bottom-Up Contacting Method for Use in Nanoelectronic Devices (opens in a new tab)

  16. Nanostructured Thin Film Electrolyte for Thin Film Solid Oxide Fuel Cells

    … focuses on two main approaches (i.e., the interlayer approach and the electrolyte approach) in order to improve the overall cell performance. First, the design of a thin layer of a vertically-aligned nanocomposite (VAN) structure as an interlayer between the electrolyte and cathode is …

    tamu Repository record for Nanostructured Thin Film Electrolyte for Thin Film Solid Oxide Fuel Cells (opens in a new tab)

  17. Alternate configurations for blocked impurity band detectors

    … by reversing the detector's bias and varying the blocking layer thickness. Modeling indicates that reversing the bias on these detectors provides a larger signal current than standard configurations, while preserving the principal benefits gained from a multilayered device. At the same time, the …

    nps Repository record for Alternate configurations for blocked impurity band detectors (opens in a new tab)

  18. Growth and characterization of III-nitride materials for high efficiency optoelectronic devices by metalorganic chemical vapor deposition

    … of the efficiency droop, and an InAlN electron-blocking layer (EBL) is suggested as a replacement of the conventional AlGaN EBL for improved performance of LED. Optimum growth condition of InAlN layer was developed, and high quality InAlN layer was grown by using metalorganic chemical vapor …

    gatech Repository record for Growth and characterization of III-nitride materials for high efficiency optoelectronic devices by metalorganic chemical vapor deposition (opens in a new tab)

  19. Thermo-oxidation of undoped and W-doped carbon co-deposited films: a study of erosion behaviour and reaction product formation

    … O2, 350 oC, for 8 h. No concentrated surface layer of W or WO3 is observed on the surface. This uniform-depth oxidation behaviour suggests the absence of any kind of “blocking layer”, but rather, since the oxidation-inhibiting action occurred throughout the depth, it is proposed here that …

    toronto-retro Repository record for Thermo-oxidation of undoped and W-doped carbon co-deposited films: a study of erosion behaviour and reaction product formation (opens in a new tab)

  20. Effect of Quantum Barrier on the Performance of Quantum Dot Light-emitting-diodes

    … with a novel architecture where one emitting layer is replaced with a number of active layers separated by PMMA QBs. The wider bandgap of PMMA acts as an electron blocking layer and prevents electrons from passing the active region without producing photons. Thus, the proposed structure can …

    calgary Repository record for Effect of Quantum Barrier on the Performance of Quantum Dot Light-emitting-diodes (opens in a new tab)

Page 1 of 4